Trumpf TruLaser 3080 Fiber

Est. $650,000 - $850,000 Specs verified 2026-10-03 · trumpf.com Updated 2026-10-03

Image: trumpf.com, Trumpf

Key Specifications

X Travel

8,000 mm (315 in)

Y Travel

2,500 mm (98.4 in)

max positioning speed

170 m/min

machine weight

21,850 kg (48,171 lb)

max workpiece weight

4,710 kg (10,384 lb)

max sheet thickness mild steel

22 / 25 / 25 / 30 / 40 mm (0.87 / 0.98 / 0.98 / 1.18 / 1.57 in) with TruFiber 4000 / 6001 / 9001 / 12001 / 24001

How much does the Trumpf TruLaser 3080 Fiber cost?

Estimated price range

Est.$650,000 - $850,000

Our best estimate for a cnc laser cutting machine in this class — not a quote from Trumpf. Configuration moves it a long way.

Overview

The Trumpf TruLaser 3080 Fiber is the 8 m machine of its series: a 2D fiber laser with 8,000 × 2,500 mm (315 × 98.4 in) of travel and a sheet limit of 4,710 kg (10,384 lb). It positions at up to 170 m/min and is listed with five TruFiber lasers from the 4000 to the 24001.

Length is what this machine is for. A long part can be cut in one piece, where a shorter bed would force a split and a joint. The alternative use is batch nesting, with several smaller plates or one very large one loaded for a single long run. The sheet limit grows with the bed: 4,710 kg here against 2,900 kg (6,393 lb) on the TruLaser 3060, which has 6,000 mm (236 in) of X on the same 2,500 mm Y.

The building has to match. The installation is 19,620 mm (772 in) long, 6,968 mm (274 in) wide and 2,200 mm (86.6 in) high, and it weighs 21,850 kg (48,171 lb). Plates 8,000 mm long also need a crane or loading system with the reach and capacity to bring them to the bed, and a route into the hall, none of which is included in those figures.

Thickness capability is set by the laser and is no different from the shorter machines of the series. The TruFiber 4000 is listed for 22 mm (0.87 in) mild steel and 20 mm (0.79 in) stainless and aluminum. At the top, the TruFiber 24001 reaches 40 mm (1.57 in) in all three and 16 mm (0.63 in) in copper. In between, stainless already gets to 40 mm with the 9001, aluminum to 30 mm (1.18 in) with the 9001, and mild steel to 30 mm (1.18 in) only with the 12001. Brass tops out at 12.7 mm (0.50 in).

Full Specifications

Parameter	Value
Max Positioning Speed	170 m/min
Machine Weight	21,850 kg (48,171 lb)
X-Axis Travel	8,000 mm (315 in)
Y-Axis Travel	2,500 mm (98.4 in)
Max Workpiece Weight	4,710 kg (10,384 lb)
Max Sheet Thickness Mild Steel	22 / 25 / 25 / 30 / 40 mm (0.87 / 0.98 / 0.98 / 1.18 / 1.57 in) with TruFiber 4000 / 6001 / 9001 / 12001 / 24001
Max Sheet Thickness Stainless Steel	20 / 25 / 40 / 40 / 40 mm (0.79 / 0.98 / 1.57 / 1.57 / 1.57 in) with TruFiber 4000 / 6001 / 9001 / 12001 / 24001
Max Sheet Thickness Aluminum	20 / 25 / 30 / 30 / 40 mm (0.79 / 0.98 / 1.18 / 1.18 / 1.57 in) with TruFiber 4000 / 6001 / 9001 / 12001 / 24001
Max Sheet Thickness Copper	8 / 10 / 12.7 / 12.7 / 16 mm (0.31 / 0.39 / 0.50 / 0.50 / 0.63 in) with TruFiber 4000 / 6001 / 9001 / 12001 / 24001
Max Sheet Thickness Brass	8 / 10 / 12.7 / 12.7 / 12.7 mm (0.31 / 0.39 / 0.50 / 0.50 / 0.50 in) with TruFiber 4000 / 6001 / 9001 / 12001 / 24001
Floor Space Required	19,620 × 6,968 × 2,200 mm (772 × 274 × 86.6 in)

Specifications sourced from trumpf.com — verified 2026-10-03

Strengths & Limitations

Strengths

8,000 mm (315 in) of X travel with 2,500 mm (98.4 in) of Y
Sheet limit of 4,710 kg (10,384 lb), against 2,900 kg (6,393 lb) on the TruLaser 3060
170 m/min maximum positioning speed
Five TruFiber lasers listed, with mild steel, stainless and aluminum up to 40 mm (1.57 in) on the 24001
Stainless steel up to 40 mm (1.57 in) from the TruFiber 9001

Limitations

The installation is 19,620 mm (772 in) long and 6,968 mm (274 in) wide
Weighs 21,850 kg (48,171 lb), more than the 19,800 kg (43,651 lb) of the TruLaser 3060
Mild steel does not pass 25 mm (0.98 in) until the TruFiber 12001
Brass is limited to 12.7 mm (0.50 in) and copper to 16 mm (0.63 in) even with the largest laser

Best For

Long parts up to 8,000 mm (315 in) cut without a joint Oversize plate up to 8,000 × 2,500 mm and 4,710 kg (10,384 lb) Long cutting runs on a bed loaded with several smaller plates Thick plate up to 40 mm (1.57 in) with the TruFiber 24001

Frequently Asked Questions

01 How long a part can the TruLaser 3080 Fiber cut?

X travel is 8,000 mm (315 in) and Y travel is 2,500 mm (98.4 in). The table carries up to 4,710 kg (10,384 lb). In the same series the TruLaser 3060 has 6,000 mm (236 in) of X and a 2,900 kg (6,393 lb) limit, so the TruLaser 3080 is the one for stock or parts beyond that length.

02 How much hall space does the TruLaser 3080 Fiber require?

The machine measures 19,620 × 6,968 × 2,200 mm (772 × 274 × 86.6 in) and weighs 21,850 kg (48,171 lb). Add the area for staging and loading 8,000 mm plate, plus access for service. Check the crane coverage along the full length of the bed, not only at one end.

03 Does the longer bed change what thickness the TruLaser 3080 Fiber can cut?

No. The limits depend on the laser. Mild steel is listed at 22 mm (0.87 in) with the TruFiber 4000, 25 mm (0.98 in) with the 6001 and 9001, 30 mm (1.18 in) with the 12001 and 40 mm (1.57 in) with the 24001. Stainless steel reaches 40 mm (1.57 in) with the 9001, the 12001 and the 24001.

04 What are the limits for copper and brass on the TruLaser 3080 Fiber?

Both start at 8 mm (0.31 in) with the TruFiber 4000 and 10 mm (0.39 in) with the 6001, and both are listed at 12.7 mm (0.50 in) with the 9001 and 12001. With the TruFiber 24001 copper rises to 16 mm (0.63 in) while brass remains at 12.7 mm (0.50 in).