Salvagnini P4X CNC Press Brake
This model was not found in Salvagnini's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
process
sheet thickness
max sheet size
min flange length
max flange length
bending speed
How much does the Salvagnini P4X CNC Press Brake cost?
Estimated price range
Our best estimate for a cnc press brake in this class — not a quote from Salvagnini. Configuration moves it a long way.
Overview
The Salvagnini P4X CNC Press Brake is listed, despite its name, as a panel bending machine: the process row describes an automatic blank holder working with upper and lower blades. It is not in Salvagnini's current lineup under this name, and the listed figures are unconfirmed.
Those figures give a maximum sheet size of 1500 x 4000 mm and a thickness range of 0.5 - 3.2 mm in mild steel or 0.5 - 2.5 mm in stainless. Flange length runs from a minimum of 3 mm to a maximum of 280 mm. That span decides whether a profile can be formed at all: short return flanges down to 3 mm are possible, sides taller than 280 mm are not.
The drive is servo-electric and bending speed is given as up to 15 bends/min. Programming is Salvagnini SIPS offline, and the integration row describes the machine as FMS compatible with a sorter and a laser cell.
Full Specifications
| Parameter | Value |
|---|---|
| Process | Panel bending (automatic blank holder + upper/lower blades) |
| Sheet Thickness | 0.5 - 3.2 mm mild steel (0.5 - 2.5 mm stainless) |
| Max Sheet Size | 1500 x 4000 mm |
| Min Flange Length | 3 mm |
| Max Flange Length | 280 mm |
| Bending Speed | Up to 15 bends/min |
| Drive Type | Servo-electric |
| Programming | Salvagnini SIPS offline |
| Integration | FMS compatible (sorter, laser cell) |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Flange lengths from a 3 mm minimum to a 280 mm maximum
- Maximum sheet size of 1500 x 4000 mm
- Servo-electric drive with up to 15 bends/min
- Listed as FMS compatible with a sorter and a laser cell
Limitations
- Not in Salvagnini's current lineup under this name; the listed figures are unconfirmed
- Stainless is limited to 0.5 - 2.5 mm against 0.5 - 3.2 mm in mild steel
- No aluminum range, machine weight or electrical supply is listed
Best For
Frequently Asked Questions
01
The listed process is panel bending, with an automatic blank holder and upper and lower blades. That is how a panel bender works, so the name is misleading. The drive is listed as servo-electric and the speed as up to 15 bends/min.
02
The listed figures give a maximum sheet of 1500 x 4000 mm, with 0.5 - 3.2 mm in mild steel and 0.5 - 2.5 mm in stainless. Flanges can be from 3 mm to 280 mm long. No aluminum range is given.
03
The Salvagnini P4X Panel Bender is the model on the maker's site today, listed for steel of 0.5-3.0 mm and aluminum of 0.5-4.0 mm. The listed figures for the P4X CNC Press Brake give 0.5 - 3.2 mm mild steel and a 1500 x 4000 mm sheet, which do not match, so do not assume the two describe the same machine without checking its documentation.
