MultiCam 3000 Series CNC Router

Est. $35,000 – $80,000 Possible older model Updated 2026-10-03

This model was not found in MultiCam's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

Table Size

4x8 ft to 5x12 ft (1220x2440 mm to 1524x3658 mm)

Rapid Traverse

Up to 2000 in/min (50 m/min)

Spindle Power

7.5 – 18 kW (options)

Accuracy

±0.005 in (±0.127 mm)

x y z travel

96 x 60 x 8 in (2438 x 1524 x 203 mm) standard

spindle speed

Up to 24,000 RPM

How much does the MultiCam 3000 Series CNC Router cost?

Estimated price range

Est.$35,000 – $80,000

Our best estimate for a cnc router in this class — not a quote from MultiCam. Configuration moves it a long way.

Overview

The MultiCam 3000 Series CNC Router is a rack-and-pinion gantry router listed with 96 x 60 x 8 in (2438 x 1524 x 203 mm) of standard travel and spindle options from 7.5 – 18 kW. MultiCam does not show this router in its current lineup. The listed figures are unconfirmed and are most useful as a reference when looking over a used machine.

Table sizes are listed from 4x8 ft to 5x12 ft (1220x2440 mm to 1524x3658 mm). The standard travel covers a 96 x 60 in sheet, and a 5x10 option extends that to 120 × 60 × 8 in (3,048 × 1,524 × 203 mm). Z stays at 8 in (203 mm) on both, so this is a machine for sheet and shallow relief work, not deep moulds or tall fixtures.

The spindle range is wide. A 7.5 kW unit and an 18 kW unit make quite different machines, and the speed is listed up to 24,000 RPM, so identify which spindle is fitted before judging what it will cut. The tool changer needs the same care: a 24-position ATC is listed as optional, which means some machines have manual tool changes only.

Rapid traverse is listed up to 2000 in/min (50 m/min) through precision rack and pinion drives, with positioning accuracy of ±0.005 in (±0.127 mm). Parts are held on a multi-zone vacuum table, the gantry is heavy-duty welded steel, and the control is MultiCam EZ Control, PC-based and G-code compatible. Weight is listed at approx. 3,200 – 4,000 kg depending on configuration.

Full Specifications

Parameter	Value
Table Size	4x8 ft to 5x12 ft (1220x2440 mm to 1524x3658 mm)
X Y Z Travel	96 x 60 x 8 in (2438 x 1524 x 203 mm) standard
Spindle Motor Power	7.5 – 18 kW (options)
Spindle Speed	Up to 24,000 RPM
Drive System	Precision rack and pinion
Rapid Traverse Rate	Up to 2000 in/min (50 m/min)
Tool Change	24-position ATC (optional)
Vacuum Hold Down	Multi-zone vacuum table
CNC Control	MultiCam EZ Control (PC-based)
Frame	Heavy-duty welded steel gantry
Working Area X Y Z	96 × 60 × 8 in (2,438 × 1,524 × 203 mm) standard; 120 × 60 × 8 in (3,048 × 1,524 × 203 mm) 5x10 option
Feed Rate	Up to 2,000 in/min (50 m/min) rapid
Positioning Accuracy	±0.005 in (±0.127 mm)
Control System	MultiCam EZ Control (PC-based, G-code compatible)
Table Type	Multi-zone vacuum hold-down
Machine Weight	Approx. 3,200 – 4,000 kg depending on configuration

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Spindle options from 7.5 – 18 kW, listed up to 24,000 RPM
Rapid traverse up to 2000 in/min (50 m/min) on precision rack and pinion drives
Listed positioning accuracy of ±0.005 in (±0.127 mm)
Multi-zone vacuum table under a heavy-duty welded steel gantry
Table sizes from 4x8 ft to 5x12 ft (1220x2440 mm to 1524x3658 mm)

Limitations

Not in MultiCam's current lineup; the listed figures are unconfirmed
The 24-position ATC is optional, so not every machine changes tools automatically
Z travel is 8 in (203 mm)
Approx. 3,200 – 4,000 kg depending on configuration, so moving one needs rigging

Best For

Sheet routing on 4x8 ft to 5x12 ft tables Flat panels held on a multi-zone vacuum table Multi-tool work on machines fitted with the optional 24-position ATC Shallow relief work within 8 in (203 mm) of Z

Frequently Asked Questions

01 Is the 3000 Series router still listed by MultiCam?

No. MultiCam does not show the 3000 Series CNC Router in its current lineup, so it appears to be an older model. The listed figures are unconfirmed and should be checked against the machine and its documents.

02 What sizes were listed?

Table sizes run from 4x8 ft to 5x12 ft (1220x2440 mm to 1524x3658 mm). Standard travel is 96 x 60 x 8 in (2438 x 1524 x 203 mm), and the 5x10 option is listed at 120 × 60 × 8 in (3,048 × 1,524 × 203 mm).

03 Does it have an automatic tool changer?

Only some machines. A 24-position ATC is listed as optional, so a given router may have it or may rely on manual tool changes. Confirm it is fitted and working before buying.

04 What spindle and drive does it use?

Spindle options are listed from 7.5 – 18 kW with speed up to 24,000 RPM. The axes run on precision rack and pinion, with rapid traverse up to 2000 in/min (50 m/min) and positioning accuracy of ±0.005 in (±0.127 mm).