Enshu EV360Te

Est. $120,000 - $200,000 Specs verified 2026-10-03 · enshu.co.jp Updated 2026-10-03

Image: enshu.co.jp, Enshu

Key Specifications

X Travel

600 mm (23.6 in)

Y Travel

360 mm (14.2 in)

Z Travel

300 mm (11.8 in)

Max Spindle

10,000 min-1 (*20,000 min-1 *Option)

Tool Capacity

24 tools

Table Size

650 mm x 350 mm (25.6 in x 13.8 in)

How much does the Enshu EV360Te cost?

Estimated price range

Est.$120,000 - $200,000

Our best estimate for a vertical machining centers (vmc) in this class — not a quote from Enshu. Configuration moves it a long way.

Overview

The Enshu EV360Te is a small BT30 vertical machining center whose figures favour hole-making: its Z axis rapids at 60,000 mm/min (2,362.2 in/min), faster than the 50,000 mm/min (1,969 ipm) of X and Y. Travels are 600 mm (23.6 in), 360 mm (14.2 in) and 300 mm (11.8 in) in X, Y and Z over a 650 mm x 350 mm (25.6 in x 13.8 in) table.

A drilling or tapping cycle is mostly Z motion: approach, feed, retract, move on. Giving Z the highest rapid rate shortens exactly that part of the cycle, and on a part with dozens of holes the saving repeats at every one. X travel of 600 mm (23.6 in) nearly spans the 650 mm (25.6 in) table, so almost the whole table length is usable. On the EV450Te, by comparison, X travel is 560 mm under an 800 x 450 mm table.

The standard spindle runs to 10,000 min-1 on an MAS BT30 shank, with 20,000 min-1 listed as an option. The faster spindle is the one to ask about for small drills and end mills in aluminium, where surface speed is otherwise hard to reach. The table gives no power or torque figure for either. The magazine holds 24 tools. Cutting feed is listed up to 50,000 mm/min (1,968.5 in/min) with AI Advanced preview control.

The limits follow from the size. Z travel is 300 mm (11.8 in), which fixture, part and tool length must share, and the table load is 250 kg (551.2 lbs). For more height and weight the EV450Te has 460 mm of Z and a 500 kg table load on a BT40 spindle.

Full Specifications

Parameter	Value
Table Size	650 mm x 350 mm (25.6 in x 13.8 in)
X-Axis Travel	600 mm (23.6 in)
Y-Axis Travel	360 mm (14.2 in)
Z-Axis Travel	300 mm (11.8 in)
Tool Capacity	24 tools
Rapid Traverse Xy	50,000 mm/min (1,969 ipm)
Rapid Traverse Z	60,000 mm/min (2,362 ipm)
Cutting Feedrate	50,000 mm/min (1,968.5 in/min) *AI Advanced preview control
Max Workpiece Weight	250 kg (551 lb)
Rapid Feedratez	60,000mm/min (2,362.2in/min)
Max Table Load	250 kg (551.2 lbs)
Max Spindle Speed	10,000 min-1 (20,000 min-1 Option)
Tool Shank	MAS BT30

Specifications sourced from enshu.co.jp — verified 2026-10-03

Strengths & Limitations

Strengths

Z-axis rapid of 60,000 mm/min (2,362.2 in/min), above the 50,000 mm/min (1,969 ipm) of X and Y
20,000 min-1 spindle listed as an option to the standard 10,000 min-1
600 mm (23.6 in) of X travel under a 650 mm (25.6 in) table length
24-tool magazine on MAS BT30 shanks
Cutting feed up to 50,000 mm/min (1,968.5 in/min) with AI Advanced preview control

Limitations

Z travel is only 300 mm (11.8 in), shared by fixture, part and tool
Table load is limited to 250 kg (551.2 lbs), fixture included
The 20,000 min-1 spindle is an option; the standard spindle stops at 10,000 min-1
BT30 shank and no listed power figure: not a machine for heavy roughing

Best For

Drilling and tapping patterns with many holes, where Z rapid matters most Small aluminium parts, especially with the optional 20,000 min-1 spindle Plates and long parts up to 600 mm (23.6 in) in X Light fixtures and parts within 250 kg (551.2 lbs)

Frequently Asked Questions

01 Why is the Z rapid faster than X and Y on the EV360Te?

Enshu lists 60,000 mm/min (2,362.2 in/min) for Z and 50,000 mm/min (1,969 ipm) for X and Y. The table does not give a reason, but the effect is clear: drilling and tapping cycles spend much of their non-cutting time retracting and approaching in Z, so a faster Z shortens every hole.

02 What spindle speeds are available on the EV360Te?

The standard spindle reaches 10,000 min-1 and a 20,000 min-1 spindle is listed as an option. Both use an MAS BT30 shank. No power or torque figures are listed, so ask Enshu how the two spindles differ in torque before choosing the faster one for anything other than small tools.

03 How big a part fits the EV360Te?

The table is 650 mm x 350 mm (25.6 in x 13.8 in) and takes up to 250 kg (551.2 lbs). Travels are 600 mm (23.6 in) in X, 360 mm (14.2 in) in Y and 300 mm (11.8 in) in Z. Y travel is slightly more than the table depth, so the full depth of the table is within reach.

04 How does the EV360Te differ from the EV450Te?

The EV360Te is the BT30 machine with 24 tools, a 250 kg (551.2 lbs) table load and 300 mm (11.8 in) of Z. The EV450Te is BT40 with 20 tools, a 500 kg table load and 460 mm of Z, and its X travel is 560 mm against 600 mm (23.6 in) here. Both list 10,000 min-1 as the spindle speed; only the EV360Te lists a 20,000 min-1 option.

05 How many tools does the EV360Te carry?

24 tools, on MAS BT30 shanks. No other magazine size is listed. BT30 tools are small and light, which limits cutter diameter and reach, so check the tool size limits with Enshu if the job needs anything larger than drills, taps and small mills.