DN Solutions DVF 8000 T 50

Est. $500,000 - $700,000 Specs verified 2026-10-02 · dn-solutions.com Updated 2026-10-02

Image: dn-solutions.com, DN Solutions

Key Specifications

X Travel

1,000 mm (39 in)

Y Travel

900 mm (35 in)

Z Travel

800 mm (31 in)

Max Spindle

10,000 rpm

Spindle Taper

HSK-T100

Tool Capacity

How much does the DN Solutions DVF 8000 T 50 cost?

Estimated price range

Est.$500,000 - $700,000

Our best estimate for a 5-axis machining center in this class — not a quote from DN Solutions. Configuration moves it a long way.

Overview

The DN Solutions DVF 8000 T 50 is the heavy-spindle member of the DVF 8000 group: a 5-axis vertical machining center with an 800 mm (31 in) table, an HSK-T100 spindle and 488 N·m (360 ft-lb) of spindle torque, with a top speed of 10,000 rpm. Set against the DVF 8000 T, which lists 118 N·m (87 ft-lb) on HSK-T63 and 18,000 rpm, that is roughly four times the torque for a little over half the speed.

Spindle power is listed as 35/25 kW (47/34 hp), with 37/25 kW (50/34 hp) as an option, where the DVF 8000 T lists 22/18.5 kW (30/25 hp). The combination suits roughing in steel, cast iron and titanium with large face mills and long boring tools, and the HSK-T100 interface gives those tools a larger, stiffer connection than HSK-T63.

More than the spindle changes. Z travel is 800 mm (31 in) where the DVF 8000 T has 685 mm (27 in), while X and Y stay at 1,000 mm (39 in) and 900 mm (35 in). The linear axes are slower: 36 m/min (1,417 ipm) in X and Y and 30 m/min (1,181 ipm) in Z, against 45 m/min (1,772 ipm) on the DVF 8000 T. The magazine holds 40 tools, not 60. The outline is 4,825 × 3,400 mm (190 × 134 in) on the floor and 4,330 mm (171 in) high, so hook height matters, and the listed weight is 25,000 kg (55,116 lb).

The table carries 700 kg (1,543 lb), half the 1,400 kg (3,086 lb) of the DVF 8000. DN's rotary rows for this model read 25 rpm for C and 600 rpm for B. On the DVF 8000 T the 600 rpm figure sits on C, the axis that spins the table for turning, so ask DN which axis runs at 600 rpm here and what torque the table has in turning. For the DVF series DN states that a tool length measurement probe and spindle cooling are provided as standard.

Full Specifications

Parameter	Value
X-Axis Travel	1,000 mm (39 in)
Y-Axis Travel	900 mm (35 in)
Z-Axis Travel	800 mm (31 in)
Rapid Traverse X	36 m/min (1,417 ipm)
Rapid Traverse Y	36 m/min (1,417 ipm)
Rapid Traverse Z	30 m/min (1,181 ipm)
Rapid Traverse C	25 rpm
Rapid Traverse B	600 rpm
Max Spindle Speed	10,000 rpm
Spindle Motor Power	35/25 kW (47/34 hp); option: 37/25 kW (50/34 hp)
Spindle Torque	488 N·m (360 ft-lb)
Spindle Taper	HSK-T100
Table Diameter	800 mm (31 in)
Max Table Load	700 kg (1,543 lb)
Tool Capacity	40
Floor Space Required	4,825 × 3,400 × 4,330 mm (190 × 134 × 171 in)
Machine Weight	25,000 kg (55,116 lb)

Specifications sourced from dn-solutions.com — verified 2026-10-02

Strengths & Limitations

Strengths

488 N·m (360 ft-lb) of spindle torque, roughly four times the 118 N·m (87 ft-lb) of the DVF 8000 T
HSK-T100 spindle interface for large-diameter cutters and long boring tools
800 mm (31 in) of Z travel, against 685 mm (27 in) on the DVF 8000 and the DVF 8000 T
35/25 kW (47/34 hp) spindle power, with 37/25 kW (50/34 hp) as a listed option
A rotary axis listed at 600 rpm on an 800 mm (31 in) table

Limitations

Top speed is 10,000 rpm, where the DVF 8000 T reaches 18,000 rpm, so finishing with small tools takes longer
Rapids of 36 m/min (1,417 ipm) in X and Y and 30 m/min (1,181 ipm) in Z are below the 45 m/min (1,772 ipm) of the DVF 8000 T
The magazine holds 40 tools, against 60 on the DVF 8000 T
Table load is 700 kg (1,543 lb), half the 1,400 kg (3,086 lb) of the DVF 8000
At 4,330 mm (171 in) high it needs more headroom and crane clearance than most 5-axis verticals

Best For

Roughing steel and cast iron on an 800 mm (31 in) 5-axis table Large face mills and boring tools that need HSK-T100 and 488 N·m (360 ft-lb) Tall workpieces that use the 800 mm (31 in) of Z travel 5-axis parts up to 700 kg (1,543 lb) in tough materials

Frequently Asked Questions

01 How does the DVF 8000 T 50 differ from the DVF 8000 T?

In the spindle and in what was changed around it. The DVF 8000 T 50 has an HSK-T100 spindle at 10,000 rpm with 488 N·m (360 ft-lb) and 35/25 kW (47/34 hp), 800 mm (31 in) of Z travel and 40 tools. The DVF 8000 T has an HSK-T63 spindle at 18,000 rpm with 118 N·m (87 ft-lb) and 22/18.5 kW (30/25 hp), 685 mm (27 in) of Z travel and 60 tools. Both carry 700 kg (1,543 lb) on the table and weigh 25,000 kg (55,116 lb).

02 How much spindle torque does the DVF 8000 T 50 have?

The model's column in DN's table gives 488 N·m (360 ft-lb), with 35/25 kW (47/34 hp) of power and 37/25 kW (50/34 hp) as an option. DN's series text mentions a high torque spindle of 426 N.m for the DVF 8000T/50, which does not match the column. The column is the figure used on this page; ask DN to state the torque and the duty rating for the spindle actually quoted.

03 Can the DVF 8000 T 50 turn as well as mill?

DN's line about the table turning function names the DVF 6500T and the DVF 8000T. This model has an HSK-T100 taper, and one of its rotary axes is listed at 600 rpm, which is a turning speed and not a positioning speed. The table prints that figure against B and 25 rpm against C, the opposite of the DVF 8000 T, and it gives no table torque or power. Confirm the turning specification with DN before planning turned features.

04 What size of part fits the DVF 8000 T 50?

The table is 800 mm (31 in) in diameter and rated for 700 kg (1,543 lb), fixture included. Travels are 1,000 mm (39 in) in X, 900 mm (35 in) in Y and 800 mm (31 in) in Z. For heavier parts the DVF 8000 carries 1,400 kg (3,086 lb), but with an ISO 40 spindle at 204 N·m (151 ft-lb).

05 What should be checked before installing a DVF 8000 T 50?

The listed outline is 4,825 mm (190 in) long, 3,400 mm (134 in) wide and 4,330 mm (171 in) high, and the machine weighs 25,000 kg (55,116 lb). Check door and roof clearance for the height, floor capacity for the weight plus a 700 kg (1,543 lb) workpiece, and that a crane or loader can reach the table.