Amada HG 8025
Key Specifications
press capacity
bending length
stroke
approach speed
bending speed
return speed
How much does the Amada HG 8025 cost?
Estimated price range
Our best estimate for a cnc press brake in this class — not a quote from Amada. Configuration moves it a long way.
Overview
The Amada HG 8025 is an 800 kN CNC press brake with a 2600 mm bending length and a 250 mm stroke. It sits at the small end of the HG sizes: the HG 2203 above it weighs 15650 kg, where this machine weighs 7200 kg.
That size suits a cell making brackets, covers and small enclosures more than long panels. The stroke is generous for a machine of this length, the same 250 mm listed for the 2200 kN HG 2203, so tall tooling and deep channels are not ruled out by ram travel. Speeds are 220 mm/s on the approach, 20 mm/s in the bend and 250 mm/s on the return.
Amada's table for this model is short. It gives no open height, throat depth or distance between frames, so ask for those before judging box depth or how far a long sheet can pass through the machine.
Full Specifications
| Parameter | Value |
|---|---|
| Press Capacity | 800 kN |
| Bending Length | 2600 mm |
| Stroke | 250 mm |
| Approach Speed | 220 mm/s |
| Bending Speed | 20 mm/s |
| Return Speed | 250 mm/s |
| Machine Weight | 7200 kg |
Specifications sourced from products.amada.co.jp — verified 2026-10-03
Strengths & Limitations
Strengths
- 250 mm stroke on a 2600 mm machine, the same stroke as the 2200 kN HG 2203
- Fast ram travel: 220 mm/s approach and 250 mm/s return
- 7200 kg machine weight, less than half the 15650 kg of the HG 2203
Limitations
- 800 kN limits thickness on full-length bends; heavier plate needs a larger frame such as the 1700 kN HG 1703
- Bending length stops at 2600 mm
- The published table lists no open height, throat depth or backgauge figures for this model
Best For
Frequently Asked Questions
01
800 kN of press capacity over a bending length of 2600 mm. Whether that covers a given part depends on material, thickness and die opening, so check the job against a bending force chart; the table fixes only the total force and the length.
02
Amada lists a 220 mm/s approach, a 20 mm/s bending speed and a 250 mm/s return over a 250 mm stroke. On small parts with several bends, the approach and return make up most of the ram time, which is where these figures help.
03
7200 kg. For comparison, the HG 2203 is listed at 15650 kg and the HG-2204 at 18500 kg, so this is a much easier machine to rig and place, though floor loading and the route into the building still need checking.
Videos
KD Machinery
Machinery Marketing International
