Yawei PBH-160/4100
Key Specifications
bending force
bending length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBH-160/4100 cost?
Price estimate
We do not have a price for the Yawei PBH-160/4100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei PBH-160/4100 is a 1,600 kN press brake with a bending length of 4,100 mm (161.4 in). It runs a 17.8 kW (23.9 hp) main motor and holds 400 L of oil.
Those hydraulic figures are the ones Yawei prints for its PBC-160/4100. Dimensions are close as well: this machine is 4,630 x 1,600 x 2,720 mm (182.3 x 63.0 x 107.1 in), 1,600 mm wide. The PBC-160/4100 is taller, and it has a longer slider travel of 265 mm (10.4 in). The PBH's ram stroke is 215 mm (8.5 in) and its die setting height 520 mm (20.5 in).
In ram speed the PBH is the brisker in the working position. It lists 170 mm/s; 14 mm/s; 160 mm/s, and the PBC-160/4100 lists 15 mm/s as its middle figure. On long panels with several bends each, that small gain repeats many times a shift.
The bed takes parts up to 3,600 mm (141.7 in) between the uprights, with 410 mm (16.1 in) of throat for longer ones. For four-metre work in medium gauge, such as doors, frames, long covers and trays, 1,600 kN is the usual rating. As with every PBH, Yawei's page gives the table and stops; weight, crowning, control and backgauge are for the quotation.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,600 kN |
| Bending Length | 4,100 mm (161.4 in) |
| Distance Between Columns | 3,600 mm (141.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 215 mm (8.5 in) |
| Die Setting Height | 520 mm (20.5 in) |
| Ram Speed | 170 mm/s; 14 mm/s; 160 mm/s |
| Main Motor Power | 17.8 kW (23.9 hp) |
| Oil Tank Volume | 400 L |
| Machine Dimensions | 4,630 x 1,600 x 2,720 mm (182.3 x 63.0 x 107.1 in) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- 1,600 kN of bending force over 4,100 mm
- Middle ram speed of 14 mm/s, above the 15 mm/s of the PBC-160/4100
- 17.8 kW (23.9 hp) main motor
- 3,600 mm (141.7 in) between uprights
- Overall height under three metres
Limitations
- Ram stroke of 215 mm (8.5 in); the PBC-160/4100 has 265 mm (10.4 in) of slider travel
- Die setting height of 520 mm (20.5 in)
- 400 L of oil in the hydraulic system
- No weight or equipment data on the page
Best For
Frequently Asked Questions
01
Bending force is 1,600 kN and bending length is 4,100 mm (161.4 in). Distance between uprights is 3,600 mm (141.7 in) and throat depth is 410 mm (16.1 in).
02
Motor and tank are the same. The PBC-160/4100 has 265 mm (10.4 in) of slider travel and lists 200 mm/s; 15 mm/s; 170 mm/s. The PBH-160/4100 has a 215 mm (8.5 in) ram stroke and lists 170 mm/s; 14 mm/s; 160 mm/s.
03
Overall dimensions are 4,630 x 1,600 x 2,720 mm (182.3 x 63.0 x 107.1 in) as length, width and height. Die setting height is 520 mm (20.5 in).
04
Main motor power is 17.8 kW (23.9 hp), with an oil tank volume of 400 L. Ram speeds are 170 mm/s; 14 mm/s; 160 mm/s.
