TOS Kuřim SKDY-D (movable table)

Q: How much does the TOS Kuřim SKDY-D (movable table) cost?

The price estimate for the TOS Kuřim SKDY-D (movable table) is uncertain: we have no price for it that we can cite and no estimate we can stand behind, so we give no figure. Configuration, tooling, automation and installation move the final price substantially. A specific price can be requested at https://machinetoolindex.com/machines/tos-kurim-skdy-d-movable-table#price; the request is passed to TOS Kuřim or an authorised dealer.

Specs verified 2026-10-04 · tos-kurim.cz Updated 2026-10-04

Key Specifications

clamping plate diameter

2,500/3,000/4,000/4,500 mm (98.4/118.1/157.5/177.2 in)

max turning diameter

3,000 - 5,500 mm (118.1 - 216.5 in)

machining height

2,000/2,800 mm (78.7/110.2 in)

max workpiece weight

30,000 - 70,000 kg (66,138 - 154,321 lb)

clamping plate speed

250 - 80 rpm

x axis travel

3,000 - 5,500 mm (118.1 - 216.5 in)

How much does the TOS Kuřim SKDY-D (movable table) cost?

Price estimate

Uncertain

We do not have a price for the TOS Kuřim SKDY-D (movable table) that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.

Overview

The TOS Kuřim SKDY-D (movable table) is the smallest and fastest vertical lathe in the catalogue. Its plate turns at 250 - 80 rpm, and plate diameters start at 2,500 mm: the full list is 2,500/3,000/4,000/4,500 mm (98.4/118.1/157.5/177.2 in).

The catalogue gives this variant its own column and a bracketed name, with no separate description. What the name states is that the table moves. In the standard SKDY-D the gantry travels to make the Y axis. The figures here are consistent with a lighter arrangement in which the table does the travelling: Y is 2,500 - 4,000 mm (98.4 - 157.5 in), and workpiece weight is 30,000 - 70,000 kg (66,138 - 154,321 lb), below the standard machine's upper limit. Ask the maker for a layout drawing, since the catalogue shows none.

The cross-rail row is unusual. W is given as 0 - 2,000 mm (0 - 78.7 in), written as a range from zero where the other columns list fixed strokes. Ram extension is 2,000/2,500 mm (78.7/98.4 in) on a 340 x 340 mm (13.4 x 13.4 in) ram, and machining height 2,000/2,800 mm (78.7/110.2 in). X travel and maximum machining diameter are both 3,000 - 5,500 mm (118.1 - 216.5 in).

Higher plate speed widens the range of diameters that can be turned at a sensible surface speed, which matters on smaller rings and on inner bores. Cutting force is 40 kN. The guideways are sliding on Z and linear profile on X, Y and W, as on the standard D class.

Full Specifications

Parameter	Value
Clamping Plate Diameter	2,500/3,000/4,000/4,500 mm (98.4/118.1/157.5/177.2 in)
Max Turning Diameter	3,000 - 5,500 mm (118.1 - 216.5 in)
Machining Height	2,000/2,800 mm (78.7/110.2 in)
Max Workpiece Weight	30,000 - 70,000 kg (66,138 - 154,321 lb)
Clamping Plate Speed	250 - 80 rpm
X Axis Travel	3,000 - 5,500 mm (118.1 - 216.5 in)
Y Axis Travel	2,500 - 4,000 mm (98.4 - 157.5 in)
Z Axis Travel Ram	2,000/2,500 mm (78.7/98.4 in)
W Axis Travel Cross Rail	0 - 2,000 mm (0 - 78.7 in)
Ram Cross Section	340 x 340 mm (13.4 x 13.4 in)
Cutting Force	40 kN
Z Axis Guideways	sliding
X Y W Axis Guideways	linear profile

Specifications sourced from tos-kurim.cz — verified 2026-10-04

Strengths & Limitations

Strengths

Plate speed of 250 - 80 rpm, the highest among the maker's vertical lathes
Smaller plates from 2,500 mm, in four sizes up to 4,500 mm
Y axis travel of 2,500 - 4,000 mm (98.4 - 157.5 in) for off-centre milling and drilling
Linear profile guideways on X, Y and W

Limitations

Workpiece weight ends at 70,000 kg; the SKDY-D goes to 100,000 kg (220,459 lb)
Maximum machining diameter of 5,500 mm, against 6,000 mm (236.2 in) on the SKDY-D
The catalogue does not describe how the movable table is arranged
Cutting force of 40 kN, the lighter of the two figures in the SKDY table

Best For

Mid-size rings and discs of 3,000 - 5,500 mm (118.1 - 216.5 in) machining diameter Turning that needs plate speeds up to 250 rpm Turn-mill parts of 30,000 - 70,000 kg (66,138 - 154,321 lb)

Frequently Asked Questions

01 What is different about the SKDY-D (movable table)?

It is a separate column in the SKDY table with smaller plates, 2,500/3,000/4,000/4,500 mm (98.4/118.1/157.5/177.2 in), a faster plate at 250 - 80 rpm and lower workpiece weight, 30,000 - 70,000 kg (66,138 - 154,321 lb). The name indicates a moving table; the catalogue adds no further description.

02 What are the travels of the SKDY-D (movable table)?

X 3,000 - 5,500 mm (118.1 - 216.5 in), Y 2,500 - 4,000 mm (98.4 - 157.5 in), ram extension in Z 2,000/2,500 mm (78.7/98.4 in) and cross-rail stroke in W 0 - 2,000 mm (0 - 78.7 in).

03 How large a part can the SKDY-D (movable table) turn?

Maximum machining diameter is 3,000 - 5,500 mm (118.1 - 216.5 in), depending on the plate, and machining height is 2,000/2,800 mm (78.7/110.2 in). The workpiece can weigh 30,000 - 70,000 kg (66,138 - 154,321 lb).

04 Does the SKDY-D (movable table) change milling heads automatically?

The SKDY feature list, which covers all three columns, states automatic exchange of tool holders and milling heads. It also lists a multifunctional design with milling and grinding function and a ram with a built-in milling spindle as an option.