Starrag Bumotec 191neo
Image: starrag.com, Starrag
Key Specifications
Tool Capacity
simultaneous axes
bar capacity
configurations
vice retaking units
high pressure coolant
How much does the Starrag Bumotec 191neo cost?
Estimated price range
Our best estimate for a 5-axis machining center in this class — not a quote from Starrag. Configuration moves it a long way.
Overview
The Starrag Bumotec 191neo is a 5-axis simultaneous machining center for bar work, built as one platform with 12 possible configurations. Starrag lists up to 7 axes and 3 spindles, three bar capacities of Ø 42, 50 or 65 mm, and a magazine of up to 90 tools.
The configuration count is the point of this machine. A buyer is not choosing a fixed specification but picking a bar size, a number of axes and spindles, and a back-working arrangement from the same base. For the second side of the part Starrag lists vice retaking units, identified as P and PRM, with 1 to 3 positions. They are an option, so a machine quoted without them finishes only what can be reached before the part is cut off.
Two more items that bar work usually depends on are also options and not standard equipment: high-pressure coolant and the bar stock loader. Check that both are on the quotation if the machine is meant to run unattended.
The Bumotec s191V is listed with a single 50 mm (1.97 in) bar capacity; the 191neo offers that size plus 42 mm and 65 mm. Travels, spindle speed and spindle power are not in the published table for the 191neo, so those have to come from Starrag for the configuration chosen.
Full Specifications
| Parameter | Value |
|---|---|
| Simultaneous Axes | 5-axis simultaneous (up to 7 axes, 3 spindles) |
| Bar Capacity | Ø 42/50/65 mm |
| Tool Capacity | Up to 90 tools |
| Configurations | 12 possible on 1 platform |
| Vice Retaking Units | Optional (P/PRM) with 1-3 positions |
| High Pressure Coolant | Optional |
| Bar Stock Loader | Optional |
Specifications sourced from starrag.com — verified 2026-10-03
Strengths & Limitations
Strengths
- 12 possible configurations on 1 platform, with up to 7 axes and 3 spindles
- Three bar capacities to choose from: Ø 42, 50 or 65 mm
- Up to 90 tools in the magazine, enough to keep several part families set up at once
- Vice retaking units with 1 to 3 positions are available for machining the cut-off side
Limitations
- Vice retaking units (P and PRM) are optional, so second-side machining is not part of the base machine
- High-pressure coolant and the bar stock loader are both listed as options
- Starrag's table gives no travels, spindle speed or power for the 191neo; these depend on the configuration
Best For
Frequently Asked Questions
01
Starrag lists three bar capacities: Ø 42, 50 or 65 mm. The capacity is part of the configuration chosen, and the bar stock loader itself is listed as an option, so state the bar diameter and the loader when asking for a quotation.
02
Starrag lists 12 possible configurations on 1 platform, with 5-axis simultaneous machining and up to 7 axes and 3 spindles at the top of the range. The published table does not break down which axes and spindles each configuration includes.
03
No. The vice retaking units, listed under the codes P and PRM, are optional and come with 1 to 3 positions. High-pressure coolant and the bar stock loader are also listed as options.
04
On bar size, the Bumotec s191V is listed at 50 mm (1.97 in) while the 191neo is offered at Ø 42, 50 or 65 mm. On tools, the Bumotec s191V has 30, 60 or 90 positions and the 191neo is listed with up to 90 tools. The 191neo table adds the choice of 12 configurations, which the s191V data does not mention.
Videos
Starrag TV
MTDCNC
MTDCNC
Starrag TV
More from Starrag
Other 5-Axis Machining Centers
Chiron DZ 12 FX S
Hartford Aero-646B
Fidia ARIAL 40
Victor Taichung Vcenter-AX380
AWEA LG-10070
