PAMA Speedmat HPT
Key Specifications
x axis travel
y axis travel
z axis travel
swing diameter
turning table size
turning table load
How much does the PAMA Speedmat HPT cost?
Price estimate
We do not have a price for the PAMA Speedmat HPT that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
A turning table that runs at up to 350 rpm turns the Speedmat HP into the PAMA Speedmat HPT, a horizontal multitasking machine. The part is clamped once on a table of Ø1,250 - Ø2,500 mm, turned with the table rotating, then milled, drilled and bored in five axes with the same head.
This suits parts that are round in the main but carry features a lathe cannot make: flanged casings, valve bodies, landing gear components, large bearing housings. Doing both jobs in one clamping removes the concentricity error that comes from moving a part between a vertical lathe and a machining center.
PAMA's turning tables, which it calls TTR, are hydrostatic, like its milling tables. Load capacity on the HPT is up to 15,000 kg. That is less than half of what the milling-only HP table carries, and it is the first figure to check: a turning table has to spin the load, not just hold it.
The working area is a little smaller than the HP's. Swing diameter is 2,200 - 3,800 mm, X travel 2,200 - 3,800 mm, Y 1,700 - 3,000 mm and Z 2,000 - 3,200 mm. The technical sheet shows four sizes for the turning version.
Heads are shared with the HP. The HVA head, with its axis inclined at 45°, has 74 kW (99.2 hp) and reaches 8,000 / 12,500 rpm. The AHD head lists 55 / 66 / 105 kW and 750 / 320 / 1,035 Nm. Linear rapids are up to 50,000 mm/min. Whether turning tools are held in the milling head or in a dedicated attachment is not stated on the sheet and should be settled at quotation.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 2,200 - 3,800 mm |
| Y Axis Travel | 1,700 - 3,000 mm |
| Z Axis Travel | 2,000 - 3,200 mm |
| Swing Diameter | 2,200 - 3,800 mm |
| Turning Table Size | Ø1,250 - Ø2,500 mm |
| Turning Table Load | up to 15,000 kg |
| Turning Speed | up to 350 rpm |
| Hva Headstock Transmission | Direct Drive |
| Hva Headstock Spindle Power S1 | 74 kW (99.2 hp) |
| Hva Headstock Spindle Torque S1 | 609 / 286 Nm |
| Hva Headstock Spindle Speed | 8,000 / 12,500 rpm |
| Hva Headstock A Axis Contouring Torque | 4,000 Nm (2,950 lb-ft) |
| Hva Headstock A Axis Clamping Torque | 8,000 Nm (5,901 lb-ft) |
| Ahd Headstock Transmission | Direct Drive |
| Ahd Headstock Spindle Power S1 | 55 / 66 / 105 kW |
| Ahd Headstock Spindle Torque S1 | 750 / 320 / 1,035 Nm |
| Ahd Headstock Spindle Speed | 6,000 / 12,000 / 6,000 rpm |
| Ahd Headstock A Axis Contouring Torque | 8,000 Nm (5,901 lb-ft) |
| Ahd Headstock A Axis Clamping Torque | 12,000 Nm (8,851 lb-ft) |
| Rapid Traverse Xyz | up to 50,000 mm/min |
Specifications sourced from pamamachinetools.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Hydrostatic turning table of Ø1,250 - Ø2,500 mm at up to 350 rpm
- Turning and five-axis milling in one clamping
- Same HVA and AHD heads as the Speedmat HP, up to 105 kW
- A axis clamping torque of 12,000 Nm (8,851 lb-ft) on the AHD head
- Rapid feed up to 50,000 mm/min on X, Y and Z
Limitations
- Table load is up to 15,000 kg, against up to 35,000 kg on the milling-only Speedmat HP
- Swing diameter ends at 3,800 mm
- Four sizes only, fewer than the HP
- The sheet gives no turning power or torque figure for the table
Best For
Frequently Asked Questions
01
It is the milling and turning multitasking version of the Speedmat HP. PAMA fits a turning table of Ø1,250 - Ø2,500 mm with a load capacity up to 15,000 kg and a turning speed up to 350 rpm, and keeps the T-type structure and the five-axis heads of the HP.
02
Swing diameter is 2,200 - 3,800 mm across the sizes, on turning tables of Ø1,250 - Ø2,500 mm. Maximum load is up to 15,000 kg. Y travel of 1,700 - 3,000 mm sets the height the head can reach above the table.
03
The HVA head: Direct Drive, 74 kW (99.2 hp), 609 / 286 Nm, 8,000 / 12,500 rpm. Or the AHD head: Direct Drive, 55 / 66 / 105 kW, 750 / 320 / 1,035 Nm, 6,000 / 12,000 / 6,000 rpm. A axis contouring torque is 4,000 Nm (2,950 lb-ft) on the HVA and 8,000 Nm (5,901 lb-ft) on the AHD.
04
The Speedmat HP table only indexes and contours, at up to 10 rpm, and carries up to 35,000 kg. The HPT table rotates the workpiece for turning at up to 350 rpm, and PAMA rates it at up to 15,000 kg. Unbalanced parts will reduce the usable speed further.
More from PAMA
Other Mill-Turn / Multi-Tasking Machines
DMG Mori CTX beta 1250 TC 4A
Mazak INTEGREX i-300
Huron MTX 400
Nakamura-Tome WT-200II
Hyundai WIA L2600SY Series
