Onsrud 265G 5-Axis
Key Specifications
Max Spindle
Tool Capacity
Spindle Power
table size x
table size y
machine length
How much does the Onsrud 265G 5-Axis cost?
Price estimate
We do not have a price for the Onsrud 265G 5-Axis that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Twenty-two feet long, five feet wide, 28 in (711 mm) deep: the Onsrud 265G 5-Axis is a 5-axis moving-gantry router for long three-dimensional parts. Onsrud lists the table at 265 in (6,731 mm) by 61 in (1,550 mm).
Six vacuum zones are standard, three for each half of the bed. On this model the zone count sits where the pattern says it should, between the 217G 5-Axis with 5 and the 300G 5-Axis with 7.
A long, narrow, deep envelope is an unusual shape, and the parts that fit it are particular. Rotor blade and propeller patterns. Spar and longeron tools. Keel and rudder plugs. Long architectural mouldings carved from foam or wood. All of them are many times longer than they are wide, and all need the head to roll around a curved section. For such parts a wider machine would simply be more floor.
The frame is 371 in (9,424 mm) long and 142 in (3,607 mm) wide, and 155 in (3,937 mm) high. Onsrud's upgrade list for the series has a 33 hp (24.6 kW) spindle, a dual gantry and a second tool changer. The base machine carries 18 hp (13.4 kW), 24,000 rpm and 12 tools, and runs from a FANUC interface or Onsrud's touchscreen.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size X | 265 in (6,731 mm) |
| Table Size Y | 61 in (1,550 mm) |
| Machine Length | 371 in (9,424 mm) |
| Machine Width | 142 in (3,607 mm) |
| Machine Height | 155 in (3,937 mm) |
| Vacuum Zones Standard | 6 |
| Spindle Motor Power | 18 hp (13.4 kW) |
| Max Spindle Speed | 24,000 rpm |
| Tool Capacity | 12 (larger capacity tool changers optional) |
| Z Stroke | 28 in (711 mm) |
| Spindle Power Optional | 33 hp (24.6 kW) |
| Dual Gantry | Optional |
| Second Tool Changer | Optional |
Specifications sourced from cronsrud.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 265 in (6,731 mm) by 61 in (1,550 mm) table with a 28 in (711 mm) Z-stroke
- 6 vacuum zones, three per half
- Narrow frame of 142 in (3,607 mm) for a long deep-stroke machine
- Dual gantry and 33 hp (24.6 kW) spindle offered
Limitations
- Machine length of 371 in (9,424 mm)
- Height of 155 in (3,937 mm)
- Table width suits slender parts only
Best For
Frequently Asked Questions
01
265 in (6,731 mm) in X by 61 in (1,550 mm) in Y. Onsrud lists 6 vacuum zones as standard and a 28 in (711 mm) Z-stroke for this code.
02
They serve different work. The 277G 5-Axis is a shallow machine, listed with 16 in or 18 in of Z. The 265G 5-Axis has 28 in of Z and stands 155 in (3,937 mm) high. Its table X is 265 in (6,731 mm).
03
The frame is 371 in (9,424 mm) by 142 in (3,607 mm) and 155 in (3,937 mm) high. A machine this long is usually loaded from the side with a crane or lift, so leave an aisle along its length.
04
A dual gantry is a listed upgrade. Onsrud describes two gantries producing similar parts in tandem, or one being parked while the other machines a large part end to end, which is the usual case for a long pattern.
More from Onsrud
Other CNC Routers
Biesse Rover C 6.15
Komo Xtreme 5-Axis Twin Table
MultiCam 6000 Series CNC Router
Fooke Endura 605L
