Okuma MU-S600V

Est. $200,000 - $350,000 Specs verified 2026-10-03 · okuma.com Updated 2026-10-03

Image: d30jruhmdicmo0.cloudfront.net, Okuma

Key Specifications

X Travel

700 mm (27.6 in)

Tool Capacity

16 (drum) [32 (chain)]

Table Size

400 × 400 mm (15.75 × 15.75 in)

Rapid Traverse

60 m/min (196.85 fpm)

Spindle Power

15/11 kW (20/15 hp)

Max Workpiece ⌀

ø600 mm (23.6 in)

How much does the Okuma MU-S600V cost?

Estimated price range

Est.$200,000 - $350,000

Our best estimate for a 5-axis machining center in this class — not a quote from Okuma. Configuration moves it a long way.

Overview

The Okuma MU-S600V is a 5-axis machining center that pairs a 400 × 400 mm (15.75 × 15.75 in) table with a maximum workpiece diameter of ø600 mm (23.6 in). Its machining volume is 700 × 500 × 500 mm (27.56 × 19.69 × 19.69 in) and the control is the Okuma OSP-P500M.

Two figures set it apart. The rapid rate is 60 m/min (196.85 fpm), where the MU-4000V and MU-6300V are listed at 50 m/min (1,969 ipm). And the standard tool magazine is a 16-tool drum, with a 32-tool chain magazine as the bracketed option, where the MU-4000V and MU-6300V start at 32. A small drum and fast axes describe a machine suited to running a narrow family of parts quickly, not to keeping tooling for many jobs loaded.

The spindle runs from 50 to 12,000 rpm with 15/11 kW (20/15 hp). With only 16 tools as standard, check the tool list of the intended part before assuming the base magazine is enough: a part that needs roughing, finishing, drilling and tapping tools for five sides can use them up quickly.

Full Specifications

Parameter	Value
X-Axis Travel	700 mm (27.6 in)
Table Size	400 × 400 mm (15.75 × 15.75 in)
Max Workpiece Diameter	ø600 mm (23.6 in)
Tool Capacity	16 (drum) [32 (chain)]
CNC Control	Okuma OSP-P500M
Max Machining Volume	700 × 500 × 500 mm (27.56 × 19.69 × 19.69 in)
Rapid Traverse Rate	60 m/min (196.85 fpm)
Spindle Speed	50–12,000 rpm
Spindle Motor Power	15/11 kW (20/15 hp)

Specifications sourced from okuma.com — verified 2026-10-03

Strengths & Limitations

Strengths

60 m/min (196.85 fpm) rapid traverse, above the 50 m/min (1,969 ipm) listed for the MU-4000V
Takes workpieces up to ø600 mm (23.6 in) on a 400 × 400 mm (15.75 × 15.75 in) table
50–12,000 rpm spindle with 15/11 kW (20/15 hp)
Runs on the Okuma OSP-P500M control

Limitations

Standard magazine is a 16-tool drum; the 32-tool chain magazine is an option
The 400 × 400 mm table is small for the ø600 mm (23.6 in) workpiece it may carry, so large parts overhang and need careful fixturing
Okuma's headline rows leave out the table load

Best For

Repeat production of a small family of parts with 16 tools or fewer Short-cycle work that benefits from 60 m/min (196.85 fpm) rapids Round or cubic parts up to ø600 mm (23.6 in) in diameter

Frequently Asked Questions

01 How many tools does the MU-S600V hold?

16 in a drum magazine as standard. A 32-tool chain magazine is listed in brackets as the option. If the part needs more than 16 tools across its five sides, the chain magazine has to be specified at order.

02 What size workpiece fits the MU-S600V?

The maximum workpiece diameter is ø600 mm (23.6 in) on a 400 × 400 mm (15.75 × 15.75 in) table. The machining volume is 700 × 500 × 500 mm (27.56 × 19.69 × 19.69 in), with 700 mm (27.6 in) of X travel. Table load is not stated in Okuma's headline rows.

03 How fast is the MU-S600V?

Rapid traverse is 60 m/min (196.85 fpm). The spindle range is 50–12,000 rpm and power is listed as 15/11 kW (20/15 hp). For comparison, the MU-6300V is listed at 50 m/min (1,969 ipm) rapid.