Hyundai WIA SE2008/SE2008M
This model was not found in Hyundai WIA's current lineup when we checked on 2026-09-24 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.
Image: wiamachine.com, Hyundai WIA
Key Specifications
Max Spindle
Spindle Power
max turning diameter
x axis travel
z axis travel
rapid traverse x
How much does the Hyundai WIA SE2008/SE2008M cost?
Estimated price range
Our best estimate for a cnc lathes / turning center in this class — not a quote from Hyundai WIA. Configuration moves it a long way.
Overview
The Hyundai WIA SE2008/SE2008M is a compact 45 degree slant-bed turning center with a 6,000 RPM belt-driven spindle, 210 mm (8.3 in) of X travel and 330 mm (13 in) of Z travel. It is not in Hyundai WIA's current lineup, so this page mostly serves someone weighing up a used machine, and the listed figures should be confirmed against that machine's plate and manual.
Only one listed row separates the two models. Maximum turning diameter is 370 mm (14.6 in) on the SE2008 and 320 mm (12.6 in) on the SE2008M. Everything else is common: 15/11 kW (20/15 hp) of spindle power, a 12-station turret, linear motion guides and a Fanuc 0i-TF Plus control. Nothing in the rows says what the SE2008M gains for its smaller diameter, so look at the turret and tooling on the actual machine.
Both axes rapid at 36 m/min (1,417 ipm). With 330 mm (13 in) of Z this is a chucker for short parts, and the 6,000 RPM spindle fits that role. No chuck size, torque or turning length is listed. For a current reference point, the SE2200A also runs to 6,000 rpm with 15 / 11 kW (20.1 / 14.8 hp), and lists 340 mm (13.4 in) of Z travel and a 6 in (152 mm) chuck.
Full Specifications
| Parameter | Value |
|---|---|
| Max Turning Diameter | 370 mm (14.6 in) SE2008 / 320 mm (12.6 in) SE2008M |
| Max Spindle Speed | 6,000 RPM |
| Spindle Motor Power | 15/11 kW (20/15 hp) |
| X Axis Travel | 210 mm (8.3 in) |
| Z Axis Travel | 330 mm (13 in) |
| Rapid Traverse X | 36 m/min (1,417 ipm) |
| Rapid Traverse Z | 36 m/min (1,417 ipm) |
| Turret Stations | 12 |
| Guideway Type | Linear motion guides |
| Bed Angle | 45 degrees |
| Spindle Drive | Belt driven |
| CNC Control | Fanuc 0i-TF Plus |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 6,000 RPM spindle with 15/11 kW (20/15 hp), suited to small-diameter turning
- 36 m/min (1,417 ipm) rapids on both X and Z
- 370 mm (14.6 in) of maximum turning diameter on the SE2008
- 12-station turret, linear motion guides and a Fanuc 0i-TF Plus control
Limitations
- Not in Hyundai WIA's current lineup, so any purchase is a used machine
- Z travel is 330 mm (13 in), which rules out long shafts
- No chuck size, spindle torque or maximum turning length is listed
- The SE2008M is limited to 320 mm (12.6 in) of turning diameter
Best For
Frequently Asked Questions
01
In the listed figures, only the maximum turning diameter: 370 mm (14.6 in) on the SE2008 and 320 mm (12.6 in) on the SE2008M. Spindle speed, power, travels, rapids, turret and control are given once for both. The rows do not describe any equipment the SE2008M adds.
02
It does not appear in Hyundai WIA's current lineup. Treat the listed figures as a guide to a used machine and check them against the serial plate and manual. In the present range the SE2200A lists a 6,000 rpm spindle with 15 / 11 kW (20.1 / 14.8 hp) and 340 mm (13.4 in) of Z travel.
03
A belt-driven spindle with a maximum of 6,000 RPM and 15/11 kW (20/15 hp), and a Fanuc 0i-TF Plus control. The bed is at 45 degrees and the turret has 12 stations. Torque and chuck size are not listed.
04
Z travel is 330 mm (13 in) and X travel is 210 mm (8.3 in). No maximum turning length is listed, and the usable length will be shorter than the Z travel once the chuck and jaws are accounted for, so measure on the machine.
More from Hyundai WIA
Other CNC Lathes / Turning Centers
Citizen Miyano GN-3200W
Goodway GA-3300
Honor Seiki VL-500C
