Hurco Horizontal Machining Centers (HMC)

Hurco HM1700Ri

Est. $450,000 - $600,000 (new) Possible older model Specs verified 2026-03-28 · hurco.com Updated 2026-10-03

This model was not found in Hurco's current lineup when we checked on 2026-10-03 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Hurco HM1700Ri Horizontal Machining Centers

Image: hurco.com, Hurco

Key Specifications

X Travel

1,700 mm (66.9 in)

Y Travel

1,200 mm (47.2 in)

Z Travel

900 mm (35.4 in)

Max Spindle

8,000 RPM

Spindle Taper

CAT 50

Tool Capacity

How much does the Hurco HM1700Ri cost?

Estimated price range

Est.$450,000 - $600,000 (new)

Our best estimate for a horizontal machining centers (hmc) in this class — not a quote from Hurco. Configuration moves it a long way.

Overview

The Hurco HM1700Ri is a large horizontal machining center with 1,700 x 1,200 x 900 mm (66.9 x 47.2 x 35.4 in) of X, Y and Z travel, an 800 mm (31.5 in) rotary table on a continuous 360° B axis, and an 8,000 rpm CAT 50 spindle rated 75 hp (56 kW). Hurco no longer lists the HM1700Ri in its current lineup, so a buyer today is looking at a machine with service history behind it and should judge it on the figures below.

The spindle delivers 445.1 Nm (328.7 ft lbs) at 1,200 rpm. That puts the torque where large face mills and boring heads work in steel and cast iron, and the CAT 50 taper is the stiff interface such tools need. The B axis turns at up to 50 rpm, so four sides of a casting can be reached in one setup without re-fixturing, which is the main reason to choose a horizontal of this size.

The 1,200 mm (47.2 in) of Y is generous for a horizontal, allowing tall parts or tombstones. Spindle nose to table is listed as 8 / 43.4 in (203 / 1102 mm). The table quotes two load figures, 1,360 kg (3,000 lb) for the table and 2,000 kg (4,410 lb) for the rotary table; confirm which applies to the configuration on offer before planning heavy work. Rapids are 30 m/min (1,181 ipm) on X, 20 m/min (787 ipm) on Y and 30 m/min on Z, with a programmable feed of up to 20 m/min (787 in/min).

The 30-tool changer runs 3.7 seconds tool to tool and accepts tools up to 120 mm (4.7 in) in diameter, 400 mm (15.7 in) long and 20 kg (44 lb). Installation is substantial: 18,770 kg (41,381 lb), 3,313 mm (130.4 in) of height, a 6,034 x 4,646 mm (238 x 183 in) footprint and a 94 kVA supply. The control is Hurco WinMax, with conversational programming alongside NC.

Full Specifications

Parameter	Value
X-Axis Travel	1,700 mm (66.9 in)
Y-Axis Travel	1,200 mm (47.2 in)
Z-Axis Travel	900 mm (35.4 in)
B Axis Range	360° continuous
Max Spindle Speed	8,000 RPM
Spindle Taper	CAT 50
Spindle Motor Power	75 hp (56 kW)
Spindle Torque	328.7 ft lbs @ 1,200 rpm (445.1 Nm @ 1,200 rpm)
Tool Capacity	30
Tool Change Time	3.7 seconds
Table Size	67 x 36 in (1,651 x 838 mm)
Rotary Table Diameter	800 mm (31.5 in)
Max Table Load	1,360 kg (3,000 lb)
Max Rotary Table Load	2,000 kg (4,410 lb)
Rapid Traverse X	30 m/min (1,181 ipm)
Rapid Traverse Y	20 m/min (787 ipm)
Rapid Traverse Z	30 m/min (1,171 ipm)
Rotary Axis Rapid B	50 RPM
Max Tool Diameter (full magazine)	4.7 in (120 mm)
Max Tool Length	15.7 in (400 mm)
Max Tool Weight	44 lb (20 kg)
Machine Weight	18,770 kg (41,381 lb)
Floor Space	6,034 x 4,646 mm (238 x 183 in)
CNC Control	Hurco WinMax
Travels Capacityx Y Z Axis Travel	66.93 x 47.24 x 35.43 in (1,700 x 1,200 x 900 mm)
B Axis	360° Continuous
Rotary Table Working Surface	31.5" diameter (800 mm diameter)
Max Weight on Table	3,000 lbs (1,360 kg)
Max Weight on Rotary Table	4,410 lbs (2,000 kg)
Spindle Nose to Table	8 / 43.4 in (203 / 1102 mm)
T Slot Size	5 x 0.7 in (122 x 17 mm)
Spindlemax Spindle Speed	8,000 rpm
Tool Changertool Type	CAT 50 (CAT/BT 50)
Tool to Tool ATC Time	3.7 sec
Feedratesrapid Traverse Xyz Axis	1181, 787, 1171 in/min (30, 20, 30 m/min)
Max Programmable Feedrate	787 in/min (20 m/min)
B Axis Max RPM	50 rpm
Sizemax Operating Floor Space	237.6 x 182.9 in (6,0336 x 4,646 mm)
Machine Height	130.4 in (3,313 mm)
Machine Weight	41,381 lb (18,770 kg)
Electricalpower Rating Full Load Kva	94 KVA

Specifications sourced from hurco.com — verified 2026-03-28

Strengths & Limitations

Strengths

1,700 x 1,200 x 900 mm (66.9 x 47.2 x 35.4 in) travels with an 800 mm (31.5 in) rotary table on a continuous 360° B axis
75 hp (56 kW) CAT 50 spindle with 445.1 Nm (328.7 ft lbs) at 1,200 rpm for large face mills and boring
Tools up to 120 mm (4.7 in) in diameter, 400 mm (15.7 in) long and 20 kg (44 lb)
B axis indexes at up to 50 rpm for four-sided work in one setup
1,200 mm (47.2 in) of Y travel for tall parts and tombstones

Limitations

30-tool magazine with a 3.7 second tool change is slow for parts with many short operations
Y rapid is 20 m/min (787 ipm), slower than the 30 m/min on X and Z
Two different load ratings in the table, 1,360 kg (3,000 lb) and 2,000 kg (4,410 lb), need confirming against the actual machine
18,770 kg (41,381 lb) and 94 kVA demand a prepared foundation and a large electrical supply

Best For

Large steel and cast-iron housings machined on four sides Heavy face milling and boring with CAT 50 tooling Tall parts or tombstone fixtures using 1,200 mm (47.2 in) of Y Low-volume large parts where tool-change time is secondary

Frequently Asked Questions

01 What are the HM1700Ri travels and table?

X, Y and Z travel is 1,700 x 1,200 x 900 mm (66.9 x 47.2 x 35.4 in). The rotary table has an 800 mm (31.5 in) working surface on a continuous 360° B axis that turns at up to 50 rpm. Spindle nose to table is listed as 8 / 43.4 in (203 / 1102 mm).

02 What spindle does the HM1700Ri have?

A CAT 50 spindle rated 75 hp (56 kW), running to 8,000 rpm and delivering 445.1 Nm (328.7 ft lbs) at 1,200 rpm. The tool changer holds 30 tools and changes in 3.7 seconds, taking tools up to 120 mm (4.7 in) in diameter, 400 mm (15.7 in) long and 20 kg (44 lb).

03 How does the HM1700Ri compare with the VMX64i-50T?

Both run a CAT 50 spindle to 8,000 rpm. The VMX64i-50T is a vertical with 1,626 x 864 x 762 mm travels and a 22.2 kW (29.7 hp) spindle. The HM1700Ri is a horizontal with 1,700 x 1,200 x 900 mm travels, 75 hp (56 kW) and a rotary B axis for multi-side work.

04 What does the HM1700Ri need for installation?

The machine weighs 18,770 kg (41,381 lb), stands 3,313 mm (130.4 in) high and occupies a 6,034 x 4,646 mm (238 x 183 in) footprint. The full-load power rating is 94 kVA. Check crane access, floor loading and the shop supply before delivery.