Gleason P 90 WM
This model was not found in Gleason's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Max Workpiece ⌀
machine type
process
gear types
tool spindle speed
drive type
How much does the Gleason P 90 WM cost?
Estimated price range
Our best estimate for a cnc gear cutting machine in this class — not a quote from Gleason. Configuration moves it a long way.
Overview
The Gleason P 90 WM is a CNC power skiving machine for small gears, listed with a maximum workpiece diameter of 90 mm (3.54 in) and a tool spindle speed of up to 5,000 rpm. It is not part of Gleason's current lineup, so the listed figures should be verified on the machine itself.
The process row covers internal and external gears, and the gear types are spur and helical. Small internal gears are where skiving is most useful, because a hob cannot work inside a ring. A 90 mm (3.54 in) limit keeps the machine to compact parts.
Two rows describe how the machine holds its accuracy. Direct-drive on all axes is listed, which means no mechanical transmission between motor and axis, and that helps tool and workpiece keep the synchronised rotation skiving relies on. Automatic tool measurement and compensation is listed too. A skiving cutter changes size each time it is reground, so a machine that measures the tool and corrects for it saves a manual offset step after every tool change.
The control is listed as Siemens 840D sl with Gleason gear software. Weight is 6,000 kg (13,228 lb), substantial for a machine with a 90 mm (3.54 in) capacity, and the power supply is 400V, 3-phase, so a site on a different supply needs a transformer. Module range, face width and workpiece spindle speed are not listed.
Full Specifications
| Parameter | Value |
|---|---|
| Machine Type | CNC Power Skiving Machine |
| Max Workpiece Diameter | 90 mm (3.54 in) |
| Process | Power skiving (internal and external gears) |
| Gear Types | Spur and helical gears |
| Tool Spindle Speed | Up to 5,000 rpm |
| Drive Type | Direct-drive on all axes |
| CNC Control | Siemens 840D sl with Gleason gear software |
| Tool Measurement | Automatic tool measurement and compensation |
| Machine Weight | 6,000 kg (13,228 lb) |
| Power Supply | 400V, 3-phase |
Specifications sourced from machinio.com — verified 2026-03-28
Strengths & Limitations
Strengths
- Power skiving of both internal and external gears, spur and helical
- Tool spindle speed of up to 5,000 rpm
- Direct-drive on all axes, with no transmission between motor and axis
- Automatic tool measurement and compensation is listed
- Siemens 840D sl with Gleason gear software
Limitations
- Workpiece diameter is limited to 90 mm (3.54 in)
- No module range, face width or workpiece spindle speed is listed, so tooth size limits are unknown from the table
- Weighs 6,000 kg (13,228 lb) and needs a 400V, 3-phase supply
Best For
Frequently Asked Questions
01
The listed process is power skiving of internal and external gears, and the gear types are spur and helical. The maximum workpiece diameter is 90 mm (3.54 in). The table gives no module range or face width, so those limits have to be established from the machine's documentation.
02
Up to 5,000 rpm. The drive type is listed as direct-drive on all axes. No workpiece spindle speed appears in the table, and in skiving that speed is tied to the tool speed by the tooth counts, so ask for it.
03
The row reads automatic tool measurement and compensation. The machine measures the cutter and applies the correction itself. Since a skiving cutter is a different size after each regrind, that removes a manual measuring and offset step from every tool change.
04
The listed power supply is 400V, 3-phase, and the machine weight is 6,000 kg (13,228 lb). Footprint, connected load and air or coolant requirements are not in the table, so collect them from the nameplate and manuals before moving a machine.
Videos
EMUK GmbH Werkzeugmaschinen
Comparisons
More from Gleason
Gleason 300 GMS
Gleason 300GMS Gear Metrology System
Gleason Genesis 400H CNC Gear Hobbing Machine
Gleason P 800G
Gleason Genesis 260GX
Gleason P600G
Other CNC Gear Cutting Machines
Klingelnberg P 65 Precision Measuring Center
HNK HGG-2000
Klingelnberg G 60
