GF Machining Solutions Cut E 350

Est. $70,000 - $100,000 Specs verified 2026-10-02 · agiecharmilles.com Updated 2026-10-02

Key Specifications

X Travel

350 mm

Y Travel

250 mm

Z Travel

250 mm

machine dimensions wxdxh

1850 x 3050 x 2220 mm

machine weight without dielectric

2845 kg

travel uv

± 45 mm

How much does the GF Machining Solutions Cut E 350 cost?

Estimated price range

Est.$70,000 - $100,000

Our best estimate for a wire edm in this class — not a quote from GF Machining Solutions. Configuration moves it a long way.

Overview

The AgieCharmilles CUT E 350 is the smallest size of GF Machining Solutions' CUT E wire EDM series (CUT E350 / 600 / 800), with 350 x 250 x 250 mm of X, Y and Z travel, ±45 mm on U and V, and wire from 0.10 to 0.30 mm. GF aims the CUT E at everyday production with variable batch sizes, and builds the series with more than 600 integrated machining technologies and its EDM Expert setup strategies.

The tank is generous for the travel. Parts up to 820 x 680 x 250 mm and 400 kg can be loaded, so a die plate much wider than the 350 mm X stroke can be clamped whole and its profiles cut where they fall within reach. Taper is rated at ±30° over 50 mm of height, which covers clearance angles on typical die plates; on thicker sections the ±45 mm U/V stroke allows less.

Among the 350-size machines, the E is the plain production model. The AgieCharmilles CUT P 350 Pro runs wire from 0.05 mm and lists Ra 0.10 µm, while the CUT E 350 starts at 0.10 mm wire and lists Ra 0.14 µm. The AgieCharmilles CUT F 350 shares the E's envelope and wire range but stands 2450 mm tall against 2220 mm here.

The machine measures 1850 x 3050 x 2220 mm (width x depth x height) and weighs 2845 kg without dielectric, so the filled tank adds to that floor load. GF lists the IPG generator, Thermocut wire preparation, automatic threading and anti-collision protection for the series; Turbo Tech, a set of speed-optimised technologies, is optional.

Full Specifications

Parameter	Value
Machine Dimensions Wxdxh	1850 x 3050 x 2220 mm
Machine Weight Without Dielectric	2845 kg
X-Axis Travel	350 mm
Y-Axis Travel	250 mm
Z-Axis Travel	250 mm
Travel Uv	± 45 mm
Best Surface Finish Ra	0.14 μm
Max Workpiece Dimensions	820 x 680 x 250 mm
Max Workpiece Weight	400 kg
Wire Diameters	0.10 - 0.30 mm
Max Taper Angle Height	± 30°/50 mm

Specifications sourced from agiecharmilles.com — verified 2026-10-02

Strengths & Limitations

Strengths

Takes parts up to 820 x 680 x 250 mm and 400 kg on 350 x 250 x 250 mm of travel
The CUT E series includes automatic threading and Thermocut wire preparation for unattended running
EDM Expert strategies and more than 600 integrated technologies in the series, aimed at quick setup
Compact 1850 x 3050 x 2220 mm footprint, 2845 kg without dielectric
±30° taper at 50 mm with ±45 mm of U and V travel

Limitations

Turbo Tech speed-optimised technologies are an option
Wire range starts at 0.10 mm, where the AgieCharmilles CUT P 350 Pro goes down to 0.05 mm
Best listed finish is Ra 0.14 µm, against 0.10 µm on the AgieCharmilles CUT P 350 Pro
The ±30° taper rating applies at 50 mm of height, so steep tapers on thicker parts are restricted

Best For

Everyday production of punches, dies and plates Large plates up to 820 x 680 mm within a 400 kg limit Shops that want quick setup through EDM Expert strategies Clearance cuts up to ±30° on 50 mm sections

Frequently Asked Questions

01 How does the CUT E 350 differ from the CUT F 350?

Both have 350 x 250 x 250 mm of travel, ±45 mm on U and V, 0.10 to 0.30 mm wire and parts up to 820 x 680 x 250 mm and 400 kg. The AgieCharmilles CUT F 350 lists finish separately for carbide (0.14 µm) and steel (0.18 µm) and stands 2450 mm tall against 2220 mm for the E. The two series also differ in their feature lists, so compare them on the work you run.

02 What size part can the CUT E 350 take?

Up to 820 x 680 x 250 mm and 400 kg. The wire reaches 350 x 250 mm in X and Y, so on a large plate the contours must fall within that area, and the fixture counts toward the 400 kg.

03 Which CUT E features are optional?

GF calls Turbo Tech, its speed-optimised machining technologies, optional. The IPG generator, EDM Expert, Thermocut, automatic threading and anti-collision protection are listed for the CUT E series without being called options; confirm the configuration on the quotation.

04 How much floor space and weight should I plan for?

The machine measures 1850 x 3050 x 2220 mm (width x depth x height) and weighs 2845 kg without dielectric. Allow for the filled dielectric on top of that weight, plus access around the machine for loading and wire changes.