DMG Mori DMU 125 P

Est. $900,000 - $1,400,000 Possible older model Updated 2026-10-02

This model was not found in DMG Mori's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

X Travel

1,250 mm (49.2 in)

Y Travel

1,000 mm (39.4 in)

Z Travel

900 mm (35.4 in)

Max Spindle

15,000 RPM (20,000 RPM optional)

Spindle Taper

HSK-A63

Tool Capacity

60 (120/180 optional)

How much does the DMG Mori DMU 125 P cost?

Estimated price range

Est.$900,000 - $1,400,000

Our best estimate for a 5-axis machining center in this class — not a quote from DMG Mori. Configuration moves it a long way.

Overview

The DMG MORI DMU 125 P is a 5-axis machining center listed with 1,250 mm (49.2 in) of X, 1,000 mm (39.4 in) of Y and 900 mm (35.4 in) of Z travel and a 1,400 x 1,000 mm (55.1 x 39.4 in) table that carries 3,000 kg (6,614 lb). The model is not in DMG MORI's current lineup and may be an older one, so anyone looking at a used DMU 125 P should confirm the listed figures against the documentation of the machine itself.

The listed spindle is an HSK-A63 unit with 15,000 rpm, 37 kW (49.6 hp) and 200 Nm, and 20,000 rpm is shown as an option. Set against a 3,000 kg table load, 200 Nm is a moderate torque: the figures describe a machine for 5-axis milling of large parts with medium-sized tools more than one for heavy roughing. Rapid traverse is 40 m/min (1,575 ipm).

The tool magazine is listed at 60 tools, with 120 or 180 optional, so check which one a particular machine has. Swivel range is given as A/B-axis ±90° and positioning accuracy as < 0.006 mm (< 6 µm). At a listed weight of 35,000 kg (77,162 lb), transport and foundation need planning before a purchase. Two controls appear in the listed data, Siemens Sinumerik One and Heidenhain TNC 640 (CELOS X), and which of them is fitted decides the programming and the post-processor.

For orientation, the DMU 125 P duoBLOCK travels 1,250 mm (49.2 in) in X and Y and 1,000 mm (39.4 in) in Z.

Full Specifications

Parameter	Value
X-Axis Travel	1,250 mm (49.2 in)
Y-Axis Travel	1,000 mm (39.4 in)
Z-Axis Travel	900 mm (35.4 in)
Max Spindle Speed	15,000 RPM (20,000 RPM optional)
Spindle Taper	HSK-A63
Spindle Motor Power	37 kW (49.6 hp)
Spindle Torque	200 Nm
Table Size	1,400 x 1,000 mm (55.1 x 39.4 in)
Table Load Capacity	3,000 kg (6,614 lb)
Swivel Range	A/B-axis ±90°
Rapid Traverse Rate	40 m/min (1,575 ipm)
Tool Capacity	60 (120/180 optional)
Positioning Accuracy	< 0.006 mm (< 6 µm)
Machine Weight	35,000 kg (77,162 lb)
CNC Control	Siemens Sinumerik One / Heidenhain TNC 640 (CELOS X)

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Table of 1,400 x 1,000 mm (55.1 x 39.4 in) with a listed load capacity of 3,000 kg (6,614 lb)
HSK-A63 spindle listed at 15,000 rpm with 37 kW (49.6 hp) and 200 Nm
Rapid traverse of 40 m/min (1,575 ipm)
Listed positioning accuracy of < 0.006 mm (< 6 µm)

Limitations

200 Nm of spindle torque is moderate for a table that carries 3,000 kg (6,614 lb)
The 20,000 rpm spindle and the 120 and 180 tool magazines are options, not base equipment
A machine weight of 35,000 kg (77,162 lb) makes relocation and foundation work a real part of the project

Best For

5-axis milling of large parts up to 3,000 kg (6,614 lb) Workpieces that need a 1,400 x 1,000 mm (55.1 x 39.4 in) table Finishing and medium-duty milling at up to 15,000 rpm with HSK-A63 tooling

Frequently Asked Questions

01 Is the DMU 125 P still in DMG MORI's lineup?

It is not in the current lineup and may be an older model. The listed figures here are 1,250 mm (49.2 in) of X, 1,000 mm (39.4 in) of Y and 900 mm (35.4 in) of Z travel. For a used machine, confirm travels, spindle and magazine from its own documentation, because the spindle and the magazine are listed in more than one version.

02 What spindle is listed for the DMU 125 P?

An HSK-A63 spindle with a maximum speed of 15,000 rpm, 37 kW (49.6 hp) and 200 Nm. A 20,000 rpm spindle is listed as optional. On a used machine, check which of the two is installed and ask for its running hours.

03 How much weight can the DMU 125 P table carry?

The listed table load capacity is 3,000 kg (6,614 lb), on a table of 1,400 x 1,000 mm (55.1 x 39.4 in). The table is longer than the 1,250 mm (49.2 in) X travel, so a part that fills the table length is not covered by X travel alone.

04 Which control does the DMU 125 P use?

The listed data names Siemens Sinumerik One and Heidenhain TNC 640 with CELOS X. A given machine has one of them. Check which before buying, since it determines the post-processor, the operators' training and how existing programs can be reused.