Cincinnati XFORM 60XF4
Key Specifications
overall die surface
closed height
stroke length
open height
throat
approach speed
How much does the Cincinnati XFORM 60XF4 cost?
Price estimate
We do not have a price for the Cincinnati XFORM 60XF4 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Cincinnati XFORM 60XF4 is the smallest hydraulic press brake in the XFORM table and the only one built on its own frame dimensions. The overall die surface is 6 ft (1,829 mm). Closed height is 9 in (229 mm), stroke length 11 in (279 mm), open height 20 in (508 mm) and throat 10 in (254 mm). No other XFORM model shares these four figures.
Its ram is tuned for bending speed more than for travel speed. Forming speed is 120 ipm (3,048 mm/min), the highest in the table by a wide margin, while approach is 270 ipm (6,858 mm/min) and return 290 ipm (7,366 mm/min). On short parts with small flanges, where the ram spends most of its stroke in the bend, that mix suits the work.
Cincinnati lists a 5-axis backgage and a 24 in touch screen control with 3D graphics and Bend Simulation software among the XFORM features. A 6-axis backgage and programmable crowning are offered as premium additions. The table does not print a tonnage row, so confirm capacity with the maker.
Full Specifications
| Parameter | Value |
|---|---|
| Overall Die Surface | 6 ft (1,829 mm) |
| Closed Height | 9 in (229 mm) |
| Stroke Length | 11 in (279 mm) |
| Open Height | 20 in (508 mm) |
| Throat | 10 in (254 mm) |
| Approach Speed | 270 ipm (6,858 mm/min) |
| Forming Speed | 120 ipm (3,048 mm/min) |
| Return Speed | 290 ipm (7,366 mm/min) |
Specifications sourced from e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Forming speed of 120 ipm (3,048 mm/min), the fastest of any XFORM model
- Compact 6 ft (1,829 mm) overall die surface for small-part work
- 20 in (508 mm) open height with an 11 in (279 mm) stroke
Limitations
- Throat is 10 in (254 mm), where the XFORM 90XF6 has 18 in (457 mm)
- Approach speed of 270 ipm (6,858 mm/min) is less than half that of the XFORM 90XF6
- The hybrid version of this size is listed without ram speeds, so only the hydraulic model can be compared
Best For
Frequently Asked Questions
01
Overall die surface is 6 ft (1,829 mm). Closed height is 9 in (229 mm), stroke length 11 in (279 mm), open height 20 in (508 mm) and throat 10 in (254 mm).
02
Approach speed is 270 ipm (6,858 mm/min), forming speed 120 ipm (3,048 mm/min) and return speed 290 ipm (7,366 mm/min). The next model up, the XFORM 90XF6, approaches at 650 ipm (16,510 mm/min) but forms at 75 ipm (1,905 mm/min).
