Yawei HLA-1530
Key Specifications
Accuracy
Repeatability
cutting area
x axis travel
y axis travel
z axis travel
How much does the Yawei HLA-1530 cost?
Price estimate
We do not have a price for the Yawei HLA-1530 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Yawei HLA-1530 is a single-table fiber laser cutting machine with an open cutting area, sized for one 3,050 x 1,525 mm (120.1 x 60.0 in) sheet. It is the smallest laser Yawei lists, with a layout of 5,000 x 3,700 x 2,000 mm (196.9 x 145.7 x 78.7 in).
Open and single-table are the two words that define the HLA. There is no exchange table and no enclosure around the cutting area; sheet is loaded and parts are picked directly from the table. Yawei presents this as an advantage for loading and for fitting the machine into varied sites, and puts the electrical cabinet in a separate unit so it can stand where space allows.
The gantry is an open dual-drive design with an aluminium alloy beam on a welded bed, a light moving mass chosen for acceleration. Trajectory speed is 140 m/min. Dust is drawn off through a port beneath the cutting area.
Power options are 3 or 6 kW, and the worktable carries 900 kg (1,984 lb). Z stroke is short at 120 mm (4.7 in), which is fine for flat sheet. X and Y strokes are 3,070 mm (120.9 in) and 1,545 mm (60.8 in); accuracy is ±0.03 mm (±0.0012 in) with ±0.02 mm (±0.0008 in) repositioning. An open table means the laser safety arrangements of the room matter more than with an enclosed machine, so settle those with Yawei and your safety officer before ordering.
Full Specifications
| Parameter | Value |
|---|---|
| Cutting Area | 3,050 x 1,525 mm (120.1 x 60.0 in) |
| X Axis Travel | 3,070 mm (120.9 in) |
| Y Axis Travel | 1,545 mm (60.8 in) |
| Z Axis Travel | 120 mm (4.7 in) |
| Max Trajectory Speed Xy | 140 m/min |
| Positioning Accuracy | ±0.03 mm (±0.0012 in) |
| Repeatability | ±0.02 mm (±0.0008 in) |
| Max Table Load | 900 kg (1,984 lb) |
| Machine Layout Dimensions | 5,000 x 3,700 x 2,000 mm (196.9 x 145.7 x 78.7 in) |
| Laser Power | 3 or 6 kW |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Smallest layout in Yawei's laser range: 5,000 x 3,700 x 2,000 mm
- Open cutting area for direct loading and unloading
- Open gantry dual-drive with an aluminium alloy beam
- Dust extraction port beneath the cutting area
- Separate electrical control cabinet that can be placed to suit the site
Limitations
- Single worktable: cutting stops while sheet is changed
- Open cutting area, so laser safety depends on the installation
- Power limited to 3 or 6 kW
- Z stroke of 120 mm (4.7 in) and a worktable load of 900 kg (1,984 lb)
Best For
Frequently Asked Questions
01
A fiber laser cutting machine with an open gantry dual-drive and a single worktable. Yawei describes the cutting area as open, to make loading and unloading easier and to suit different sites.
02
3,050 x 1,525 mm (120.1 x 60.0 in). X axis stroke is 3,070 mm (120.9 in), Y axis stroke 1,545 mm (60.8 in) and Z axis stroke 120 mm (4.7 in). The worktable load is 900 kg (1,984 lb).
03
The machine layout dimension is 5,000 x 3,700 x 2,000 mm (196.9 x 145.7 x 78.7 in). The electrical control cabinet is separate, which Yawei says lets it adapt to different spatial arrangements.
04
Laser generator power is 3 or 6 kW. Maximum X-Y trajectory speed is 140 m/min, and positioning accuracy is ±0.03 mm (±0.0012 in).
More from Yawei
Other CNC Laser Cutting Machines
Accurl SMART Cube X 1251.25
Dener E-FTL 6035
GF Machining CHARMILLES LASER S 1000 U fs
