Ursviken Optima CNC Press Brake
Key Specifications
press force
maximum bend length
length between side frame
tool space
stroke
How much does the Ursviken Optima CNC Press Brake cost?
Estimated price range
Our best estimate for a cnc press brake in this class — not a quote from Ursviken. Configuration moves it a long way.
Overview
The Ursviken Optima CNC Press Brake is a heavy press brake range for which Ursviken gives every figure as a span: a press force of 400 – 5000+ Ton and a maximum bend length of 4100 – 20200 mm. The table describes the limits of the range, and a quotation fixes each value for one machine.
Two length rows are worth reading together. The length between side frame is 3100 – 16200 mm, shorter than the maximum bend length at both ends of the range. A part bent at full length therefore extends past the side frames, and how deep its flange can be at those points depends on the throat, which the table does not list. Ask for that figure early if the work is long with deep flanges.
The tool space of 485 – 4000 mm and the stroke of 300 – 1500 mm cover everything from ordinary tooling heights to very deep sections. The table lists no back gauge, control or weight, so those also come from the quotation.
Full Specifications
| Parameter | Value |
|---|---|
| Press Force | 400 – 5000+ Ton |
| Maximum Bend Length | 4100 – 20200 mm |
| Length Between Side Frame | 3100 – 16200 mm |
| Tool Space | 485 – 4000 mm |
| Stroke | 300 – 1500 mm |
Specifications sourced from ursviken.com — verified 2026-10-03
Strengths & Limitations
Strengths
- Press force of 400 – 5000+ Ton across the range
- Maximum bend length of 4100 – 20200 mm, for very long parts
- Tool space of 485 – 4000 mm and stroke of 300 – 1500 mm for tall tooling and deep sections
Limitations
- Every figure is a span, so the table does not describe one machine; the values are set in a quotation
- Length between side frame is 3100 – 16200 mm, shorter than the maximum bend length
- No throat depth, back gauge, control or weight is listed
Best For
Frequently Asked Questions
01
Ursviken lists a press force of 400 – 5000+ Ton. The figure for a particular machine is chosen when it is specified, together with its bend length, so compare quotations on those two values first.
02
The maximum bend length is listed as 4100 – 20200 mm and the length between side frame as 3100 – 16200 mm. A bend longer than the side frame opening has to pass the frames, where the throat limits the flange depth.
03
Tool space is listed as 485 – 4000 mm and stroke as 300 – 1500 mm. Both are spans across the range. Match them to the tallest tooling and the deepest part you expect to run before settling on a configuration.
