Ursviken EK 320 CNC Press Brake
This model was not found in Ursviken Technology's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
bending force
working length
throat depth
stroke
open height
back gauge axes
How much does the Ursviken EK 320 CNC Press Brake cost?
Estimated price range
Our best estimate for a cnc press brake in this class — not a quote from Ursviken Technology. Configuration moves it a long way.
Overview
The Ursviken EK 320 is a CNC press brake listed at 3,200 kN (320 tonnes) of bending force over a working length of 3,050 mm in its standard configuration. It does not appear in Ursviken's current lineup, so the listed figures are unconfirmed and should be checked against the machine plate of any example on offer.
That is a high force on a fairly short bed, which points at thick plate and high-strength steel in parts up to 3,050 mm long more than at long, thin panels. The clearances match that kind of work. A 350 mm stroke under a 700 mm open height leaves room for tall tooling and for lifting deep-flanged parts out of the die, and the throat depth is 550 mm.
The back gauge is listed as 5-axis standard, with a 6-axis version optional, and the control is the Ursviken XPERT CNC. At approx. 35,000 kg, the machine needs its foundation and lifting plan settled before delivery.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 3,200 kN (320 tonnes) |
| Working Length | 3,050 mm (standard configuration) |
| Throat Depth | 550 mm |
| Stroke | 350 mm |
| Open Height | 700 mm |
| Back Gauge Axes | 5-axis standard; 6-axis optional |
| Control System | Ursviken XPERT CNC |
| Machine Weight | Approx. 35,000 kg |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 3,200 kN (320 tonnes) of bending force on a 3,050 mm working length
- 350 mm stroke and 700 mm open height give room for tall tooling and deep parts
- 5-axis back gauge listed as standard
- 550 mm throat depth, with the Ursviken XPERT CNC as the listed control
Limitations
- Working length is 3,050 mm in the standard configuration, so longer parts do not fit in one bend
- The 6-axis back gauge is an option, so a given machine may have only the 5-axis one
- A machine weight of approx. 35,000 kg calls for foundation planning
Best For
Frequently Asked Questions
01
The listed bending force is 3,200 kN (320 tonnes) and the working length is 3,050 mm in the standard configuration. What plate thickness that bends depends on the material and the die opening, which the table does not cover.
02
The listed stroke is 350 mm and the open height is 700 mm, with a throat depth of 550 mm. Check the tool clamping and the punch and die heights of the specific machine, since those are not in the listed figures.
03
The back gauge is listed as 5-axis standard with a 6-axis version optional, and the control as the Ursviken XPERT CNC. Confirm on the machine which back gauge was fitted, since that decides how many gauge movements can be programmed.
