Supertec PL-2460CNC
Key Specifications
Max Spindle
Table Size
Spindle Power
x axis travel
z axis travel
distance spindle center to table
How much does the Supertec PL-2460CNC cost?
Price estimate
We do not have a price for the Supertec PL-2460CNC that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Long plates are the job of the Supertec PL-2460CNC. Its 600 × 1,500 mm (24 × 60 in) table and 1,500 mm (60 in) of X travel put it at the top of the maker's column-type CNC surface grinders, and the table is rated for 2,000 kg (4,409 lb).
How much overrun does the table have? The hydraulic travel is 1,650 mm (65 in) against a 1,500 mm working length, so the wheel clears each end of a full-length part before reversing. Table speed reaches 25 m/min, fed by a 58 L/min hydraulic pump. Supertec describes the table as a box-type structure travelling on a cushion of oil with no metal-to-metal contact.
Across the table, the wheelhead moves 600 mm (24 in) on Z at 1~15 m/min. The vertical axis rapids at 1.5 m/min. Each has a 1.8 kW (2.4 hp) servo motor, and the description credits positioning accuracy to AC servo motors with pre-tensioned ballscrews. Column guideways are Turcite-B coated and hand scraped.
The wheel is Ø405 × 50 × Ø127 mm (Ø16 × 2 × Ø5 in) on an 11.2 kW (15.0 hp) spindle, top speed 1,800 rpm. There is 700 mm (28 in) between spindle center and table. Supertec's page repeats the smaller model's weight and overall size for this machine, so treat both as unconfirmed and ask for a foundation drawing.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 600 × 1,500 mm (24 × 60 in) |
| X Axis Travel | 1,500 mm (60 in) |
| Z Axis Travel | 600 mm (24 in) |
| Distance Spindle Center to Table | 700 mm (28 in) |
| Max Table Load | 2,000 kg (4,409 lb) |
| X Axis Hydraulic Travel | 1,650 mm (65 in) |
| Hydraulic Pump Capacity | 58 L/min |
| Table Speed Max | 25 m/min |
| X Axis Servo Motor | 2.2 kW (3.0 hp) |
| Y Axis Rapid Traverse | 1.5 m/min |
| Y Axis Handwheel Increment | 0.1 / 0.01 / 0.001 mm |
| Y Axis Servo Motor | 1.8 kW (2.4 hp) |
| Z Axis Rapid Traverse | 1~15 m/min |
| Z Axis Handwheel Increment | 0.1 / 0.01 / 0.001 mm |
| Z Axis Servo Motor | 1.8 kW (2.4 hp) |
| Wheel Size | Ø405 × 50 × Ø127 mm (Ø16 × 2 × Ø5 in) |
| Wheel Linear Velocity | 2,000 m/min |
| Spindle Motor Power | 11.2 kW (15.0 hp) |
| Max Spindle Speed | 1,800 rpm |
| Coolant Pump | 80 L/min 0.7kg/cm2 |
| Hydraulic Pump Motor | 5.2 kW (7.0 hp) |
| Hydraulic Pump | 20 L/min 55kg/cm2 |
| Lubrication Pump | 5.2 L/min 10kg/cm2 |
Specifications sourced from supertec-grinder.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 1,500 mm (60 in) of X travel over a 600 × 1,500 mm (24 × 60 in) table
- Table load of 2,000 kg (4,409 lb)
- 1,650 mm (65 in) of hydraulic travel gives overrun at both ends of a full-length part
- 11.2 kW (15.0 hp) spindle and Ø405 × 50 × Ø127 mm (Ø16 × 2 × Ø5 in) wheel
- Turcite-B coated, hand scraped column guideways, per the maker's description
Limitations
- No separate weight or floor dimensions are published for this length
- Table width is the same 600 mm as the PL-2448CNC, so only length is gained
- Vertical rapid of 1.5 m/min makes large height changes slow
- Hydraulic table drive, with a 5.2 kW (7.0 hp) pump motor
Best For
Frequently Asked Questions
01
X axis travel is 1,500 mm (60 in), with a hydraulic travel of 1,650 mm (65 in). Z axis (cross) travel is 600 mm (24 in). The distance between spindle center and table is 700 mm (28 in), and the table itself measures 600 × 1,500 mm (24 × 60 in).
02
The maximum loading of the table is 2,000 kg (4,409 lb). That figure has to cover the magnetic chuck as well as the workpiece and any fixture, so subtract the chuck weight when checking a heavy job.
03
The table reaches a maximum feeding speed of 25 m/min. The cross axis has a rapid feeding rate of 1~15 m/min and the vertical axis 1.5 m/min. The electronic handwheel moves the vertical and cross axes in steps of 0.1 / 0.01 / 0.001 mm.
04
The feature list for the range includes a balancing stand, electromagnetic chuck, automatic demagnetizer, digital readout, dust collector, radius, angle and parallel dressing attachments, and coolant systems with a paper filter or with a magnetic separator and paper filter. The page does not say which are included as standard.
More from Supertec
Other CNC Grinding Machines
Jingdiao JDLVG800E_A13
Palmary OIG-200DEL35
ANCA FX5
Drake GS:TE240-330MH
Weldon Altaira
