Jingdiao JDLVG800E_A13
Key Specifications
Max Spindle
Spindle Taper
Table Size
Accuracy
Repeatability
x axis travel
How much does the Jingdiao JDLVG800E_A13 cost?
Price estimate
We do not have a price for the Jingdiao JDLVG800E_A13 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Jingdiao JDLVG800E_A13 is the large-format glass grinding machine of the JDLVG line. Jingdiao calls it a special machine for large scale glass grinding and sizes it for glass panels under 35 inches, naming the panels of all-in-one machines as an example. X travel is 860 mm (33.9 in), Y is 620 mm (24.4 in) and the table is 825 × 620 mm (32.5 × 24.4 in).
It departs from its two smaller siblings in almost every mechanical choice. The spindle is a 20,000 rpm BT30 unit, slower and with a larger taper than the ISO20 and HSK-E32 spindles lower in the range, which points to bigger wheels and longer edges. The magazine is a linear type with 9 tools instead of a rotating servo magazine. Z travel is 260 mm (10.2 in), where the JDLVG600E_A10H has 160 mm (6.3 in).
On a panel this size, locating the blank is the slow part of the cycle. The maker addresses it twice: CCD positioning technology finds the panel so that the program can be aligned to it, and an optional glass fixturing device speeds up clamping. Holding is by vacuum, with a vacuum filtration drainage device and a negative pressure gauge protecting the pump.
Cooling comes from a stainless tank with a large-volume pump at the left side and an annular nozzle around the wheel. The door is automatic. The data sheet lists 0.008 / 0.008 / 0.008 mm (X/Y/Z) positioning accuracy, 0.005 / 0.005 / 0.005 mm repeatability and rapids of 15 m/min (591 ipm). The machine weighs 4,500 kg (9,921 lb) and runs on 3-phase 380V / 50Hz.
Full Specifications
| Parameter | Value |
|---|---|
| X Axis Travel | 860 mm (33.9 in) |
| Y Axis Travel | 620 mm (24.4 in) |
| Z Axis Travel | 260 mm (10.2 in) |
| Table Size | 825 × 620 mm (32.5 × 24.4 in) |
| Max Table Load | 100 kg (220 lb) |
| Spindle Type | High-speed Precision Spindle JD130-20-BT30 |
| Max Spindle Speed | 20,000 rpm |
| Spindle Taper | BT30 |
| Tool Magazine | Linear type Tool Magazine (9 Tools) |
| Positioning Accuracy | 0.008 / 0.008 / 0.008 mm (X/Y/Z) |
| Repeatability | 0.005 / 0.005 / 0.005 mm (X/Y/Z) |
| Rapid Traverse Xyz | 15 m/min (591 ipm) |
| Cutting Feed Rate | 10 m/min (394 ipm) |
| Drive System | AC Servo |
| CNC Control | JD50 Control System |
| Power Requirement | 3-phase 380V / 50Hz |
| Air Pressure | ≥0.52 MPa |
| Machine Weight | 4,500 kg (9,921 lb) |
Specifications sourced from en.jingdiao.com — verified 2026-10-04
Strengths & Limitations
Strengths
- Sized for glass panels under 35 inches: 860 mm (33.9 in) of X and 620 mm (24.4 in) of Y
- CCD positioning technology for aligning the program to the panel
- Z travel of 260 mm (10.2 in), more than the 160 mm (6.3 in) of the JDLVG600E_A10H
- Stainless coolant tank with a large-volume pump and an annular nozzle
- Automatic door and linear type tool magazine are standard
Limitations
- The linear magazine holds only 9 tools
- One spindle, 20,000 rpm on BT30; the faster spindles of the smaller JDLVG machines are not listed
- Positioning accuracy of 0.008 / 0.008 / 0.008 mm (X/Y/Z) is looser than the JDLVG600E_A10H
- The glass fixturing device and vacuum filtration drainage device are options on the data sheet
Best For
Frequently Asked Questions
01
Jingdiao states that it is suitable for glass panels under 35 inches, naming all-in-one machine panels as an example. The travels are 860 mm (33.9 in) in X and 620 mm (24.4 in) in Y, and the worktable is 825 × 620 mm (32.5 × 24.4 in).
02
A Jingdiao high-speed precision spindle, the JD130-20-BT30, running to 20,000 rpm with a BT30 tool holder. The product page lists a linear type tool magazine with 9 tools. No optional spindles are shown for this model.
03
The data sheet says CCD positioning technology is adopted to improve production efficiency and product accuracy. A glass fixturing device, which the product page calls a glass positioning mechanism, is optional and is described as making operation easier and clamping faster.
04
It is bigger and simpler. The JDLVG800E_A13 has 860 mm (33.9 in) of X and 260 mm (10.2 in) of Z with one 20,000 rpm BT30 spindle. The JDLVG600E_A10H has 600 mm (23.6 in) of X and 160 mm (6.3 in) of Z, a 32,000 rpm HSK-E32 standard spindle and tighter accuracy figures.
05
The machine weighs 4,500 kg (9,921 lb). The data sheet lists a 3-phase 380V / 50Hz supply and air pressure of ≥0.52 MPa. The maximum table load is 100 kg (220 lb), which covers fixtures comfortably since the panels themselves are light.
More from Jingdiao
Other CNC Grinding Machines
Palmary OIG-200DEL35
ANCA FX5
Drake GS:TE240-330MH
Weldon Altaira
