GF Machining Mikron VCE 1200 Pro
This model was not found in GF Machining Solutions's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.
Image: assets.georgfischer.com, GF Machining Solutions
Key Specifications
X Travel
Y Travel
Z Travel
Max Spindle
Spindle Taper
Tool Capacity
How much does the GF Machining Mikron VCE 1200 Pro cost?
Estimated price range
Our best estimate for a vertical machining centers (vmc) in this class — not a quote from GF Machining Solutions. Configuration moves it a long way.
Overview
GF Machining Solutions does not list the Mikron VCE 1200 Pro among its current machines, and it should be read as a probable earlier model. According to the listed figures it is a long-table vertical machining center with 1,200 mm of X, 600 mm of Y and 675 mm of Z, on a 1,220 x 620 mm table.
Those Y and Z figures match the current Mikron VCE 1400 Pro, which has 1400 x 600 x 675 mm and a 1400 x 620 mm table rated for 1700 kg. Someone weighing a used VCE 1200 Pro against a new machine is therefore choosing mainly between X length and age. The listed VCE 1200 Pro table is 620 mm wide, the same as the current machine, so fixtures should transfer between the two.
The spindle listing gives 16,000 rpm, or 10,000 rpm as an option, with BT40 or HSK-A63 taper; the magazine holds 30, 40 or 60 tools; the control is Heidenhain TNC 640. Feed is listed at 20 m/min and rapids at 40 m/min. Automation listed for the machine is System 3R Workpartner 1+, Transformer WorkMaster and Transformer 6-axis. There is no table load in the listed figures, which matters on a table this long: ask for the plate rating before loading heavy plates.
Full Specifications
| Parameter | Value |
|---|---|
| X-Axis Travel | 1,200 mm (47.2 in) |
| Y-Axis Travel | 600 mm (23.6 in) |
| Z-Axis Travel | 675 mm (26.6 in) |
| Table Size | 1,220 x 620 mm (48.0 x 24.4 in) |
| Max Spindle Speed | 16,000 RPM (10,000 RPM option) |
| Spindle Taper | BT40 / HSK-A63 |
| Tool Capacity | 30 / 40 / 60 pockets |
| CNC Control | Heidenhain TNC 640 |
| Feed Rate X Y Z | 20 m/min |
| Rapid Feed Rate Xy Z | 40 m/min |
| Automation | System 3R Workpartner 1+, Transformer WorkMaster & Transformer 6-axis |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 1,200 mm of X travel on a 1,220 x 620 mm table for long parts
- 675 mm of Z travel in the listed figures, the same as the current Mikron VCE 1400 Pro
- Spindle listed at 16,000 rpm, or 10,000 rpm, with BT40 or HSK-A63 taper
- 30, 40 or 60 tool pockets with a Heidenhain TNC 640 control
Limitations
- Not in GF Machining Solutions' current lineup; support and spares for an older machine need confirming
- Table load is not given in the listed figures, so the plate rating must be checked
- Cutting feed is listed at 20 m/min, below the 32 m/min of the current Mikron VCE 1400 Pro
Best For
Frequently Asked Questions
01
No. It does not appear in GF Machining Solutions' current Mikron lineup and is likely an older model. Check its build year, control software and spindle condition before purchase.
02
The listed figures give 1,200 x 600 x 675 mm of travel and a 1,220 x 620 mm table. A table load is not listed, so read the machine plate or ask the seller.
03
The Mikron VCE 1400 Pro has 1400 x 600 x 675 mm of travel, a 1400 x 620 mm table for 1700 kg and 32 m/min feed. The VCE 1200 Pro shares the Y and Z travel and the 620 mm table width, with 1,200 mm of X.
04
The listed figures name System 3R Workpartner 1+, Transformer WorkMaster and Transformer 6-axis. On a used machine, check whether the robot interface is actually installed, since that is not visible from the specification.
More from GF Machining Solutions
Other Vertical Machining Centers (VMC)
FANUC Robodrill α-D14MiBADV Plus
Hartford MCW-18550
Hurco VMX6030i
Hwacheon SMART UaX
