GF Machining Solutions Cut 2000 S

Est. $250,000 – $360,000 Possible older model Updated 2026-10-02

This model was not found in GF Machining Solutions's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

x y travel

350 x 250 mm

z travel

256 mm

wire diameter range

0.07 – 0.33 mm

max cutting speed

550 mm²/min

surface finish ra

0.05 µm (mirror finishing mode)

max taper angle

±30° / 100 mm height

How much does the GF Machining Solutions Cut 2000 S cost?

Estimated price range

Est.$250,000 – $360,000

Our best estimate for a wire edm in this class — not a quote from GF Machining Solutions. Configuration moves it a long way.

Overview

The AgieCharmilles Cut 2000 S is listed here as a compact wire EDM machine with 350 x 250 mm of X and Y travel and 256 mm of Z. It is not in GF Machining Solutions' current lineup, and the table could not be matched to a GF source, so the figures on this page are listed values for checking a used machine.

The listed workpiece limit is 750 x 550 x 250 mm and 200 kg, so the tank is much larger than the travel: a plate can be clamped whole while the wire works a 350 x 250 mm area of it. The U/V axes are listed at ± 70 mm and the taper at ±30° / 100 mm height. The table carries a wire spool of up to 25 kg.

Two listed rows disagree on wire size. One gives 0.07 – 0.33 mm; the other gives 0.10 - 0.30 mm with 0.05-0.07 optional. On a used machine, find out whether the fine-wire option is fitted before counting on wire below 0.10 mm. The table also lists a 0.05 µm finish in mirror finishing mode and 550 mm²/min cutting speed; ask for a test cut rather than relying on either. The control is listed as GF AC CUT HMI (Fanuc-based) and the machine weight as 3,100 kg.

Full Specifications

Parameter	Value
X Y Travel	350 x 250 mm
Z Travel	256 mm
Wire Diameter Range	0.07 – 0.33 mm
Max Cutting Speed	550 mm²/min
Surface Finish Ra	0.05 µm (mirror finishing mode)
Max Taper Angle	±30° / 100 mm height
Control System	GF AC CUT HMI (Fanuc-based)
Machine Weight	3,100 kg
Travel X Y Z	350 x 250 x 256 mm13.77 x 9.84 x 10 in
Min Surface Roughness Ra	0.05 μm² μin
Max Taper Angle Height	± 30°/100 mm± 30°/3.93 in
Max Workpiece Dimensions	750 x 550 x 250 mm29.5 x 21.6 x 9.8 in
Max Workpiece Weight	200 kg
Travel U V	± 70 mm± 2.7 in
Wire Diameters	0.10 - 0.30 (0.05-0.07 optional) mm0.004 - 0.012 (0.002-0.003 optional) in
Max Wire Spool Weight	25 kg (55.11 lbs)

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Listed workpiece limit of 750 x 550 x 250 mm on 350 x 250 mm of X and Y travel
Listed taper of ±30° / 100 mm height from ± 70 mm of U/V travel
Listed machine weight of 3,100 kg, light for installation
Listed 0.05 µm finish in mirror finishing mode

Limitations

Not in GF's current lineup, and the table is unverified
Listed workpiece weight is only 200 kg
The two listed wire rows disagree, and wire below 0.10 mm is listed as optional
Z travel of 256 mm limits part height to the listed 250 mm

Best For

Small punches, dies and inserts within 350 x 250 mm of travel Light plates up to the listed 200 kg Used-machine buyers looking for a compact wire EDM

Frequently Asked Questions

01 What wire sizes does the Cut 2000 S take?

The listed table is inconsistent: one row gives 0.07 – 0.33 mm, another 0.10 - 0.30 mm with 0.05-0.07 optional. The safe reading is a standard range from 0.10 mm, with finer wire only if the option is fitted. Check the machine's options list.

02 What part size fits the Cut 2000 S?

The listed workpiece limit is 750 x 550 x 250 mm and 200 kg. The wire covers 350 x 250 mm in X and Y and 256 mm in Z, so a larger plate can sit in the tank while only part of it is cut.

03 Is the Cut 2000 S still made?

It is not in GF Machining Solutions' current wire EDM lineup. Treat it as a used machine and confirm the travels, the wire option and the control from the machine itself before buying.

04 What does the Cut 2000 S weigh?

The table lists a machine weight of 3,100 kg and a wire spool of up to 25 kg. It does not say whether the weight includes dielectric, so ask the seller for the shipping weight before booking transport.