GF Machining AgieCharmilles CUT P 1250 Pro

Est. $450,000 - $700,000 Specs verified 2026-10-02 · agiecharmilles.com Updated 2026-10-02

Image: assets.georgfischer.com, GF Machining Solutions

Key Specifications

travel xyz

1250 x 850 x 100 – 800 mm

travel uv

1250 x 850 mm

max taper angle height

30°/800 mm

max workpiece dimensions

2300 x 1300 x 750 mm

max workpiece weight

6000 kg

wire diameters

0.05 - 0.33 mm

How much does the GF Machining AgieCharmilles CUT P 1250 Pro cost?

Estimated price range

Est.$450,000 - $700,000

Our best estimate for a wire edm in this class — not a quote from GF Machining Solutions. Configuration moves it a long way.

Overview

The AgieCharmilles CUT P 1250 Pro is the biggest size in GF Machining Solutions' CUT P precision wire EDM series (CUT P350 / 600 / 800 / 1250), with 1250 x 850 mm of X and Y travel and a Z axis listed from 100 to 800 mm. GF aims the series at high-value parts where small variations matter, and at this size that means large stamping dies, mould plates and tall precision components.

The tank accepts workpieces up to 2300 x 1300 x 750 mm and 6000 kg. A plate that size is far wider than the 1250 x 850 mm stroke, so it can be clamped whole and cut wherever its contours fall inside the travel. Plan the shop around that weight: a 6000 kg blank needs crane capacity and a loading routine, and the table gives no machine weight or footprint, so foundation and floor space have to be confirmed with GF before the machine is ordered.

Taper is rated at 30° at 800 mm of height, with U and V travel of 1250 x 850 mm. That combination lets tall extrusion dies and drafted mould parts be cut in one setup at full height rather than in stages.

Wire runs from 0.05 to 0.33 mm. Fine-wire machining down to 0.05 mm is a series feature that this model's table repeats, so detailed contours and heavy sections can share one machine. The standard spool holds 25 kg, and a 45 kg spool is optional for long unattended cuts. GF lists thermal precision management, calibration algorithms, Spark Track process monitoring and ISPS wire-breakage protection for the series; iWire and a Renishaw probe are options.

Full Specifications

Parameter	Value
Travel Xyz	1250 x 850 x 100 – 800 mm
Travel Uv	1250 x 850 mm
Max Taper Angle Height	30°/800 mm
Max Workpiece Dimensions	2300 x 1300 x 750 mm
Max Workpiece Weight	6000 kg
Wire Diameters	0.05 - 0.33 mm
Wire Spool	25 kg (45 kg optional)

Specifications sourced from agiecharmilles.com — verified 2026-10-02

Strengths & Limitations

Strengths

1250 x 850 mm of X/Y travel with the Z axis listed from 100 to 800 mm
Workpieces up to 2300 x 1300 x 750 mm and 6000 kg
Taper cutting rated at 30° at 800 mm height, with U/V travel of 1250 x 850 mm
Wire from 0.05 to 0.33 mm on one machine, covering fine detail and thick sections
Optional 45 kg wire spool in place of the standard 25 kg, for long unattended cuts
Series features include thermal precision management, calibration algorithms, Spark Track and ISPS wire-breakage protection

Limitations

iWire wire-saving and Renishaw probing are options, not standard
A 6000 kg workpiece rating means lifting gear sized for parts of that weight
The table for this size gives no surface-finish figure, unlike the Ra 0.10 µm listed for the AgieCharmilles CUT P 350 Pro
Machine weight and footprint are not in the table, so foundation and floor space must be confirmed with GF before installation

Best For

Large stamping and progressive dies up to 2300 x 1300 mm Tall tapered parts up to 30° at 800 mm Heavy blanks up to 6000 kg Long unattended cuts using the optional 45 kg spool

Frequently Asked Questions

01 How big a workpiece fits on the CUT P 1250 Pro?

Up to 2300 x 1300 x 750 mm and 6000 kg. Axis travel is 1250 x 850 mm in X and Y, with Z listed from 100 to 800 mm, so the contour must fall within that stroke even on a plate that fills the tank.

02 What taper angle can the CUT P 1250 Pro cut?

30° at a height of 800 mm. The U and V axes travel 1250 x 850 mm, the same as X and Y, so the wire guides have the stroke to hold that angle on tall parts. Parts can be up to 750 mm high.

03 Which features are standard and which are optional?

GF's series page lists thermal precision management, calibration algorithms, Spark Track process monitoring, ISPS wire-breakage protection and the wire circuit design for the CUT P series without calling them optional. iWire, which reduces wire consumption, and Renishaw probing for part positioning are optional. The wire spool is 25 kg as standard, with 45 kg optional.

04 What wire sizes does it handle?

0.05 to 0.33 mm. Fine-wire machining down to 0.05 mm is a CUT P series feature, and this model's own table repeats the 0.05 mm lower limit, so the same machine can cut small detail with fine wire and run thicker wire through heavy sections.

05 How does it compare with the smallest CUT P size?

The AgieCharmilles CUT P 350 Pro has 350 x 250 x 250 mm of travel and takes parts up to 820 x 680 x 250 mm and 400 kg, with a ±30° taper at 50 mm. The CUT P 1250 Pro is for work the smaller machine cannot hold: plates up to 2300 x 1300 mm, 6000 kg, and 30° at 800 mm.