DMG Mori DMU 95 monoBLOCK

Est. $400,000 - $580,000 Specs verified 2026-10-02 · dmgmori.com Updated 2026-10-02

Image: dmgmori.com, DMG Mori

Key Specifications

X Travel

950 mm (37.4 in)

Y Travel

850 mm (33.5 in)

Z Travel

650 mm (25.6 in)

Max Spindle

20,000 rpm (speedMASTER, #40); 15,000 rpm version optional

Tool Capacity

60 pockets as standard; up to 240 pockets

Max Workpiece ⌀

1,040 mm (40.9 in)

How much does the DMG Mori DMU 95 monoBLOCK cost?

Estimated price range

Est.$400,000 - $580,000

Our best estimate for a 5-axis machining center in this class — not a quote from DMG Mori. Configuration moves it a long way.

Overview

A named spindle and a 60-pocket magazine say more about the DMG MORI DMU 95 monoBLOCK than its travels do. The machine is a 5-axis milling center with 950 mm (37.4 in) of X, 850 mm (33.5 in) of Y and 650 mm (25.6 in) of Z, taking workpieces up to 1,040 mm (40.9 in) in diameter, 590 mm (23.2 in) in height and 1,000 kg (2,204.6 lb).

DMG MORI lists a speedMASTER spindle (#40) with 20,000 rpm and 130 Nm, and a 15,000 rpm spindle with 200 Nm as an option. The faster one suits small cutters, finishing and aluminium. The optional one gives up top speed for about 54% more torque, which pays off with larger cutters in steel and cast iron. Either way the spindle question is settled by two published ratings, and speedMASTER spindles come with a 36-month warranty without hour limit.

Tooling capacity is generous from the start. The machine-integrated magazine has 60 pockets as standard and is available with up to 240 pockets. DMG MORI describes the process integration as 5-axis milling, gear cutting and in-process measuring; turning is not on that list.

The weight limit is the figure to check first. A table that accepts 1,040 mm of diameter is rated for 1,000 kg, fixture included, so solid steel parts that fill the diameter can reach the weight limit well before they reach the 590 mm height. The diameter also exceeds the 950 mm of X travel. Loading is through a 1,500 mm wide door opening.

On accuracy DMG MORI states 5 μm positioning accuracy and 30 % higher volumetric accuracy with VCS Complete, supported by a cooling concept and multi-sensor compensation. Automation can be retrofitted with access maintained, commissioning rests on a 3-point support, technical availability is put at ≥ 96 % and GREENMODE at > 30 % reduced energy consumption.

Full Specifications

Parameter	Value
Max Workpiece Diameter	1,040 mm (40.9 in)
Max Workpiece Height	590 mm (23.2 in)
Max Workpiece Weight	1,000 kg (2,204.6 lb)
X-Axis Travel	950 mm (37.4 in)
Y-Axis Travel	850 mm (33.5 in)
Z-Axis Travel	650 mm (25.6 in)
Spindle Torque	130 Nm (20,000 rpm spindle); 200 Nm (optional 15,000 rpm spindle)
Max Spindle Speed	20,000 rpm (speedMASTER, #40); 15,000 rpm version optional
Tool Capacity	60 pockets as standard; up to 240 pockets
Positioning Accuracy	5 μm
Door Opening Width	1,500 mm
Spindle Warranty	36 months without hour limit (speedMASTER spindles)

Specifications sourced from dmgmori.com — verified 2026-10-02

Strengths & Limitations

Strengths

speedMASTER spindle (#40) with 20,000 rpm and 130 Nm, with a 15,000 rpm, 200 Nm version as an option
60 tool pockets as standard in a machine-integrated magazine, with up to 240 pockets available
Stated positioning accuracy of 5 μm with multi-sensor compensation
Gear cutting and in-process measuring are listed alongside 5-axis milling
speedMASTER spindles carry a 36-month warranty without hour limit
Automation does not have to be bought with the machine; DMG MORI lists it as retrofittable

Limitations

Workpiece weight is limited to 1,000 kg (2,204.6 lb) on a table that takes 1,040 mm (40.9 in) of diameter
Workpiece height stops at 590 mm (23.2 in) and Z travel at 650 mm (25.6 in)
The 200 Nm spindle is an option and tops out at 15,000 rpm; the 20,000 rpm spindle has 130 Nm
Turning is not among the listed technologies, which are 5-axis milling, gear cutting and in-process measuring
No spindle power figure is published in the listed data

Best For

5-axis milling of parts up to 1,040 mm (40.9 in) in diameter and 1,000 kg (2,204.6 lb) Small-tool and finishing work at up to 20,000 rpm Steel and cast iron with the optional 200 Nm spindle Jobs with large tool lists, using 60 to 240 pockets Gear cutting with in-process measuring in the same setup

Frequently Asked Questions

01 Which spindles are available on the DMU 95 monoBLOCK?

DMG MORI lists a speedMASTER spindle (#40) with 20,000 rpm and 130 Nm, and 15,000 rpm with 200 Nm as an option. The optional spindle has about 54% more torque and a lower top speed. Spindle power is not given in the listed data. The speedMASTER spindles carry a 36-month warranty without hour limit.

02 How heavy a part can the DMU 95 monoBLOCK carry?

Up to 1,000 kg (2,204.6 lb), including the fixture. The workpiece can be up to 1,040 mm (40.9 in) in diameter and 590 mm (23.2 in) in height. Because the diameter is generous for the weight, add up the mass of solid steel parts before assuming that a part which fits the envelope is within the limit.

03 How many tools does the DMU 95 monoBLOCK hold?

60 pockets as standard. Machine-integrated tool magazines with up to 240 pockets are available. The intermediate sizes are not named in the listed data, so ask which steps exist between 60 and 240 pockets when configuring the machine.

04 Can the DMU 95 monoBLOCK do turning?

The listed data does not show it. DMG MORI describes the process integration on this model as 5-axis milling, gear cutting and in-process measuring, and gives no turning speed or turning workpiece limit. A buyer who needs turning on the same machine should raise it with DMG MORI before choosing this model.

05 How do the travels compare with the DMU 85 monoBLOCK and the DMU 100 P duoBLOCK?

The DMU 85 monoBLOCK has 935 mm (36.8 in) of X with the same 850 mm (33.5 in) of Y and 650 mm (25.6 in) of Z as the DMU 95 monoBLOCK, which has 950 mm (37.4 in) of X. The DMU 100 P duoBLOCK is larger in every axis: 1,000 mm (39.4 in) in X, 1,250 mm (49.2 in) in Y and 1,000 mm (39.4 in) in Z.