Dener TTH-10(C)
Key Specifications
Max Spindle
Spindle Power
Max Turn Length
rapid traverse xz
cutting feed rate xz
swing diameter
How much does the Dener TTH-10(C) cost?
Price estimate
We do not have a price for the Dener TTH-10(C) that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Dener prints the TTH-10(C) beside the TTH-10 with a maximum turning diameter of 438 mm (17.2 in) and a machining length of 607 mm (23.9 in). Those are the two rows in which it departs from the base model.
The TTH-10 lists 528 mm (20.8 in) and 660 mm (26 in). The reduction in diameter is the same as between the two TTH-8 columns, and the page is equally silent about what the (C) configuration consists of.
What stays is the big through-hole. The spindle bore is 92 mm (3.6 in) and the bar capacity 75 mm (3 in), behind a 10 inch (254 mm) chuck. For a shop whose work is mostly bar and tube, the lower turning diameter may cost nothing: 75 mm stock sits far inside a 438 mm limit.
Spindle speed is 3,500 rpm. The motor power row reads 11/16.5 kW. Swing is 650 mm (25.6 in), rapid traverse 30/30 m/min, cutting feed rate 1~10 m/min.
Dener describes the lathes as built on a one-piece rigid cast frame with a 45° slant. Its standard list for the series covers the turret, a fully enclosed cabin, a chip conveyor and an automatic fill-and-drain lubrication system, and its option list includes an automatic bar feeder unit and a chip cart.
Full Specifications
| Parameter | Value |
|---|---|
| Rapid Traverse Xz | 30/30 m/min |
| Cutting Feed Rate Xz | 1~10 m/min |
| Swing Diameter | 650 mm (25.6 in) |
| Max Turning Diameter | 438 mm (17.2 in) |
| Max Turning Length | 607 mm (23.9 in) |
| Chuck Size | 10 inch (254 mm) |
| Max Spindle Speed | 3,500 rpm |
| Spindle Motor Power | 11/16.5 kW |
| Spindle Bore | 92 mm (3.6 in) |
| Bar Capacity | 75 mm (3 in) |
Specifications sourced from en.dener.com — verified 2026-10-05
Strengths & Limitations
Strengths
- 92 mm (3.6 in) bore and 75 mm (3 in) bar capacity carried over from the TTH-10
- 10 inch (254 mm) chuck at 3,500 rpm
- Machining length of 607 mm (23.9 in)
- Automatic fill-and-drain lubrication system is standard equipment
Limitations
- Turning diameter of 438 mm (17.2 in), down from 528 mm (20.8 in) on the TTH-10
- Spindle motor power printed as 11/16.5 kW
- No explanation of the (C) column on Dener's page
- Bar feeder and chip cart are optional equipment
Best For
Frequently Asked Questions
01
Maximum turning diameter is 438 mm (17.2 in) and machining length 607 mm (23.9 in), under a swing diameter of 650 mm (25.6 in). The TTH-10 lists 528 mm (20.8 in) and 660 mm (26 in).
02
No. The TTH-10(C) keeps the 92 mm (3.6 in) spindle bore and the 75 mm (3 in) bar capacity. Chuck diameter, spindle speed and motor power are also unchanged.
03
The product page gives no definition. It should be clarified with the supplier, together with the reason the turning diameter and machining length are lower than in the base column.
04
The standard equipment list names FANUC 0İ TFP for the series, and the optional list names Mitsubishi M80A-8A. Neither list distinguishes the TTH-10(C) from the other models.
More from Dener
Other CNC Lathes / Turning Centers
Johnford ST-100B
Milltronics SL10-II
Mazak SLANT TURN 500M
Gurutzpe GL 16
DN Solutions PUMA 4100 MA
