Citizen A32

Est. $165,000 - $245,000 Possible older model Updated 2026-10-03

This model was not found in Citizen Machinery's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

Rapid Traverse

32 m/min

max bar capacity

32 mm (1.26 in)

max machining diameter

32 mm (1.26 in)

max machining length

200 mm (7.87 in)

main spindle speed

8,000 RPM

main spindle power

3.7 / 5.5 kW (5 / 7.4 HP)

How much does the Citizen A32 cost?

Estimated price range

Est.$165,000 - $245,000

Our best estimate for a swiss-type lathe in this class — not a quote from Citizen Machinery. Configuration moves it a long way.

Overview

The Citizen A32 is a 7-axis sliding-headstock (Swiss-type) automatic lathe for bar up to 32 mm (1.26 in), with a 38 mm (1.50 in) spindle bore, a back spindle and 38 tools. It is not in Citizen's current lineup, so the machine will be bought used, and the listed figures below should be confirmed on the machine itself.

Its spindle speeds are the reverse of what many expect. The main spindle is listed at 8,000 rpm on a 3.7 / 5.5 kW (5 / 7.4 HP) motor, while the back spindle reaches 10,000 rpm on 1.5 / 2.2 kW (2 / 3 HP). At 32 mm the main spindle has the power for full-diameter turning, but small diameters turned on it will run below their ideal cutting speed, so fine features may be better placed on the back end.

The guide bushing is standard and guide-bushless running is an option, which matters for short parts and bar that is not ground to guide-bush tolerance. Machining length is listed at 200 mm (7.87 in) and rapid traverse at 32 m/min. Whether LFV chip breaking is fitted depends on how the machine was configured, so check before counting on it for stringy materials.

The control is a FANUC 32i-B with Citizen software. The machine measures 2,300 x 1,580 x 1,780 mm (90.6 x 62.2 x 70.1 in), weighs 2,550 kg (5,621 lbs) and is rated at 8.0 kVA. The listed figures for the Cincom A32-VII give 12,000 RPM on the main spindle and 40 tools, so check which generation a machine on offer actually is.

Full Specifications

Parameter	Value
Max Bar Capacity	32 mm (1.26 in)
Max Machining Diameter	32 mm (1.26 in)
Max Machining Length	200 mm (7.87 in)
Main Spindle Speed	8,000 RPM
Main Spindle Power	3.7 / 5.5 kW (5 / 7.4 HP)
Back Spindle Speed	10,000 RPM
Back Spindle Power	1.5 / 2.2 kW (2 / 3 HP)
Spindle Bore	38 mm (1.50 in)
Number of Axes	7-axis
Number of Tools	38
Lfv Chip Breaking	Configuration dependent (confirm at order)
Guide Bushing	Yes / Guide-bushless option
Rapid Traverse Rate	32 m/min
Power Consumption	8.0 kVA rated
Machine Dimensions	2,300 x 1,580 x 1,780 mm (90.6 x 62.2 x 70.1 in)
Machine Weight	2,550 kg (5,621 lbs)
CNC Control	FANUC 32i-B (Citizen software)

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

32 mm (1.26 in) bar capacity through a 38 mm (1.50 in) spindle bore
38 tool positions, against 21 on the Cincom A20
Guide-bush machining with a guide-bushless option for short parts
Back spindle to 10,000 rpm with a 1.5 / 2.2 kW (2 / 3 HP) motor
32 m/min rapid traverse and a FANUC 32i-B control with Citizen software

Limitations

Not in Citizen's current lineup; the listed figures need confirming on the machine
Main spindle tops out at 8,000 rpm, below the Cincom A20's Max. 10,000 rpm
LFV chip breaking depends on configuration, so a given machine may not have it
Guide-bushless running is an option, not standard

Best For

Swiss-type parts from bar up to 32 mm Long slender parts machined through a guide bushing Parts that need many tools in one cycle

Frequently Asked Questions

01 What bar size does the Citizen A32 take?

Bar up to 32 mm (1.26 in), through a 38 mm (1.50 in) spindle bore. The listed machining length is 200 mm (7.87 in). The guide bushing is standard and a guide-bushless mode is an option.

02 Does the A32 have LFV chip breaking?

The listed figures say LFV depends on configuration and should be confirmed at order. On a used machine, check whether it was supplied with LFV before planning jobs in materials that make long, stringy chips.

03 How does the A32 compare with the Cincom A20?

The Cincom A20 is listed with a 26 mm (1.02 in) spindle bore, 21 tools, a 2.2 / 3.7 kW spindle at Max. 10,000 rpm and 4,851 lb (2,200 kg). The A32 has a 38 mm bore, 38 tools, 3.7 / 5.5 kW at 8,000 rpm and weighs 2,550 kg.

04 What space and power does the A32 need?

The listed dimensions are 2,300 x 1,580 x 1,780 mm (90.6 x 62.2 x 70.1 in) and the weight 2,550 kg (5,621 lbs). The rated power consumption is 8.0 kVA. Add room for the bar feeder behind the headstock.