AXYZ 6010 CNC Router
This model was not found in AXYZ International's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Table Size
Rapid Traverse
Spindle Power
x y z travel
spindle speed
atc
How much does the AXYZ 6010 CNC Router cost?
Estimated price range
Our best estimate for a cnc router in this class — not a quote from AXYZ International. Configuration moves it a long way.
Overview
The AXYZ 6010 CNC Router is a 5x10 ft (1524x3048 mm) flatbed router with travels of 120 x 60 x 8 in (3048 x 1524 x 203 mm). It is not in AXYZ's current lineup and appears to be an older model, so the listed figures are unverified against the maker.
Travel in X and Y equals the table size, so a full 5 x 10 ft sheet can be cut edge to edge. The spindle is a 7.5 kW (10 HP) HSD electrospindle running up to 24,000 RPM, sized for wood-based panels, plastics and non-ferrous sheet. AC servo drives on all axes move the gantry at up to 2,000 in/min (50 m/min) in rapid, and Z travel is 8 in (203 mm).
The 24-position carousel tool changer is listed as optional. A given machine may therefore change tools by hand, which matters for nests that use several cutters, so check before assuming unattended running. Hold-down is a multi-zone vacuum table and the control is the AXYZ controller, Windows-based and G-code compatible. The listing gives no accuracy or weight figure.
Full Specifications
| Parameter | Value |
|---|---|
| Table Size | 5x10 ft (1524x3048 mm) |
| X Y Z Travel | 120 x 60 x 8 in (3048 x 1524 x 203 mm) |
| Spindle Motor Power | 7.5 kW (10 HP) HSD electrospindle |
| Spindle Speed | Up to 24,000 RPM |
| Rapid Traverse Rate | Up to 2,000 in/min (50 m/min) |
| ATC | 24-position carousel (optional) |
| Vacuum Table | Multi-zone vacuum hold-down |
| CNC Control | AXYZ controller (Windows-based, G-code compatible) |
| Servo Drives | AC servo on all axes |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Travels of 120 x 60 x 8 in (3048 x 1524 x 203 mm) cover a full 5 x 10 ft sheet
- 7.5 kW (10 HP) HSD electrospindle at up to 24,000 RPM
- AC servo drives on all axes with rapids up to 2,000 in/min (50 m/min)
- Multi-zone vacuum hold-down
Limitations
- The 24-position carousel tool changer is optional, not standard
- Z travel of 8 in (203 mm) limits material thickness and tool length
- No accuracy or machine weight is listed
Best For
Frequently Asked Questions
01
The table is 5x10 ft (1524x3048 mm) and the listed travels are 120 x 60 x 8 in (3048 x 1524 x 203 mm), so a full sheet of that size is within reach in X and Y.
02
Only as an option. The listed figures show a 24-position carousel marked optional, so some machines were supplied without one. Confirm whether it is fitted before planning multi-tool jobs.
03
A 7.5 kW (10 HP) HSD electrospindle running up to 24,000 RPM, with AC servo drives on all axes and rapid traverse up to 2,000 in/min (50 m/min).
Videos
Jim Unsworth
Lee Callanan
Jim Unsworth
Community Discussions
Troubleshooting and problem-solving
Links to community discussions. Summaries are editorial — visit the original thread for full context.
