Yawei PBM-110/4100
Key Specifications
bending force
table length
distance between columns
throat depth
ram stroke
die setting height
How much does the Yawei PBM-110/4100 cost?
Price estimate
We do not have a price for the Yawei PBM-110/4100 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
Long bends in thin sheet are the job of the Yawei PBM-110/4100. It combines the lowest force in the PBM series, 1,100 kN, with the longest table, 4,100 mm (161.4 in), and it is the quickest of the long machines.
Speed is the reason to look at it. The listed slider speeds are 250 mm/s; 20 mm/s; 220 mm/s. The first and second figures are the highest on Yawei's PBM page, and the PBM-220/4100 lists 220 mm/s and 15 mm/s in the same two positions. On light-gauge panels with many bends, the time spent travelling to the sheet and pressing is most of the cycle, so those figures matter more than tonnage.
The drive is small to match: 5.5 x 2 kW. PBM machines use an oil-electric hybrid system with pump-controlled synchronisation, which Yawei presents as its energy-saving design.
Nothing is given up in the working space. Column spacing is 3,600 mm (141.7 in), the throat opening is 410 mm (16.1 in), the stroke is 265 mm (10.4 in) and the mould height is 600 mm (23.6 in), all equal to the largest model. The machine weighs 9,700 kg (21,384 lb) and measures 4,610 x 1,550 x 2,985 mm (181.5 x 61.0 x 117.5 in). One caution: a long, lightly loaded brake depends on its crowning to keep the angle constant along the bend, and the page says nothing about crowning on this series.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 1,100 kN |
| Table Length | 4,100 mm (161.4 in) |
| Distance Between Columns | 3,600 mm (141.7 in) |
| Throat Depth | 410 mm (16.1 in) |
| Ram Stroke | 265 mm (10.4 in) |
| Die Setting Height | 600 mm (23.6 in) |
| Ram Speed | 250 mm/s; 20 mm/s; 220 mm/s |
| Main Motor Power | 5.5 x 2 kW |
| Machine Dimensions | 4,610 x 1,550 x 2,985 mm (181.5 x 61.0 x 117.5 in) |
| Machine Weight | 9,700 kg (21,384 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- Fastest listed slider speeds of the 4,100 mm PBM models: 250 mm/s; 20 mm/s; 220 mm/s
- 4,100 mm (161.4 in) table with 3,600 mm (141.7 in) between columns
- Smallest drive in the series at 5.5 x 2 kW
- Lightest of the long-bed PBM machines at 9,700 kg (21,384 lb)
Limitations
- 1,100 kN is the lowest nominal force in the series, which rules out thick plate over long bends
- Crowning is not described, and it matters most on a long bed with light loads
- Still 4,610 x 1,550 x 2,985 mm overall, so the floor space of a four-metre brake is needed
- Weighs 9,700 kg (21,384 lb) against 9,000 kg (19,841 lb) for the short-bed PBM-110/3100, and needs a metre more floor length
Best For
Frequently Asked Questions
01
It is the long, light model of the PBM series: 1,100 kN of nominal force over 4,100 mm (161.4 in) of table. Yawei describes the series as suitable for high-precision and efficient bending of various workpieces.
02
Slider speeds are listed as 250 mm/s; 20 mm/s; 220 mm/s, unlabelled. Taken as approach, working and return, the first two are the highest values in the PBM series; the PBM-220/4100 lists 220 mm/s and 15 mm/s there.
03
No. Slider stroke is 265 mm (10.4 in) and mould height is 600 mm (23.6 in), with a throat opening of 410 mm (16.1 in). Those three figures are identical across all PBM models.
04
Yawei lists 5.5 x 2 kW, the lowest in the series. The machine weighs 9,700 kg (21,384 lb) and its overall dimensions are 4,610 x 1,550 x 2,985 mm (181.5 x 61.0 x 117.5 in).
