Yawei PBH(A)-400/6200
Key Specifications
bending force
table length
distance between columns
throat depth
ram stroke
max opening height
How much does the Yawei PBH(A)-400/6200 cost?
Price estimate
We do not have a price for the Yawei PBH(A)-400/6200 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The longest of the 4,000 kN models, the Yawei PBH(A)-400/6200 has a 6,200 mm (244.1 in) table and 5,100 mm (200.8 in) between its columns. Nominal force is 4,000 kN.
A six-metre bed at this rating is a different proposition from the PBH(A)-300/6200. The throat is 510 mm (20.1 in) rather than 410 mm (16.1 in) on the PBH(A)-300/6200, and the slider travels 315 mm (12.4 in) below an opening of 520 mm (20.5 in). Long parts that overhang the columns can therefore carry a deeper flange behind the bend line.
The drive is unchanged from the shorter 4,000 kN machines: 30 kW (40.2 hp), 1,050 L of oil, slider speeds of 110 mm/s; 8.5 mm/s; 100 mm/s. The structure is not. Yawei prints a weight of 43,000 / 37,000 kg (94,797 / 81,570 lb) and overall dimensions of 6,500 x 2,160 x 3,910 mm (255.9 x 85.0 x 153.9 in), so the building has to offer close to four metres of height before any lifting gear is counted.
Work for this size comes from the sectors the maker lists for the series, engineering machinery and railway first among them. Think of long side members, tipper body panels and tank shells in medium plate.
Yawei states that the frames are made of steel plate and machined on a large five-sided machining center. On a bed this long the worktable crowning system and the throat deformation compensation do much of the work of holding one angle from end to end.
Full Specifications
| Parameter | Value |
|---|---|
| Bending Force | 4,000 kN |
| Table Length | 6,200 mm (244.1 in) |
| Distance Between Columns | 5,100 mm (200.8 in) |
| Throat Depth | 510 mm (20.1 in) |
| Ram Stroke | 315 mm (12.4 in) |
| Max Opening Height | 520 mm (20.5 in) |
| Ram Speed | 110 mm/s; 8.5 mm/s; 100 mm/s |
| Main Motor Power | 30 kW (40.2 hp) |
| Oil Tank Volume | 1,050 L |
| Machine Dimensions | 6,500 x 2,160 x 3,910 mm (255.9 x 85.0 x 153.9 in) |
| Machine Weight | 43,000 / 37,000 kg (94,797 / 81,570 lb) |
Specifications sourced from en.yawei.cc — verified 2026-10-05
Strengths & Limitations
Strengths
- 4,000 kN across a 6,200 mm (244.1 in) table
- 510 mm (20.1 in) throat for parts overhanging the columns
- 5,100 mm (200.8 in) between the columns
- Motor and slider speeds equal to the shorter 4,000 kN models
- Steel plate frame machined on a five-sided machining center
Limitations
- Heaviest and tallest of the three 4,000 kN machines
- Force per metre is lower than on the PBH(A)-400/4100
- Pressing speed of 8.5 mm/s on long strokes
- Weight given as two figures with no explanation
Best For
Frequently Asked Questions
01
It applies 4,000 kN over a table length of 6,200 mm (244.1 in). Column spacing is 5,100 mm (200.8 in), throat opening 510 mm (20.1 in), slider stroke 315 mm (12.4 in) and maximum opening height 520 mm (20.5 in).
02
The PBH(A)-500/6200 has 5,000 kN and a 37 kW (49.6 hp) motor on a table of equal length, with equal throat, stroke and opening height. This model has 4,000 kN and 30 kW (40.2 hp).
03
Yawei prints 43,000 / 37,000 kg (94,797 / 81,570 lb) in the total weight row. The page does not say which configuration each figure belongs to, so the transport weight should be confirmed in writing.
04
Length, width and height are given as 6,500 x 2,160 x 3,910 mm (255.9 x 85.0 x 153.9 in). The oil tank holds 1,050 L and the main motor is rated 30 kW (40.2 hp).
