WARDJet X-5 5-Axis Waterjet Cutting System
This model was not found in WARDJet's current lineup when we checked on 2026-10-06 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Accuracy
table options
tilt head
pump options
positioning speed
abrasive system
How much does the WARDJet X-5 5-Axis Waterjet Cutting System cost?
Estimated price range
Our best estimate for a cnc waterjet cutting in this class — not a quote from WARDJet. Configuration moves it a long way.
Overview
The WARDJet X-5 is a 5-axis waterjet with a tilting head listed at ±60 degrees, offered on tables from 4x4 ft to 10x20 ft. WARDJet does not list an X-5 among its present models, and the listed figures are few, so use them as a starting point for inspecting a real machine.
A ±60 degree tilt covers bevels and chamfered edges on plate. It does not reach the horizontal, so side cutting on formed parts is outside its range. The control is listed as WARDJet IntelliCAM with 5-axis kinematics.
Pump options are given as 60K or 90K PSI, and which one is fitted changes cutting speed considerably. Rapid positioning is up to 35 m/min and positioning accuracy is ±0.05 mm, on a US-built steel welded gantry. Abrasive is delivered by precision abrasive metering. Auto-fill is optional, so do not assume it is present.
Full Specifications
| Parameter | Value |
|---|---|
| Table Options | 4x4 ft to 10x20 ft |
| Tilt Head | A-Jet 5-axis (±60 degrees) |
| Pump Options | KMT or Hypertherm 60K or 90K PSI |
| Positioning Speed | Up to 35 m/min (rapid) |
| Positioning Accuracy | ±0.05 mm |
| Abrasive System | Precision abrasive metering (optional auto-fill) |
| CNC Control | WARDJet IntelliCAM with 5-axis kinematics |
| Construction | US-built steel welded gantry |
| Max Cutting Height | Unlimited (adjustable Z with gantry clearance) |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 5-axis tilt head listed at ±60 degrees for bevelled and chamfered edges
- Table options from 4x4 ft to 10x20 ft
- Rapid positioning up to 35 m/min with ±0.05 mm positioning accuracy
- Pump options of 60K or 90K PSI
Limitations
- Tilt stops at ±60 degrees, short of the horizontal reach needed for side cuts on formed parts
- Auto-fill for the abrasive system is optional, not standard
- No cutting thickness or pump power is listed
Best For
Frequently Asked Questions
01
The tilt head is listed as 5-axis with a range of ±60 degrees. That is enough for bevels and chamfers on flat material, and the control is listed with 5-axis kinematics to drive it.
02
Table options run from 4x4 ft to 10x20 ft, and pump options are 60K or 90K PSI. Both vary from machine to machine, so establish the table size and the pump of the specific unit before comparing it with anything else.
03
Only if the option was ordered. The abrasive system is listed as precision abrasive metering with optional auto-fill, so a machine without that option is topped up by hand.
More from WARDJet
Other CNC Waterjet Cutting
Flow International Mach 500 5-Axis Waterjet
Flow Mach 200s
Flow HyperJet 94i
