Tsugami M08JL5-II

$100,000 - $150,000 Updated 2026-03-19

Key Specifications

max machining diameter chuck

280 mm (11.02 in)

max machining diameter bar

65 mm (2.56 in)

max machining length

500 mm (19.69 in)

main spindle speed

200 - 4,000 RPM

main spindle motor

9/11 kW (12/14.8 HP)

tool stations

8-station turret

Overview

The Tsugami M08JL5-II is a long-stroke variant of Tsugami's precision turret lathe lineup, built for shops that need to turn longer workpieces without sacrificing the accuracy and rigidity the M-series is known for. With 500 mm (19.69 in) of machining length and 280 mm (11.02 in) chuck capacity, it fills the gap between compact turret lathes and full-sized CNC lathes.

The machine's 9/11 kW (12/14.8 HP) main spindle runs 200-4,000 RPM and handles 65 mm (2.56 in) bar stock, identical to the standard M08J-II. Where it differs is the extended Z-axis travel that accommodates longer shafts, sleeves, and cylindrical components. The 8-station turret provides reliable tool indexing for production cycles, and rapid traverse rates of 24 m/min on X and 27 m/min on Z keep non-cutting time under control even with the longer travel distances.

At 3,430 kg, the M08JL5-II is slightly heavier than its shorter sibling, and the footprint grows to 1,970 x 1,778 x 1,600 mm to accommodate the longer bed. That's still a reasonably compact machine for the turning length it offers. Tsugami's box-way construction on the X-axis provides the rigidity needed for consistent surface finishes on long parts where tool pressure can cause chatter on lesser machines.

This is the machine you want when your parts are too long for a standard turret lathe but you don't need the complexity and cost of a full-size production lathe. Shaft manufacturers, hydraulic cylinder producers, and shops making long sleeves and bushings will find the M08JL5-II hits a productive sweet spot.

Full Specifications

Parameter	Value
Max Machining Diameter Chuck	280 mm (11.02 in)
Max Machining Diameter Bar	65 mm (2.56 in)
Max Machining Length	500 mm (19.69 in)
Main Spindle Speed	200 - 4,000 RPM
Main Spindle Motor	9/11 kW (12/14.8 HP)
Tool Stations	8-station turret
Rapid Traverse X	24 m/min (945 IPM)
Rapid Traverse Z	27 m/min (1,063 IPM)
CNC Control	Fanuc
Machine Dimensions	1,970 x 1,778 x 1,600 mm
Machine Weight	3,430 kg (7,562 lb)

Specifications sourced from tsugami.co.jp — verified 2026-03-28

Strengths & Limitations

Strengths

500 mm machining length accommodates longer shafts, sleeves, and cylindrical parts that won't fit on standard turret lathes
9/11 kW spindle motor provides solid torque for turning steel and stainless at production rates
Compact footprint relative to the turning length it offers saves valuable floor space
Box-way X-axis construction provides rigidity to prevent chatter on long, slender workpieces
Same proven 8-station turret and Fanuc control as the rest of the M-series for operator familiarity
3,430 kg machine weight gives good vibration damping for a mid-sized turret lathe

Limitations

No live tooling capability limits the machine to pure turning operations
8 tool stations can be restrictive for parts requiring many different tools
4,000 RPM max spindle speed may limit productivity on small-diameter aluminum parts
No sub-spindle for back-working, requiring secondary operations for two-sided parts

Best For

Shaft manufacturers producing drive shafts, spindles, and axles up to 500 mm in length Hydraulic and pneumatic component shops turning cylinder tubes, pistons, and valve spools Automotive suppliers machining longer steering and suspension components Job shops needing a versatile long-bed lathe that doesn't take up excessive floor space Production environments turning long sleeves, bushings, and tubular components

Frequently Asked Questions

01 What's the difference between the M08JL5-II and M08JL8-II?

Both handle 280 mm chuck work and 65 mm bar stock, but the M08JL8-II has an even longer bed for extended machining length beyond the M08JL5-II's 500 mm. The M08JL8-II weighs more at 4,000 kg and has a larger footprint. Choose the M08JL5-II if 500 mm of turning length covers your parts, and the M08JL8-II for anything longer.

02 Can the M08JL5-II use a bar feeder?

Yes, the M08JL5-II supports bar feeding for automated production from 65 mm bar stock. Pair it with a bar feeder like the LNS or IEMCA units for lights-out turning of longer shaft-type components. The longer bed means you can produce longer parts from bar without cutting blanks first.

03 How does the M08JL5-II compare to a standard M08J-II?

The M08JL5-II offers 500 mm of machining length versus the standard M08J-II's shorter capability. Same spindle specs, same 8-station turret, same 65 mm bar capacity. The M08JL5-II is slightly larger and 130 kg heavier. If your parts don't exceed the M08J-II's turning length, stick with the standard model to save floor space and cost.

04 What tolerances can the M08JL5-II hold on long parts?

The M08JL5-II holds ±0.005 mm (±0.0002 in) on diameter with proper setup. On longer parts, you may want to use a tailstock or steady rest for support. Tsugami's thermal stability design helps maintain these tolerances even on extended production runs. Surface finishes of Ra 1.6 micrometers or better are typical on steel.