TOS Varnsdorf W 100 A
This model was not found in TOS Varnsdorf's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
X Travel
Y Travel
Z Travel
Spindle Taper
Table Size
Rapid Traverse
How much does the TOS Varnsdorf W 100 A cost?
Estimated price range
Our best estimate for a cnc boring machine in this class — not a quote from TOS Varnsdorf. Configuration moves it a long way.
Overview
The TOS Varnsdorf W 100 A is a table-type horizontal boring mill with a 100 mm (3.94 in) spindle, 1,600 mm (63 in) of table travel in X and a table load capacity of 6,300 kg (13,889 lb). TOS Varnsdorf's current pages do not show this model. The listed figures have not been checked against the maker, and they fall into two sets that disagree on several rows.
Where the two sets agree, the picture is clear. The spindle is 100 mm (3.94 in) in one set and 4 in according to the other, X travel is 63 in for both, and the table is 49.2 in wide for both. Positioning accuracy is listed at ±0.008 mm, repeatability at ±0.004 mm and B-axis resolution at 0.001 degrees.
The disagreements matter more. Spindle power is 22 kW (29.5 hp) in one row and 15 hp in another. Speed is a range of 10 - 2,500 RPM against a single figure of 1,120 RPM. Vertical travel of the head is 1,400 mm (55.1 in) against 44 in, and the table measures 1,250 mm × 1,100 mm (49.2 in × 43.3 in) against 49.2 in square. The spindle stroke is the widest gap: a 500 mm (19.7 in) quill stroke against 35.43 in of spindle travel.
The same caution applies to the control row, Siemens Sinumerik 840D sl with Fanuc 30i-B optional, and to the rapid traverse of 6 m/min in X, Y and Z and 4 m/min in W, which belong to one set only. Before buying, read the motor plate, measure the travels and note the control actually fitted.
Full Specifications
| Parameter | Value |
|---|---|
| Spindle Diameter | 100 mm (3.94 in) |
| Spindle Speed Range | 10 - 2,500 RPM |
| Spindle Motor Power | 22 kW (29.5 hp) |
| Spindle Taper | ISO 50 / SK50 |
| Table Size | 1,250 mm × 1,100 mm (49.2 in × 43.3 in) |
| Table Load Capacity | 6,300 kg (13,889 lb) |
| X-Axis Travel | 1,600 mm (63 in) |
| Y-Axis Travel | 1,400 mm (55.1 in) |
| Z-Axis Travel | 800 mm (31.5 in) |
| Quill Stroke W | 500 mm (19.7 in) |
| B Axis Resolution | 0.001 degrees |
| Positioning Accuracy | ±0.008 mm |
| Repeatability | ±0.004 mm |
| Rapid Traverse Rate | 6 m/min X, Y, Z; 4 m/min W |
| CNC Control | Siemens Sinumerik 840D sl (Fanuc 30i-B optional) |
| Spindle Size | 4" |
| X Horiz Tvl of Table | 63" |
| Y Vert Tvl of Head | 44" |
| Power | 15 hp |
| RPM | 1,120 RPM |
| Table W | 49.2" |
| Table L | 49.2" |
| Spindle Tvl | 35.43" |
Specifications sourced from machinetools.com — verified 2026-03-28
Strengths & Limitations
Strengths
- Table load capacity listed at 6,300 kg (13,889 lb) on a 1,250 mm × 1,100 mm (49.2 in × 43.3 in) table
- X travel of 1,600 mm (63 in), the one travel on which both sets of rows agree
- 100 mm (3.94 in) spindle with an ISO 50 / SK50 taper
- Listed positioning accuracy of ±0.008 mm and repeatability of ±0.004 mm
Limitations
- Spindle power is listed as 22 kW (29.5 hp) in one row and 15 hp in another
- Top spindle speed is 2,500 RPM in one row and 1,120 RPM in another
- Vertical travel is 1,400 mm (55.1 in) or 44 in depending on the row, and spindle travel 500 mm (19.7 in) or 35.43 in
- Rapid traverse is at most 6 m/min in X, Y and Z and 4 m/min in W
Best For
Frequently Asked Questions
01
The listed figures disagree. One row gives 22 kW (29.5 hp) with a speed range of 10 - 2,500 RPM. Another gives 15 hp and 1,120 RPM. Read the spindle motor plate on the machine to find out which applies.
02
X is 1,600 mm (63 in), and both sets of rows agree on it. Y is 1,400 mm (55.1 in) in one row and 44 in according to another. Z is 800 mm (31.5 in). The spindle stroke W is 500 mm (19.7 in) in one row, while another row gives 35.43 in of spindle travel.
03
1,250 mm × 1,100 mm (49.2 in × 43.3 in) with a load capacity of 6,300 kg (13,889 lb) according to one set of rows. The other set gives 49.2 in for both width and length. B-axis resolution is listed at 0.001 degrees.
04
The control row reads Siemens Sinumerik 840D sl with Fanuc 30i-B optional. That row belongs to the same set as the 22 kW (29.5 hp) spindle, and the other set names no control at all, so check what is on the machine before planning programs around it.
Videos
Rise Tek Machinery
Surplex
Community Discussions
Electrical and installation requirements
Troubleshooting and problem-solving
Owner experience and review
Links to community discussions. Summaries are editorial — visit the original thread for full context.
More from TOS Varnsdorf
Other CNC Boring Machines
Juaristi MD Series CNC Boring Mill
HNK HKDB-130F(1.1Mx16M)
Mitsui Seiki J6CN
Vision Wide VBT-130-1822
Toshiba BTD-200QH
