Murata Wiedemann Motorum 3048
Key Specifications
punching force
max sheet thickness mild steel
max sheet size without repositioning
max sheet size with one reposition
simultaneous axis speed
turret stations wiedemann style
How much does the Murata Wiedemann Motorum 3048 cost?
Estimated price range
Our best estimate for a cnc punch presse in this class — not a quote from Murata Wiedemann. Configuration moves it a long way.
Overview
With 300 kN (30.6 Metric Tons) on the ram, the Murata Wiedemann Motorum 3048 is the higher-force version of the Motorum 2048: the same 1,250 mm x 2,500 mm sheet without repositioning, the same 125 m / min, and 50% more punching force than the 200 kN (20.5 Metric Tons) of its sibling.
What that force does not change is the thickness limit. Murata Wiedemann gives 6.35 mm as the maximum in mild steel for this model, which is the figure listed for the Motorum 2048 too. The additional tonnage is useful in other ways: a longer cut perimeter per hit at a given thickness, larger tools, and stronger materials than mild steel, where the shear load on the same hole is higher.
Tooling comes in two families. Buyers with Wiedemann-style tools pick between a 44-station turret carrying 4 A / I (auto-index) stations and a 54-station turret carrying 2 A / I. The spring-style turret has 46 stations, 4 A / I among them. Turret style determines which tooling a shop can carry over from its existing presses, so settle it before anything else.
Long work is handled by repositioning: one reposition takes the sheet size to 1,250 mm x 5,000 mm. The published figures end there. Hit rate, tool diameters, machine weight and power supply are not in the table and should be requested from Murata Wiedemann.
Full Specifications
| Parameter | Value |
|---|---|
| Punching Force | 300 kN (30.6 Metric Tons) |
| Max Sheet Thickness Mild Steel | 6.35 mm |
| Max Sheet Size Without Repositioning | 1,250 mm x 2,500 mm |
| Max Sheet Size with One Reposition | 1,250 mm x 5,000 mm |
| Simultaneous Axis Speed | 125 m / min |
| Turret Stations Wiedemann Style | 44 (4 A / I) / 54 (2 A / I) |
| Turret Stations Spring Style | 46 (4 A / I) |
Specifications sourced from muratec-usa.com — verified 2026-10-03
Strengths & Limitations
Strengths
- 300 kN (30.6 Metric Tons) of punching force, 50% more than the Motorum 2048
- Processes 1,250 mm x 2,500 mm sheets in one clamping and 1,250 mm x 5,000 mm with one reposition
- Turret available with 44, 54 or 46 stations depending on tooling style
- 125 m / min simultaneous axis speed
Limitations
- Despite the higher force, maximum mild steel thickness stays at 6.35 mm
- Choosing 54 stations in Wiedemann style leaves 2 A / I stations instead of 4 A / I
- No hit rate, tool size or machine weight appears in the published table
Best For
Frequently Asked Questions
01
Force. The Motorum 3048 is rated at 300 kN (30.6 Metric Tons) and the Motorum 2048 at 200 kN (20.5 Metric Tons). Sheet sizes, axis speed and turret options are listed identically for both, so the decision rests on whether your tooling and materials need the higher tonnage.
02
Not according to the published figure for mild steel, which is 6.35 mm. The 300 kN (30.6 Metric Tons) of force is there for larger tools and stronger materials at that thickness and below. Ask Murata Wiedemann for the limits in stainless steel and aluminium, which the table does not give.
03
Three are listed. Wiedemann style: 44 stations with 4 A / I, or 54 stations with 2 A / I. Spring style: 46 stations with 4 A / I. A / I means auto-index, so the 54-station turret gives the most tools and the fewest rotating stations.
Videos
MurataForming
MurataForming
Polteknik
Polteknik
More from Murata Wiedemann
Other CNC Punch Presses
Yawei HPC-2044
