Leadwell V-30i
Key Specifications
X Travel
Y Travel
Z Travel
Max Spindle
Spindle Taper
Tool Capacity
How much does the Leadwell V-30i cost?
Estimated price range
Our best estimate for a vertical machining centers (vmc) in this class — not a quote from Leadwell. Configuration moves it a long way.
Overview
The Leadwell V-30i is a vertical machining center with 762 x 510 x 510 mm (30.0 x 20.1 x 20.1 in) of travel, linear roller guideways and a 10,000 RPM BT 40 spindle. Treat the listed figures as unverified, because they have not been checked against a Leadwell page.
Guideways and rapids define this machine. On linear roller guideways the axes move at 36 m/min in X and Y and 30 m/min in Z, and the arm-type changer swaps tools in 2.0 sec tool-to-tool. On parts with many short operations those two figures, more than spindle power, set the cycle time. Positioning accuracy is listed as ±0.005 mm and repeatability as ±0.003 mm.
The table is 900 x 500 mm (35.4 x 19.7 in) and takes 700 kg (1,543 lb). Y travel of 510 mm (20.1 in) is slightly more than the table depth, so the whole depth of the table can be reached. The V-30iT has the same 762 mm (30.0 in) of X but is listed with an 800 x 430 mm (31.5 x 16.9 in) table and a 500 kg (1,102 lb) load, so the V-30i is the roomier of the two for fixtures.
The spindle delivers 15 kW (20 hp); 12,000 RPM is optional and no torque figure is listed. The magazine holds 24 tools, the control is a Fanuc 0i-MF and the machine weighs approx. 6,200 kg (13,669 lb).
Full Specifications
| Parameter | Value |
|---|---|
| X-Axis Travel | 762 mm (30.0 in) |
| Y-Axis Travel | 510 mm (20.1 in) |
| Z-Axis Travel | 510 mm (20.1 in) |
| Max Spindle Speed | 10,000 RPM (12,000 RPM optional) |
| Spindle Taper | BT 40 |
| Spindle Motor Power | 15 kW (20 hp) |
| Table Size | 900 x 500 mm (35.4 x 19.7 in) |
| Max Workpiece Weight | 700 kg (1,543 lb) |
| Tool Capacity | 24 (arm-type ATC) |
| Tool Change Time | 2.0 sec (tool-to-tool) |
| Rapid Traverse Rate | 36 m/min (X/Y); 30 m/min (Z) |
| Guideway Type | Linear roller guideways |
| Positioning Accuracy | ±0.005 mm |
| Repeatability | ±0.003 mm |
| CNC Control | Fanuc 0i-MF |
| Machine Weight | 6,200 kg (13,669 lb) approx. |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Rapid traverse of 36 m/min in X and Y and 30 m/min in Z on linear roller guideways
- Tool change time of 2.0 sec tool-to-tool with a 24-tool arm-type ATC
- Positioning accuracy of ±0.005 mm and repeatability of ±0.003 mm
- 900 x 500 mm (35.4 x 19.7 in) table rated for 700 kg (1,543 lb)
- 510 mm (20.1 in) of Y travel alongside 762 mm (30.0 in) of X
Limitations
- 12,000 RPM is optional; the listed spindle speed is 10,000 RPM
- Spindle power is 15 kW (20 hp) and no torque figure is listed, so roughing ability cannot be judged from the table
- Workpiece weight is limited to 700 kg (1,543 lb)
Best For
Frequently Asked Questions
01
Travels are 762 mm (30.0 in) in X, 510 mm (20.1 in) in Y and 510 mm (20.1 in) in Z. The table measures 900 x 500 mm (35.4 x 19.7 in) and the maximum workpiece weight is 700 kg (1,543 lb). These are the listed figures and have not been verified.
02
Rapid traverse is 36 m/min in X and Y and 30 m/min in Z, on linear roller guideways. The arm-type ATC holds 24 tools and changes in 2.0 sec tool-to-tool. No chip-to-chip time or cutting feed rate is listed.
03
Both have 762 mm (30.0 in) of X travel. The V-30iT is listed with an 800 x 430 mm (31.5 x 16.9 in) table, a 500 kg (1,102 lb) load and a weight of approx. 5,500 kg (12,125 lb). The V-30i has a 900 x 500 mm (35.4 x 19.7 in) table, takes 700 kg (1,543 lb) and weighs approx. 6,200 kg (13,669 lb).
04
A BT 40 spindle with a listed speed of 10,000 RPM and 15 kW (20 hp). A 12,000 RPM version is optional. The table gives no torque figure and does not say how the spindle is driven, so ask for the spindle data sheet if low-speed cutting in steel is planned.
Videos
Rise Tek Machinery
scottmachinerynz
scottmachinerynz
Charter Auctions Ltd
Community Discussions
Owner experience and review
Links to community discussions. Summaries are editorial — visit the original thread for full context.
More from Leadwell
Other Vertical Machining Centers (VMC)
Litz MV-1200A
Hartford SW-216
DN Solutions DNM 6700 L 4TH
Makino F3
Vision Wide MN-4023 / MN-4030
