Jet Edge Mid Rail 5x10 CNC Waterjet
This model was not found in Jet Edge's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Rapid Traverse
Accuracy
cutting area
maximum thickness
pressure
pump options
How much does the Jet Edge Mid Rail 5x10 CNC Waterjet cost?
Estimated price range
Our best estimate for a cnc waterjet cutting in this class — not a quote from Jet Edge. Configuration moves it a long way.
Overview
The Jet Edge Mid Rail 5x10 CNC Waterjet is listed with a standard cutting area of 5x10 ft (1524x3048 mm) and modular expansion beyond it. Jet Edge's current lineup does not include this configuration by name, so it may be an older model, and these are the listed figures, not confirmed ones.
Pressure is the unusual figure: up to 90,000 PSI with an HPT intensifier pump, from a pump range listed as 50 HP to 150 HP in the HPT intensifier series. Higher pressure raises jet velocity, which speeds cutting and trims abrasive use per part, at the cost of harder duty on seals and high-pressure plumbing. Check what pump and pressure a given machine was built with, since the 90,000 PSI figure is an upper limit and not a description of every unit.
Maximum thickness is 150 mm (6 in) on steel. The cutting head is straight, with a ±45° bevel head as an option. Positioning accuracy is ±0.05 mm (±0.002 in) and rapid traverse is up to 10 m/min, on AC servo drives and precision linear rails in a mid-rail gantry. The Mid Rail Gantry that Jet Edge lists today gives rapids of 500–750 IPM, so this table is the slower mover between cuts.
Abrasive is handled by an integrated garnet hopper and flow controller, and the control row lists IGEMS CAD/CAM.
Full Specifications
| Parameter | Value |
|---|---|
| Cutting Area | 5x10 ft (1524x3048 mm) standard; modular expansion available |
| Maximum Thickness | 150 mm (6 in) on steel |
| Pressure | Up to 90,000 PSI with HPT intensifier pump |
| Pump Options | 50 HP to 150 HP HPT intensifier series |
| Positioning Accuracy | ±0.05 mm (±0.002 in) |
| Rapid Traverse Rate | Up to 10 m/min |
| Cutting Head | Straight and ±45° bevel option |
| Drive System | AC servo, precision linear rails (mid-rail gantry) |
| CNC Control | IGEMS CAD/CAM |
| Abrasive System | Integrated garnet hopper and flow controller |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Cutting area of 5x10 ft (1524x3048 mm) as standard, with modular expansion available
- Listed for up to 90,000 PSI with an HPT intensifier pump
- Pump options from 50 HP to 150 HP in the HPT intensifier series
- ±45° bevel head available as an option alongside the straight head
- Integrated garnet hopper and flow controller
Limitations
- The ±45° bevel head is an option, so a given machine may cut straight only
- Rapid traverse is up to 10 m/min, against 500–750 IPM listed for the Mid Rail Gantry
- Maximum thickness of 150 mm (6 in) is stated for steel only, with no figure for other materials
- No Z travel, repeatability or machine weight is listed
Best For
Frequently Asked Questions
01
The listed pressure is up to 90,000 PSI with an HPT intensifier pump. Pump options run from 50 HP to 150 HP in the HPT intensifier series. Nothing in the table says which horsepower reaches which pressure, so read the pump nameplate on a used machine.
02
Maximum thickness is listed as 150 mm (6 in) on steel. No other material is given a figure. Thick cuts are slow on any waterjet, so treat the figure as a capability limit and not a production thickness.
03
Yes, if the option is fitted. The cutting head row lists straight cutting and a ±45° bevel option. A machine with only the straight head cannot bevel, so check which head is installed.
04
The Mid Rail Gantry is listed with the Aquavision iQ control, 12″ (304 mm) of Z travel and 500–750 IPM rapids. The Mid Rail 5x10 is listed with IGEMS CAD/CAM in its control row, rapids up to 10 m/min and ±0.05 mm (±0.002 in) positioning accuracy. No Z travel is given for the Mid Rail 5x10.
More from Jet Edge
Other CNC Waterjet Cutting
Flow Mach 100
WardJet R-2014
