Cincinnati XFORMe 175XFe10
Key Specifications
overall die surface
closed height
stroke length
open height
throat
approach speed
How much does the Cincinnati XFORMe 175XFe10 cost?
Price estimate
We do not have a price for the Cincinnati XFORMe 175XFe10 that we can stand behind, so we show no number. Configuration, options and installation move the final price a long way: a quote is the reliable figure.
Overview
The Cincinnati XFORMe 175XFe10 is the 12 ft (3,658 mm) version of the mid-range hybrid XFORM, and it is the last size in the hybrid table to keep the full 70 ipm (1,778 mm/min) forming speed. Approach and return are both 550 ipm (13,970 mm/min).
Its opening matches the larger hydraulic frames. Stroke length is 16 in (406 mm). The ram closes to 7 in (178 mm) and opens to 23 in (584 mm), and the throat is 18 in (457 mm).
For a buyer the practical question is what comes after it. The XFORMe 230XFe10 has the same bed and opening but forms at 55 ipm (1,397 mm/min). If the work fits this frame, there is a measurable cycle-time reason not to oversize.
Cincinnati describes the XFORMe as sharing the premium construction of the all-hydraulic XFORM while running a quieter drive on a low-capacity fluid system. A 5-axis backgage is on the feature list, and Dynamic Thickness Compensation comes as standard.
Full Specifications
| Parameter | Value |
|---|---|
| Overall Die Surface | 12 ft (3,658 mm) |
| Closed Height | 7 in (178 mm) |
| Stroke Length | 16 in (406 mm) |
| Open Height | 23 in (584 mm) |
| Throat | 18 in (457 mm) |
| Approach Speed | 550 ipm (13,970 mm/min) |
| Forming Speed | 70 ipm (1,778 mm/min) |
| Return Speed | 550 ipm (13,970 mm/min) |
Specifications sourced from e-ci.com — verified 2026-10-05
Strengths & Limitations
Strengths
- Largest XFORMe that still forms at 70 ipm (1,778 mm/min)
- 12 ft (3,658 mm) die surface with 23 in (584 mm) open height
- 550 ipm (13,970 mm/min) approach and return
- Quieter drive with a low-capacity fluid system
Limitations
- Bed stops at 12 ft (3,658 mm); 14 ft (4,267 mm) starts with the XFORMe 230XFe12
- Closed height of 7 in (178 mm) and open height of 23 in (584 mm) are below the 24 in (610 mm) opening of the XFORMe 350XFe10
Best For
Frequently Asked Questions
01
Same die surface, stroke, heights and throat. The XFORMe 175XFe10 forms at 70 ipm (1,778 mm/min) and returns at 550 ipm (13,970 mm/min). The XFORM 175XF10 forms at 45 ipm (1,143 mm/min) and returns at 485 ipm (12,319 mm/min). Approach is 550 ipm (13,970 mm/min) on both.
02
Stroke length is 16 in (406 mm), between a 7 in (178 mm) closed height and a 23 in (584 mm) open height. The throat measures 18 in (457 mm).
