OMAX Maxiem 1515
This model was not found in OMAX Corporation's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.
Key Specifications
Accuracy
cutting area
pump pressure
pump power
max cutting thickness
cutting speed
How much does the OMAX Maxiem 1515 cost?
Estimated price range
Our best estimate for a cnc waterjet cutting in this class — not a quote from OMAX Corporation. Configuration moves it a long way.
Overview
The OMAX Maxiem 1515 is listed as an abrasive waterjet with a square 1,524 x 1,524 mm (60 x 60 in) cutting area. OMAX does not show this model in its current lineup, and the listed figures on this page should be read as a guide for evaluating a used machine.
A square envelope is the defining trait. It takes plate remnants, tiles, blanks and short sheets without the floor length a full-sheet table needs, but a long sheet has to be cut down to 1,524 mm before loading. Shops whose parts are small and whose stock arrives in pieces lose little by that; shops buying full sheets handle every one twice.
The pump row reads 40,000 – 55,000 psi with an EnduroMAX direct-drive pump, and pump power is listed as 30 – 37 kW. Both are ranges, so the pump on a particular machine needs identifying. Maximum cutting thickness is listed as approx. 100 mm steel and 200 mm softer materials, and cutting speed as up to 3,500 mm/min, material dependent. That top speed belongs to thin, soft stock and will not be seen near the thickness limits.
Positioning accuracy is listed at ±0.076 mm (0.003 in). Control is the IntelliMAX software suite, listed with Intelli-CAM and Layout, running on a Windows-based PC.
Full Specifications
| Parameter | Value |
|---|---|
| Cutting Area | 1,524 x 1,524 mm (60 x 60 in) |
| Pump Pressure | 40,000 – 55,000 psi (EnduroMAX direct-drive) |
| Pump Power | 30 – 37 kW |
| Max Cutting Thickness | Approx. 100 mm steel; 200 mm softer materials |
| Positioning Accuracy | ±0.076 mm (0.003 in) |
| Cutting Speed | Up to 3,500 mm/min (material dependent) |
| Control System | IntelliMAX software suite (Intelli-CAM + Layout); Windows-based PC |
Specifications sourced from machinetools.com — verified 2026-03-28
Strengths & Limitations
Strengths
- Square 1,524 x 1,524 mm (60 x 60 in) listed cutting area suits remnants, tiles and short plate
- EnduroMAX direct-drive pump listed at 40,000 – 55,000 psi
- Listed cutting thickness of approx. 100 mm steel and 200 mm softer materials
- IntelliMAX software suite with Intelli-CAM and Layout on a Windows-based PC
Limitations
- No axis reaches past 1,524 mm (60 in), so long sheet must be cut down first
- Positioning accuracy is listed at ±0.076 mm (0.003 in)
- Cutting speed is listed at up to 3,500 mm/min and is material dependent
- Pressure and power are given as ranges, 40,000 – 55,000 psi and 30 – 37 kW, not as one confirmed pump
Best For
Frequently Asked Questions
01
The listed cutting area is 1,524 x 1,524 mm (60 x 60 in). It is square, so material longer than 1,524 mm in either direction has to be cut down before it can be processed.
02
The listed figures give an EnduroMAX direct-drive pump at 40,000 – 55,000 psi, with pump power of 30 – 37 kW. Because both are ranges, look at the pump on the machine being considered to see where it sits.
03
Maximum cutting thickness is listed as approx. 100 mm steel and 200 mm softer materials. Cutting speed is listed as up to 3,500 mm/min and is material dependent, so expect far lower speeds at those thicknesses.
04
The control system is listed as the IntelliMAX software suite, with Intelli-CAM and Layout, on a Windows-based PC. On an older machine, check which version is installed and what PC it runs on.
Videos
Carl SalJr
MachineryValues Inc
Community Discussions
Comparison and buying advice
Electrical and installation requirements
Links to community discussions. Summaries are editorial — visit the original thread for full context.
More from OMAX Corporation
OMAX 55100 Jet Machining Center
OMAX MAXIEM 1530
OMAX 55100
OMAX 2652 Jet Machining Center
OMAX 120X Jet Machining Center
OMAX ProtoMax Abrasive Waterjet
Other CNC Waterjet Cutting
Koike Aronson ShopJet
WardJet X-1515
