Yamazaki Mazak CNC Lathes / Turning Centers

Mazak Quick Turn SMART 200

Est. $80,000 - $130,000 Possible older model Updated 2026-10-02

This model was not found in Yamazaki Mazak's current lineup when we checked on 2026-10-02 (lineup page). It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

Tool Capacity

8-position turret

Max Turn Length

539 mm (21.22 in)

max turning diameter

380 mm (14.96 in)

max spindle speed

4,500 RPM

spindle motor power

15 kW (20 hp)

bar capacity

52 mm (2.05 in)

How much does the Mazak Quick Turn SMART 200 cost?

Estimated price range

Est.$80,000 - $130,000

Our best estimate for a cnc lathes / turning center in this class — not a quote from Yamazaki Mazak. Configuration moves it a long way.

Overview

The Mazak Quick Turn SMART 200 is listed as a basic 2-axis (X, Z) lathe: a 203 mm (8 in) chuck, a 4,500 RPM spindle listed at 15 kW (20 hp), and a turret with only 8 positions. Nothing in the listed table adds to plain turning, and the listed weight of 4,000 kg (8,818 lb) is that of a small machine.

SMART is not a name on Mazak's QUICK TURN model list. The plain turning machine in this chuck size on that list is the QUICK TURN 200 (Bolt-on), and Mazak's table for the Quick Turn 200 gives an 8 in chuck, 5,000 rpm and 12 tools. The listed SMART 200 has a slower spindle and four fewer stations than that machine, so its figures should be read as listed, not as Mazak's current specification.

The listed capacities are 380 mm (14.96 in) of turning diameter and 539 mm (21.22 in) of turning length, with 195 mm (7.68 in) of X travel, 560 mm (22.05 in) of Z and 52 mm (2.05 in) of bar capacity through an A2-6 spindle nose. Rapids are listed at 20 m/min (787 ipm) in X and 24 m/min (945 ipm) in Z. The control is listed as MAZATROL SmoothG CNC, the control Mazak describes for the series, on which G code programming is also available.

Eight stations set the limit on what runs in one setup. A part with roughing and finishing tools for both outside and inside diameters, a groove, a thread and a drill has already used most of the turret, and there is no live tool or second spindle to take further operations. The machine suits simple parts in repeat batches, where short tool lists are normal.

Full Specifications

Parameter	Value
Max Turning Diameter	380 mm (14.96 in)
Max Turning Length	539 mm (21.22 in)
Max Spindle Speed	4,500 RPM
Spindle Motor Power	15 kW (20 hp)
Bar Capacity	52 mm (2.05 in)
Spindle Nose	A2-6
Chuck Size	203 mm (8 in)
Tool Capacity	8-position turret
Number of Axes	2 (X, Z)
X Axis Travel	195 mm (7.68 in)
Z Axis Travel	560 mm (22.05 in)
Rapid Traverse X	20 m/min (787 ipm)
Rapid Traverse Z	24 m/min (945 ipm)
Machine Weight	4,000 kg (8,818 lb)
CNC Control	MAZATROL SmoothG CNC

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Listed 380 mm (14.96 in) turning diameter and 539 mm (21.22 in) turning length from a 4,000 kg (8,818 lb) machine
Listed MAZATROL SmoothG CNC, the control Mazak describes for the series
Listed bar capacity of 52 mm (2.05 in) on an A2-6 spindle nose
Simple 2-axis (X, Z) layout with a 203 mm (8 in) chuck

Limitations

The turret is listed with 8 positions, against 12 tools on Mazak's table for the Quick Turn 200
Listed 2 axes (X, Z): no milling, no Y-axis and no second spindle
Spindle power is listed at 15 kW (20 hp) with no duty rating, and no torque is listed
Listed rapids of 20 m/min (787 ipm) in X and 24 m/min (945 ipm) in Z are modest
The SMART name is not on Mazak's QUICK TURN model list

Best For

Simple turned parts that need no more than 8 tools Repeat batches of chucked parts within 380 mm (14.96 in) Bar-fed turning up to the listed 52 mm (2.05 in) Second-operation turning beside a larger machine

Frequently Asked Questions

01 How does the Quick Turn SMART 200 differ from the Quick Turn 200?

Mazak's table for the Quick Turn 200 gives an 8 in chuck, a 5,000 rpm spindle, 12 tools and Ø14 in (356 mm) of turning diameter. The SMART 200 is listed with the same 203 mm (8 in) chuck size, 4,500 RPM, a turret of 8 positions and 380 mm (14.96 in) of turning diameter.

02 Can the Quick Turn SMART 200 do milling?

Not as listed. The table gives 2 axes, X and Z, with no milling spindle, C-axis, Y-axis or second-spindle row. On Mazak's model list milling starts with the M models, for example the QUICK TURN 200M (Milling, VDI), and the Y-axis with the QUICK TURN 200MY (Milling, Y-axis, VDI).

03 Is 8 turret positions enough?

For simple parts, yes. Outside roughing and finishing, a drill, a boring bar, a groove and a thread already take six of the 8 positions. Parts needing several bores, form tools or special grooves will force tool changes between jobs or a second setup, so list the tools for your parts before choosing this machine.

04 What are the listed travels and rapids?

X travel is listed at 195 mm (7.68 in) and Z at 560 mm (22.05 in). Rapid traverse is listed at 20 m/min (787 ipm) in X and 24 m/min (945 ipm) in Z. The listed machine weight is 4,000 kg (8,818 lb).