Fanuc Robocut C600iA
Key Specifications
x y travel
z travel
max workpiece weight
wire diameter range
max cutting speed
surface finish ra
How much does the Fanuc Robocut C600iA cost?
Estimated price range
Our best estimate for a wire edm in this class — not a quote from Fanuc. Configuration moves it a long way.
Overview
The Fanuc Robocut C600iA is a wire EDM with listed travels of 600 x 400 mm in X and Y and 255 mm in Z, a maximum workpiece weight of 1,000 kg and a machine weight of 5,200 kg. FANUC's current pages do not show this model, so read the listed figures as a guide for assessing a used machine and confirm them against that machine's own documents.
Z travel of 255 mm sets the tallest section the wire can pass through, and the listed taper of ±15° is quoted at 100 mm height, so tall tapered work needs checking case by case. The RoboCut α-C600iC covers the same 600 mm (23.6 in) by 400 mm (15.7 in) in X and Y with 310 mm (12.2 in) of Z.
Wire from 0.1 to 0.3 mm in diameter is accepted. The listed maximum cutting speed is 500 mm²/min and the finish is Ra 0.2 µm in finishing mode. Those are the two ends of the trade between speed and finish, not results reached in the same pass. The control is a Fanuc CNC dedicated to the Robocut.
Full Specifications
| Parameter | Value |
|---|---|
| X Y Travel | 600 x 400 mm |
| Z Travel | 255 mm |
| Max Workpiece Weight | 1,000 kg |
| Wire Diameter Range | 0.1 – 0.3 mm |
| Max Cutting Speed | 500 mm²/min |
| Surface Finish Ra | 0.2 µm (finishing mode) |
| Max Taper Angle | ±15° / 100 mm height |
| Control System | Fanuc CNC (Robocut dedicated) |
| Machine Weight | 5,200 kg |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- 600 x 400 mm of X-Y travel with a 1,000 kg maximum workpiece weight
- Listed surface finish of Ra 0.2 µm in finishing mode
- Maximum cutting speed listed at 500 mm²/min
Limitations
- Z travel is 255 mm, against 310 mm (12.2 in) on the RoboCut α-C600iC
- Taper is listed at ±15° per 100 mm height, which excludes steeper relief angles
- Not on FANUC's current pages, so the listed figures need confirming against the individual machine
Best For
Frequently Asked Questions
01
The listed travels are 600 x 400 mm in X and Y and 255 mm in Z. Maximum workpiece weight is 1,000 kg and the machine weighs 5,200 kg, a figure to pass to whoever plans the rigging and the floor.
02
Wire from 0.1 to 0.3 mm in diameter. The listed surface finish is Ra 0.2 µm in finishing mode and the maximum cutting speed is 500 mm²/min; the speed figure belongs to roughing and the finish figure to the final passes.
03
The listed maximum taper is ±15° at 100 mm height. With 255 mm of Z travel available, ask what angle holds on sections taller than 100 mm before taking on deep tapered work.
Videos
PM Machines
Revelation Machinery
Community Discussions
Pricing and buying discussion
Links to community discussions. Summaries are editorial — visit the original thread for full context.
More from Fanuc
Fanuc ROBOCUT α-C200iB
FANUC RoboCut C600iB
