EUROMAC XT PUNCH 6-1500 CNC Punch Press
Key Specifications
Punching Force
Sheet Width
Sheet Thickness
Tool Stations
Drive
Stroke Rate
Overview
The EUROMAC XT PUNCH 6-1500 is a compact servo-electric CNC punch press from EUROMAC S.p.A., an Italian manufacturer of sheet metal working machinery. The XT PUNCH 6-1500 targets small-to-medium fabrication shops that need CNC punching capability without the investment or footprint of a large turret punch press. The machine offers 6 tons of servo-electric punching force on sheet up to 1500 mm wide, with a 6-position tool change head that handles the most common punch operations including round holes, squares, oblong slots, and simple louvers. EUROMAC's SMP (Single Multi-Purpose) tool system enables multiple geometry variations from a single tool body, reducing the number of physical tools required. The servo-electric drive delivers energy-efficient operation and precise ram control for close-tolerance punching and forming in a compact footprint of approximately 2500x2000 mm. The XT PUNCH 6-1500 is popular in European job shops, HVAC component producers, and small enclosure manufacturers as a cost-effective entry to CNC sheet metal punching.
Full Specifications
| Parameter | Value |
|---|---|
| Punching Force | 6 ton (60 kN) |
| Sheet Width | Up to 1500 mm (59 in) |
| Sheet Thickness | 0.5 – 4.0 mm mild steel |
| Tool Stations | 6-position multi-tool head |
| Drive | Servo-electric |
| Stroke Rate | Up to 600 strokes/min |
| Repositioning Speed | 80 m/min |
| Control | EUROMAC proprietary CNC (Windows-based) |
| Footprint | Approximately 2500x2000 mm |
| Power | 400V, 3-phase |
| Manufacturer | Sea Doo |
| Model | 1250 |
| Maximum Thickness | 6.35 mm |
| Horsepower | 1,818 hp |
| Hours | 215 h |
| Mileage | 82,500 mi |
| Tire Size | ST145 / R12D |
Specifications sourced from machinio.com — verified 2026-03-28
Strengths & Limitations
Strengths
- Compact footprint fits in smaller workshops where turret punch presses cannot
- Servo-electric drive: energy efficient and precise without hydraulic oil
- SMP multi-purpose tool system reduces tooling inventory requirements
- Italian engineering at competitive European pricing
- 6-position tool head handles standard punch operations without changeover
Limitations
- 6-ton force and 4mm limit restricts to light gauge sheet only
- 6-position head very limited vs 26-45 station turret punch presses
- 1500mm sheet width smaller than standard 2500mm wide turret presses
- EUROMAC brand less known outside Europe
Best For
Frequently Asked Questions
01
SMP (Single Multi-Purpose) is a tool system where a single tool body can produce multiple geometries by rotating or repositioning an adjustable punch insert. This allows a 6-position head to produce more variations than it otherwise could with conventional dedicated tools.
02
The machine handles stainless steel up to approximately 3mm at reduced stroke rates. The 6-ton force is the limiting factor for thicker stainless, which requires higher tonnage than equivalent mild steel.
03
The machine processes sheets up to 1500mm wide. Sheet length in the Y direction is limited by the machine's working zone — typically 1000-1200mm. For longer sheets, the workpiece must be repositioned manually or via an optional sheet repositioner.
Videos
WestbrookEng
EuromacChannel
Related Machines
Trumpf TruMatic 3000
Trumpf TruMatic 7000
Trumpf TruPunch 2000
Trumpf TruPunch 3000
