DMG Mori CMX 110 U

$290,000 - $420,000 Updated 2026-03-16

Key Specifications

X Travel

1,100 mm (43.3 in)

Y Travel

800 mm (31.5 in)

Z Travel

650 mm (25.6 in)

Max Spindle

12,000 RPM (15,000 RPM optional)

Spindle Taper

CAT 40 / BBT 40

Tool Capacity

30 tools standard (60, 120 optional)

Overview

The DMG Mori CMX 110 U is the largest machine in the CMX U 5-axis series, offering 1,100 x 800 x 650 mm (43.3 x 31.5 x 25.6 in) of travel and a 1,000 mm (39.4 in) diameter swivel rotary table rated for 700 kg (1,543 lb). At this table diameter and load capacity, the CMX 110 U bridges the CMX U entry-series and the larger DMU monoBlock and DMU P FD portal machines, handling workpieces and tombstone setups that exceed the capacity of smaller 5-axis platforms while maintaining significantly lower pricing than the premium duoBLOCK series.

The A-axis swivels from -35 to +110 degrees with 360-degree continuous C-axis rotation for full simultaneous 5-axis machining. Maximum workpiece dimensions reach 1,000 mm (39.4 in) diameter and 650 mm (25.6 in) height, covering full-size automotive mold inserts, large aerospace brackets, power generation components, and substantial die-cast die work that would otherwise require a DMU monoBlock or larger machine.

The spindle delivers 22 kW (30 hp) and 120 Nm (88 ft-lb) of torque at 12,000 RPM through a CAT 40 (BBT 40) taper. The 15,000 RPM option adds surface speed for aluminum. While the spindle torque is modest for the machine's size, the large table and travel make the CMX 110 U well-suited for shops whose workpiece size requirements outpace their torque requirements — a common situation in aerospace structural and mold work where large but relatively accessible features are the norm.

Rapid traverse reaches 30 m/min (1,181 ipm) on linear guides. The standard magazine holds 30 tools expandable to 60 or 120. CELOS X runs on Fanuc 31i-B5 or Siemens 840D sl. Optional PH 150 and PH 300 pallet handling systems add automation capability.

New CMX 110 U machines price between $290,000 and $420,000 — significantly below the DMU 125 monoBlock which offers more rigidity and speed for comparable or smaller work envelopes at substantially higher cost. For shops that need a 1-meter table 5-axis machine primarily for large-but-light work, the CMX 110 U offers exceptional value. Specs sourced from DMG Mori published data and dealer references.

Full Specifications

Parameter	Value
X-Axis Travel	1,100 mm (43.3 in)
Y-Axis Travel	800 mm (31.5 in)
Z-Axis Travel	650 mm (25.6 in)
A Axis Swivel	-35 to +110 deg
C Axis Rotation	360 deg continuous
Max Spindle Speed	12,000 RPM (15,000 RPM optional)
Spindle Taper	CAT 40 / BBT 40
Spindle Motor Power	22 kW (30 hp)
Spindle Torque	120 Nm (88 ft-lb)
Tool Capacity	30 tools standard (60, 120 optional)
Tool Change Time	3.0 sec tool-to-tool
Table Diameter	1,000 mm (39.4 in)
Max Table Load	700 kg (1,543 lb)
Max Workpiece Diameter	1,000 mm (39.4 in)
Max Workpiece Height	650 mm (25.6 in)
Rapid Traverse Rate	30 m/min (1,181 ipm)
Machine Weight	13,500 kg (29,762 lb)
CNC Control	CELOS X with Fanuc 31i-B5 or Siemens 840D sl
13 In	340 mm
47 In	1,185 mm
4 In	102 mm
19 In	490 mm
8 In	200 mm
Details	Strongest version for 210 kg payloadFree accessibility to the machine and the automationStrongest version for 210 kg payloadFree accessibility to the machine and the automation
Strongest Version For 210 Kg Payloadfree Accessibility To The Machine And The Automation	Strongest version for 210 kg payloadFree accessibility to the machine and the automation
Strongest Version For 210 Kg Payload	Free accessibility to the machine and the automation
Procedure	User Interface
Customer Benefits	MPC Graph: current and learned process values. / MPC Diagnostics: stock condition, number of impact and crash.

Specifications sourced from en.dmgmori.com — verified 2026-03-28

Strengths & Limitations

Strengths

1,000mm diameter table with 700 kg capacity handles large workpieces that exceed the capacity of all other CMX U models and most 5-axis platforms in this price range
1,100mm X-travel is the largest in the CMX U lineup — enables long aerospace structures, die halves, and mold bases in a single setup
Full simultaneous 5-axis capability at a price point significantly below the DMU monoBlock series for shops whose work doesn't demand premium dynamics
CELOS X with Fanuc or Siemens control provides familiarity and flexibility for shops with existing control standardization
DMG Mori global service and parts support — a key advantage over lower-cost Asian 5-axis alternatives at this price point
Compact for a 1,100mm travel machine — smaller floor footprint than comparable DMU monoBlock machines

Limitations

120 Nm spindle torque is modest for the machine size — not suited for heavy roughing in steel, titanium, or Inconel at aggressive parameters
30 m/min rapids significantly underperform the DMU monoBlock series (42 m/min) and other premium 5-axis platforms
Linear guides limit rigidity versus roller or box ways on premium machines — surface finish quality under heavy cuts may suffer
30-tool standard magazine is insufficient for complex multi-feature programs; plan to budget for expanded ATC
No integrated pallet changer — automation requires add-on PH systems
Shops expecting production-speed 5-axis dynamics should step up to the DMU 125 monoBlock

Best For

Mold and die shops machining full-size automotive and consumer product mold halves up to 1,000mm diameter Aerospace manufacturers producing large structural brackets, door components, and access panels from aluminum and light alloys Energy component manufacturers machining large impellers, cover plates, and housing components Job shops needing a 1-meter table 5-axis machine for diverse large-format work without the cost of a DMU monoBlock Shops replacing aging 5-axis or 3-axis machines for large, geometrically complex but not aggressively roughed components Die casting and injection mold shops producing medium-to-large tooling where 5-axis access matters more than high feed rates

Frequently Asked Questions

01 What does a new DMG Mori CMX 110 U cost?

New CMX 110 U machines price between $290,000 and $420,000. Base configuration with 30-tool magazine starts near $290,000. Adding 60 or 120-tool ATC, 15,000 RPM spindle, probing, high-pressure coolant, and PH automation pushes toward $420,000. Used units from 2018-2023 trade from $140,000 to $250,000.

02 CMX 110 U vs DMU 125 monoBlock — which should I choose?

If your primary need is work envelope — specifically a 1-meter table for large-but-accessible parts — the CMX 110 U saves $300,000-$500,000 over the DMU 125 monoBlock. If you need aggressive dynamics, higher rapids (42 vs 30 m/min), higher spindle torque, roller guideways for rigidity under heavy cuts, or production cycle times, the DMU 125 monoBlock is worth the premium. The CMX 110 U is the value play for shops whose bottleneck is work envelope, not cutting performance.

03 Can the CMX 110 U machine titanium?

Yes, but conservatively. The 120 Nm spindle torque requires light-to-moderate depths of cut in titanium. For production titanium work requiring aggressive material removal rates, the DMU monoBlock or DMU duoBLOCK series with higher-torque spindles are better suited. The CMX 110 U handles titanium finishing and light roughing well.

04 What is the maximum part diameter on the CMX 110 U?

The maximum workpiece diameter is 1,000 mm (39.4 in) at up to 650 mm (25.6 in) height and 700 kg (1,543 lb) weight. This covers most automotive mold halves, large aerospace panels, and medium energy components.

05 What automation is available for the CMX 110 U?

The CMX 110 U supports the DMG Mori PH 150 and PH 300 pallet handling systems for automated workpiece loading and unloading. Robot integration is also available via standardized interface ports. For full pallet pool automation, the larger DMU monoBlock or DMU P FD series with integrated LPP options offer more comprehensive solutions.