Voortman V310 CNC Plasma Drilling Line
Key Specifications
plate thickness plasma
drilling capacity
table width
table length
plasma source
drill spindle
How much does the Voortman V310 CNC Plasma Drilling Line cost?
Estimated price range
Our best estimate for a cnc plasma cutting in this class — not a quote from Voortman. Configuration moves it a long way.
Overview
The Voortman V310 CNC Plasma Drilling Line processes plate with a plasma torch and drill spindles over one table. The listed figures give plasma cutting up to 40 mm in mild steel and drilling up to 40 mm in diameter in 25 mm thick plate. This table has not been confirmed against a Voortman document, so every figure on the page is a listed figure and should be checked against the quotation.
The table can be up to 4,000 mm wide and up to 24,000 mm long, and the length is described as extendable. A bed of that length lets several plates lie in a row, so one can be loaded or cleared while another is being worked. Positioning speed is up to 20 m/min, which decides how long the machine spends travelling between features on a long layout.
Drilling is done by 2 or 3 independent drill spindles, with automatic countersinking. Note how the drilling figure is worded: 40 mm in diameter is tied to 25 mm thick plate, so the capacity in thicker material is not stated. Marking is by plasma and by punch. The plasma source is listed as a Hypertherm XPR at up to 300 A.
The control is Voortman VACAM, with IGES, DXF and DSTV named as file formats. No oxy-fuel capacity, weight or connected load is listed.
Full Specifications
| Parameter | Value |
|---|---|
| Plate Thickness Plasma | Up to 40 mm mild steel |
| Drilling Capacity | Up to 40 mm diameter in 25 mm thick plate |
| Table Width | Up to 4,000 mm |
| Table Length | Up to 24,000 mm (extendable) |
| Plasma Source | Hypertherm XPR (up to 300A) |
| Drill Spindle | 2 or 3 independent drill spindles |
| Countersink | Yes (auto) |
| Marking | Plasma and punch marking |
| CNC Control | Voortman VACAM with IGES/DXF/DSTV |
| Positioning Speed | Up to 20 m/min |
Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.
Strengths & Limitations
Strengths
- Plasma cutting up to 40 mm in mild steel and drilling up to 40 mm in diameter over one table
- 2 or 3 independent drill spindles with automatic countersinking
- Table up to 4,000 mm wide and up to 24,000 mm long, with the length extendable
- Both plasma marking and punch marking are listed
- Voortman VACAM control with IGES, DXF and DSTV
Limitations
- The 40 mm drilling figure is quoted in 25 mm thick plate; capacity in thicker plate is not listed
- Plasma thickness stops at 40 mm in mild steel and no oxy-fuel figure is given
- Spindle count is 2 or 3 depending on the build, so a given machine has to be checked
Best For
Frequently Asked Questions
01
The listed plasma figure is up to 40 mm in mild steel, with a Hypertherm XPR plasma source at up to 300 A. No oxy-fuel thickness is listed, so thicker plate should be raised with the supplier before ordering.
02
Up to 40 mm in diameter in 25 mm thick plate, using 2 or 3 independent drill spindles. Countersinking is automatic. The table does not say what diameter is possible in plate thicker than 25 mm.
03
Up to 4,000 mm wide and up to 24,000 mm long, with the length described as extendable. Positioning speed over that table is up to 20 m/min. The actual size is set per order, so measure against the quoted layout.
04
The control is Voortman VACAM, and the control row names IGES, DXF and DSTV. Parts can be marked by plasma or by punch as part of the same program, according to the marking row.
Videos
Voortman Steel Machinery
Voortman Steel Machinery
Voortman Steel Machinery
Voortman Steel Machinery
More from Voortman
Other CNC Plasma Cutting
Koike Aronson MasterGraph EX2
ESAB Vision T5 CNC Plasma Cutting System
STV CNC Optimum 4
Kinetic K5200
