Resato R-JCM 6030 CNC Waterjet Cutting Machine

$350,000 - $550,000 Updated 2026-03-17

Key Specifications

Cutting Area (X x Y)

6,000 x 3,000 mm

Z-Axis Travel

200 mm

Max Operating Pressure

800 or 1,150 bar (configuration dependent)

Positioning Accuracy

± 0.1 mm

Repeatability

± 0.05 mm

Max Cutting Speed

15,000 mm/min (rapid); material-dependent cutting speed

Overview

The Resato R-JCM 6030 is a large-format industrial CNC waterjet cutting machine with a 6,000 x 3,000 mm (approximately 236 x 118 inch) working area, designed for processing large plate and sheet materials across a wide range of industrial applications. Manufactured by Resato International in Assen, Netherlands, the R-JCM 6030 is part of Resato's Jet Cutting Machine series — gantry-based 2D and 2.5D waterjet systems built for production cutting of metals, stone, glass, composites, and rubber in heavy industrial and architectural environments.

The R-JCM 6030's gantry structure is constructed from heavy-profile welded steel with precision-machined linear guide rail seats, delivering a rigid cutting bridge capable of maintaining positional accuracy across the full 6-meter cutting length. The gantry travels on dual servo-driven linear axes with precision rack-and-pinion or ballscrew drive depending on configuration, providing smooth, coordinated motion for cutting complex contours in large plate stock. The water table and basin are fabricated from stainless steel for corrosion resistance and are designed for efficient slurry drainage and abrasive garnet recovery.

Resato integrates their own P-series high-pressure intensifier pumps with the R-JCM 6030, typically pairing the machine with an 800 bar or 1,150 bar pump unit depending on material requirements and throughput targets. The complete system includes Resato's machine control platform with an industrial PC-based CNC controller, CAD/CAM nesting software interface, and the high-pressure pump control system on a unified operator interface. The cutting head assembly supports single or dual abrasive waterjet heads, and the Z-axis configuration provides automatic height control for consistent nozzle standoff distance across workpiece surface variations.

The R-JCM 6030 is particularly well suited to architectural stone processing — granite, marble, and engineered stone countertops, flooring medallions, and facade panels — where the 6 x 3 meter work area accommodates full-size slab processing without repositioning. Steel and aluminum fabricators processing large structural plate, pressure vessel blanks, and heavy-gauge weldments also benefit from the machine's ability to process full mill-format plate without secondary handling. The machine's water bath cutting environment eliminates thermal distortion and HAZ associated with plasma or laser cutting, preserving material mechanical properties through the full cut depth.

Resato's service organization and European dealer network support the R-JCM 6030 across its primary markets in Europe, the Middle East, and Asia. For North American customers, Resato works through authorized distributor partners to provide installation, commissioning, operator training, and ongoing preventive maintenance service. The machine's modular design facilitates on-site installation in existing facilities without specialized crane requirements for standard configurations.

Full Specifications

Parameter	Value
Cutting Area (X X Y)	6,000 x 3,000 mm
Z-Axis Travel	200 mm
Max Operating Pressure	800 or 1,150 bar (configuration dependent)
Positioning Accuracy	± 0.1 mm
Repeatability	± 0.05 mm
Max Cutting Speed	15,000 mm/min (rapid); material-dependent cutting speed
Drive System	Servo-driven linear axes, rack-and-pinion or ballscrew
Cutting Head	Single or dual abrasive waterjet heads
Abrasive Type	Garnet, mesh 80 or 120
Control System	Industrial PC-based CNC with CAD/CAM interface
Table Construction	Stainless steel water basin with slat support
Certifications	CE, ISO 9001

Strengths & Limitations

Strengths

6 x 3 meter work area handles full-format stone slabs and structural steel plate without repositioning, maximizing large-part throughput
Resato's own P-series pump integration provides matched, single-source engineering accountability for the complete cutting system
Heavy-profile welded steel gantry maintains positional accuracy across full 6-meter cutting length for consistent quality on large parts
No heat-affected zone, no thermal distortion — waterjet cutting preserves material mechanical properties in metals and composites
Dual cutting head option effectively doubles throughput on parallel-cut parts or allows simultaneous roughing and finishing head configurations

Limitations

High capital cost reflects large-format machine scale — justification requires consistent large-part volume or high-value material processing
6 x 3 meter footprint demands significant floor space and facility height clearance for installation and part loading operations
European manufacturing origin may extend lead times and parts logistics for customers outside Resato's primary service territories

Best For

Architectural stone fabricators processing full-format granite, marble, and engineered stone slabs for countertops, flooring, and facade panels Steel service centers and fabricators cutting large structural plate, pressure vessel blanks, and heavy-gauge weldment blanks from full mill sheet Aerospace and industrial manufacturers cutting large aluminum, titanium, or composite sheet panels requiring precise, thermally neutral processing Job shops serving customers with oversized part requirements who need a large-format waterjet as a differentiating service capability

Frequently Asked Questions

01 What pump is paired with the R-JCM 6030?

The R-JCM 6030 is typically configured with Resato's P-800 (800 bar) or P-1150 (1,150 bar) intensifier pump depending on the customer's material mix and throughput targets. The P-1150 provides higher pressure for faster cutting of hard or thick materials, while the P-800 offers a lower entry cost for applications where maximum pressure is not required. Both pumps integrate with the R-JCM's control system via Resato's standard P-series interface.

02 Can the R-JCM 6030 cut non-metallic materials like glass and composites?

Yes. The R-JCM 6030 cuts all waterjet-compatible materials including glass, ceramics, granite, marble, carbon fiber reinforced polymer, Kevlar laminates, rubber, foam, and plastics. For glass and brittle ceramics, cutting parameters — particularly feed rate and abrasive flow — must be optimized to prevent micro-cracking. Resato provides application-specific parameter guidance for these materials.

03 What is the R-JCM 6030's typical positional accuracy?

The R-JCM 6030 achieves positional accuracy of ± 0.1 mm and repeatability of ± 0.05 mm across the full cutting area. Actual cut accuracy at the part depends on additional factors including material thickness, cutting speed, pump pressure stability, and nozzle and orifice condition. For tight-tolerance parts, Resato recommends slower quality-cut speed settings and regular nozzle and mixing tube inspection.

04 Is CAD/CAM software included with the R-JCM 6030?

The R-JCM 6030 is supplied with an industrial PC-based CNC controller that interfaces with standard waterjet CAD/CAM software. Resato can supply a compatible nesting and toolpath software package with the machine, or the customer can use existing preferred waterjet CAM software via standard DXF/DWG import and G-code output. Resato's applications team configures the software-controller interface during commissioning.

05 What are the R-JCM 6030's installation requirements?

The R-JCM 6030 requires a level, reinforced concrete floor capable of supporting the combined machine, water table, and maximum workpiece weight — typically 20,000–30,000 kg combined. Electrical supply of three-phase 380–480V at the amperage required by the paired pump and machine drives is required. A clean water supply of at least 30 L/min and a drain connection for the water table are also needed. Resato provides full site preparation specifications in the installation planning package.