Morbidelli Author 600 CNC Router

Est. $100,000 – $180,000 Possible older model Updated 2026-10-03

This model was not found in Morbidelli / SCM Group's current lineup when we checked on 2026-10-03 . It may be a superseded or older model; the specifications below are as we last recorded them.

Key Specifications

Spindle Power

13.2 kW (18 HP) electrospindle

Accuracy

±0.05 mm (±0.002 in)

working area x y z

3,120 × 1,560 × 200 mm (approx. 10×5 ft)

max spindle speed

24,000 RPM

feed rate

Up to 25,000 mm/min rapid; up to 15,000 mm/min in cut

control system

SCM XNC / Maestro CAM software

How much does the Morbidelli Author 600 CNC Router cost?

Estimated price range

Est.$100,000 – $180,000

Our best estimate for a cnc router in this class — not a quote from Morbidelli / SCM Group. Configuration moves it a long way.

Overview

The Morbidelli Author 600 is a CNC router with a working area of 3,120 × 1,560 × 200 mm (approx. 10×5 ft) and a 13.2 kW (18 HP) electrospindle that reaches 24,000 RPM. The maker no longer shows this model in its current lineup, and the listed figures are worth confirming on the machine.

The working area is a sheet-sized rectangle with 200 mm of height, which makes this a panel machine: full boards and nested parts fit, deep three-dimensional work does not. Feed rate is listed as up to 25,000 mm/min rapid and up to 15,000 mm/min in cut. Positioning accuracy is ±0.05 mm (±0.002 in).

Control is listed as SCM XNC with Maestro CAM software. At approx. 5,500 kg (12,100 lbs) the machine needs a rigger and a floor checked for the load. Nothing is listed about the table type, the tool changer or the number of controlled axes, so those are questions for the seller.

Full Specifications

Parameter	Value
Working Area X Y Z	3,120 × 1,560 × 200 mm (approx. 10×5 ft)
Spindle Motor Power	13.2 kW (18 HP) electrospindle
Max Spindle Speed	24,000 RPM
Feed Rate	Up to 25,000 mm/min rapid; up to 15,000 mm/min in cut
Positioning Accuracy	±0.05 mm (±0.002 in)
Control System	SCM XNC / Maestro CAM software
Machine Weight	Approx. 5,500 kg (12,100 lbs)

Specifications compiled from manufacturer literature and industry references. Not independently verified against a published spec sheet — confirm with the manufacturer or an authorised dealer before making a purchasing decision.

Strengths & Limitations

Strengths

Working area of 3,120 × 1,560 × 200 mm (approx. 10×5 ft) takes a full panel
13.2 kW (18 HP) electrospindle with a maximum speed of 24,000 RPM
Positioning accuracy listed at ±0.05 mm (±0.002 in)
Feed up to 25,000 mm/min rapid and up to 15,000 mm/min in cut

Limitations

The working area is 200 mm high, which rules out deep or tall workpieces
No table type, tool changer capacity or axis count is listed
Weighs approx. 5,500 kg (12,100 lbs), so moving it is a rigging job

Best For

Panel and sheet work within 3,120 × 1,560 mm Nested parts cut from boards of approx. 10×5 ft Routing at spindle speeds up to 24,000 RPM

Frequently Asked Questions

01 What size panel fits the Author 600?

The working area is listed as 3,120 × 1,560 × 200 mm, or approx. 10×5 ft, so a panel of that footprint fits. The 200 mm figure is the vertical working height and has to cover the part, the spoilboard or fixture and the tool.

02 How fast does the Author 600 run?

Feed rate is listed as up to 25,000 mm/min in rapid moves and up to 15,000 mm/min in cut. The electrospindle is 13.2 kW (18 HP) with a maximum of 24,000 RPM. Real cutting feeds depend on material and tool and will sit below the listed maximum.

03 What control and software does it use?

The control system row reads SCM XNC with Maestro CAM software. On a used machine, confirm which software licences transfer with it and whether the installed version reads your existing programs.