Machine Comparison
Mazak VC-Ez vs Mazak VCN-530C
Yamazaki Mazak vs Yamazaki Mazak · Vertical Machining Centers
Summary
The Mazak VC-Ez is a series of general-purpose vertical machining centers in several sizes; the Mazak VCN-530C is a single model with 1,050 mm (41.3 in) x 530 mm (20.9 in) x 510 mm (20.1 in) of travel. The VC-Ez figures are ranges, and the VCN-530C sits inside them on X and Y, so the choice is about which VC-Ez size is being compared.
The VC-Ez runs from 30 in (762 mm) to 64.17 in (1,630 mm) of X and 16.14 in (410 mm) to 32.08 in (815 mm) of Y, and its Z travel of 20.08 in (510 mm) to 30.12 in (765 mm) equals or exceeds the VCN-530C. Both have a 12,000 rpm spindle and 30 tools as standard. The VCN-530C offers 15,000 / 18,000 RPM spindles and 48 or 60 tools as extra-cost options.
Specifications Comparison
| Specification | Mazak VC-Ez | Mazak VCN-530C |
|---|---|---|
| X-Axis Travel | 30 in (762 mm) to 64.17 in (1,630 mm) | 1,050 mm (41.3 in) |
| Y-Axis Travel | 16.14 in (410 mm) to 32.08 in (815 mm) | 530 mm (20.9 in) |
| Z-Axis Travel | 20.08 in (510 mm) to 30.12 in (765 mm) | 510 mm (20.1 in) |
| Max Spindle Speed | 12,000 rpm | 12,000 RPM (standard); 15,000 / 18,000 RPM optional |
| Spindle Taper / Nose | CAT No.40 | BT 40 |
| Tool Capacity | 30 tools | 30 (arm-type ATC); 48 or 60 optional |
Advantages
Mazak VC-Ez
- Sizes from 30 in (762 mm) up to 64.17 in (1,630 mm) of X, so a shop can match the machine to the part
- Z travel up to 30.12 in (765 mm) on the larger models, against 510 mm (20.1 in)
- CAT No.40 taper, against BT 40 on the VCN-530C
Mazak VCN-530C
- Optional 15,000 / 18,000 RPM spindles, at extra cost, against 12,000 rpm
- Optional 48 or 60 tool magazines, at extra cost, against 30 tools
Verdict
Choose the Mazak VC-Ez when the part sets the machine size: its range covers small vise work up to plates and mold bases at 64.17 in (1,630 mm) of X, with CAT No.40 tooling. Choose the Mazak VCN-530C for mold bases, plates and fixtures within its 1,050 mm (41.3 in) X travel, when an optional 18,000 RPM spindle or a 60-tool magazine is worth paying for.