Machine Comparison
KAPP NILES KX 300 P vs KAPP NILES KX 500
KAPP NILES vs KAPP NILES · CNC Gear Cutting
Summary
The KAPP NILES KX 300 P and the KAPP NILES KX 500 are both gear grinding machines that combine generating and profile grinding. The KAPP NILES KX 500 is the larger of the two. Few comparable figures are published for this pair, so the table has a single shared row, maximum workpiece length.
On that row the KAPP NILES KX 500 takes workpieces up to 1,000 mm (39.4 in) long, against 800 mm on the KAPP NILES KX 300 P, where the figure depends on the loading system. Beyond length, the KAPP NILES KX 500 is described for larger-diameter gears, coarser pitches and wider teeth.
Specifications Comparison
| Specification | KAPP NILES KX 300 P | KAPP NILES KX 500 |
|---|---|---|
| Max Workpiece Length | 800 mm (depending on the loading system) | 1,000 mm (39.4 in) ▲ |
Advantages
KAPP NILES KX 300 P
- Sized for gears in its smaller diameter range, where the larger machine's capacity would go unused
- Suits mixed generating and profile grinding work on small and mid-size gears
KAPP NILES KX 500
- 1,000 mm (39.4 in) maximum workpiece length against 800 mm (depending on the loading system)
- Suits larger-diameter gears and coarser pitches
- Suits wide gears and gear shafts
Verdict
Both machines run the same two processes, so choose by part size. The KAPP NILES KX 500 takes longer workpieces, 1,000 mm (39.4 in) against 800 mm, and is described for larger diameters, coarser pitches and wider teeth. The KAPP NILES KX 300 P is the fit when the gears sit inside its smaller range. Only one row is comparable here, so check diameter, module and face width on each machine's own page.