Machine Comparison
Amada EG-4010 vs LVD Dyna-Press Plus
Amada vs LVD · CNC Press Brakes
Summary
The Amada EG-4010 and the LVD Dyna-Press Plus are both compact press brakes for small parts. The makers publish few comparable figures for this pair, and the three rows in the table show more in common than apart: both machines have a 150 mm stroke.
The differences are weight and control. The Amada EG-4010 weighs 2,800 kg (6,173 lb), while the LVD Dyna-Press Plus is listed at ~1,800-2,200 kg, so it is the lighter machine across its whole listed range. The Amada runs the AMNC 3i with a 15.6-inch touchscreen; the LVD uses the Touch-B touchscreen control.
Specifications Comparison
| Specification | Amada EG-4010 | LVD Dyna-Press Plus |
|---|---|---|
| Stroke | 150 mm (5.9 in) | 150 mm |
| Control | AMNC 3i (15.6-inch touchscreen) | Touch-B touchscreen |
| Machine Weight | 2,800 kg (6,173 lb) | ~1,800-2,200 kg |
Advantages
Amada EG-4010
- Aimed at small brackets and thin-gauge work
- Suits shops with limited power and cells where noise level matters
LVD Dyna-Press Plus
- Lighter machine at ~1,800-2,200 kg against 2,800 kg (6,173 lb)
- Suited to volume runs of small bends and to tight-tolerance small parts
Verdict
The table does not separate these two on bending capability: the stroke is 150 mm on both. Choose the LVD Dyna-Press Plus where floor loading or moving the machine matters, since it is listed at ~1,800-2,200 kg against 2,800 kg (6,173 lb), or for volume runs of small bends. Choose the Amada EG-4010 for small brackets and thin-gauge work in a cell with limited power or a noise limit. Compare press force and bending length on each machine's own page.